AFBR-24x9xZ 50 MBd Miniature Link Fiber Optic Receiver Data Sheet Description Features The AFBR-24x9Z series components provide cost effective, high performance fiber optic communication links for information systems and industrial applications with link distances of up to 3 km. The receivers are directly compatible with popular "industry-standard" connectors: ST(R) and SMA. They are designed for use with 62.5/125 m multi mode fiber. * RoHS-compliant * Works with Avago HFBR-14xxZ (820 nm LED) transmitter * Data transmission at signal rates from 100 kBd up to 50 MBd * Receiver: Integrated PIN diode and digitalizing IC with CMOS/TTL output logic * Up to 3 km distance with Multimode Glass Fiber Cable AFBR-24x9xZ Available Part Numbers * Operating temperature range of -40 C to +85 C