RGC Chip Resistors
Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】
4
TH
BAll Styles
TP
BA
DTP
RGC 1/16
Product Type
Style
C473
Rated resistance value marking is with 3-digit (E24) or
4-digit (E96) on the over coating.
RGC1/16 : only 3digit marking is available.
RGC1/16S,1/20 : only No marking is available.
Rated Dissipation & Size
Code
Rated Dissipation
Metric
1/16S 0.063W 1005
1608
2012
3216
Inch
0402
1/20 0.05W 0603 0201
0603
0805
1206
1/16
1/10
1/8
0.125W
(0.1W)
0.25W
(0.125W)
Temperature Coefficient of Resistance
C 50×10-6/°C
K100×10-6/°C
Tolerance on Rated Resistance
D0.5%
F1.0%
RGC1/16S
RGC1/16
RGC1/10
RGC1/8
RGC1/16
RGC1/10
RGC1/8
Rated Resistance
4-Digit
E96 Series
e.g. : 7152=71.5k ohm
3-Digit
E24 Series
e.g. : 473=47k ohm
* Packaging & Standard Qty. (Min.)
Bulk (Loose Package)
Paper Tape (2 mm pitch)
Paper Tape
Bulk Case
1,000pcs.
PA RGC1/20
Press-Pocket
Paper Tape (2mm pitch)
15,000pcs.
10,000pcs.
5,000pcs.
25,000pcs.
10,000pcs.
5,000pcs.
*Refer to Tape and Packaging information on pages 52 and 53.
•Part Number Description
Example
KAMAYA OHM
FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & PRECISION
•Features
1. Suitable for precision applications.
2. High stabilized characteristics and Performance equivalent to thin-
film chip resistors.
3. Precise Dimension by Laser-scriber method (RGC1/20).
4. Press Pocket Taping Package (RGC1/20).
5. Please contact KAMAYA for Halogen and Antimony free product of
RGC series.
6. Stability Class : 5%
RGC
•Dimensions
Unit : mm
*Values for reference
RGC1/8 0.15 3.20.15 0.1 0.25 0.25 9mg
5mg
2mg
0.6mg
RGC1/10 1.25 0.102.00.1 0.1 0.2 0.2
RGC1/16 1.60.1 0.45 0.10 0.25 0.10 0.1
0.05
RGC1/16S 0.05 1.00.051005
1608
2012
3216
0.35 0.05 0.1 0.05
0.1
Style WLMetric
0402
0603
0805
1206
Inch Hcd
*Unit weight/pc.
0.25
0.15
0.05
0.8
W
dd
L
cc
H
0.5
1.6
0.6
0.6
0.2
0.16mgRGC1/20 0.03 0.60.030603 0.23 0.03 0.050201 0.150.3 0.1
0.4
0.5
0.3
0.4
0.5
NEW
*
Please contact Kamaya sales department for 1mm pitch taping of RGC1/16s, 1/20.
0.1W
(0.063W)
ⴱIf Category Temperature Range is
"–55~+155", Rated Dissipation is
applied to in ( ).
Percentage of the rated dissipation(%)
KAMAYA OHM
FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & PRECISION
RGC
•Ratings
Ambient Temperature (°C)
100
0
55 125 155
70
•Derating Curve
The derated values of dissipation for temperatures in excess of 70°C
shall be indicated by the following Curve.
ⴱ1 If Category Temperature Range is "–55~+155", Rated Dissipation is applied to in ( ).
Description Requirements
No breakdown or flashover
R≥1G ohm
Test Methods
Clause 4.7
Clause 4.13
Clause 4.23
Clause 4.25.1
Clause 4.17
Clause 4.18
Clause 4.19
Clause 4.32
Clause 4.33
RGC1/20 50Va.c.,60s
RGC1/16S, 1/16, 1/10, 1/8 100Va.c.,60s
The applied voltage shall be 2.5 times of the rated voltage or twice of the limiting
element voltage, whichever is the less severe, 2s.
Dry/Damp heat (12+12h cycle), first cycle./
Cold/Damp heat (12+12h cycle), remaining
cycle. /D.C.Load.
Rated voltage, 1.5h"ON", 0.5h"OFF", 70°C, 1,000h.
235°C, 2s
After immersion into the flux, the immersion into solder shall be carried out in Solder bath at 260°C for 5s.
5 cycles between −55°C and +125°C
ⴱ2
(+155°C).
5N, 10s (RGC1/20 : 3N)
Amount of bend : 3 mm
Voltage proof
Overload
Climatic sequence
Endurance at 70°C
Solderability
Resistance to soldering heat
Rapid change of temperature
Adhesion
Bend strength of the face plating
•Climatic Category
55/125/56 ⴱ2(55/155/56)
Lower Category Temperature
−55°C
ⴱ2
(–55°C)
Upper Category Temperature
+125°C
ⴱ2
(+155°C)
Duration of the Damp heat,
Steady-State Tes
t
56 days
ⴱ2
(56 days)
∆R≤±(1%+0.05 ohm)
No visible damage, legible marking
In accordance with Clause 4.17.4.5
∆R≤±(1%+0.05 ohm)
∆R≤±(1%+0.05 ohm) No visible damage
∆R≤±(5%+0.1 ohm) No visible damage
∆R≤±(5%+0.1 ohm)
No visible damage, legible marking
∆R≤±(5%+0.1 ohm) No visible damage
∆R≤±(5%+0.1 ohm) No visible damage
No visible damage
∆R≤±(1%+0.05 ohm)
Clause 4.8 Measuring temperature : +20°C/+125°C ⴱ2(+155°C) /+20°C
Variation of resistance with temperature
See Ratings Table
Clause 4.24
40°C, 95%R.H., 56 days, test a) and b) of Clause 4.24.2.1
Damp test, steady state
Clause 4.25.3
125°C
ⴱ2
(155°C), no-load, 1,000h.
Endurance at the upper category temperature
Style
Size
Metric
(Inch)
Limiting Element
Voltage
V
100
50
100
100
50
100
50
50
K
K
K
C
C
100
50
K
C
K
C
C
Temperature Coefficient
of Resistance
Tolerance on
Rated Resistance
Rated Resistance Range
101001k1M
Isolation
Voltage
V
Category Temperature
Range
°C
50
150
200
D(0.5%)
F(1%)
D(0.5%)
F(1%)
D(0.5%)
F(1%)
F(1%)
D (0.5%), F (1%)
F(1%)
D (0.5%), F (1%)
Rated Dissipation
at 70°C
W
0.1
ⴱ
1
(0.063)
0.125
ⴱ
1
(0.1)
0.063
0.25
ⴱ
1
(0.125)
RGC1/16S
RGC1/16
RGC1/10
RGC1/8
100
500
55125
ⴱ
1(
55155
)
55155
25 50 55125
10-6/°cCode
1097.6
1001M
51976
1k1M
1.02M3.3M
3.39.76
1097.6
1001M
1.02M3.3M
3.3
9.76
3.3
9.76
104.7M
103.3M
ⴱ2
ⴱ2 ( ) on Derating Curue, Climatic Category, and Test Methods will be applied, when Upper Category Temperature is +155°C.
1005
(0402)
0.05
RGC1/20
0603
(0201)
1608
(0603)
2012
(0805)
3216
(1206)
Area of recommended operation
Note1. E24, E96 are avaialable for "F"(1%) and "D"(0.5%)
Note2. Rated Voltage = (Rated Dissipation)×(Rated Resistance). (d.c. or a.c. r.m.s. Voltage)
Note3. Limiting Element Voltage can only be applied to resistors when the resistance value is equal to or higher than the critical resistance value.
Note4. Critical Resistance Value is the resistance value at which the rated voltage is equal to the limiting element voltage.
•Performance Characteristics JIS C 5201-1 : 1998
5
Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. 【RoHS】
Chip Resistors
RGC
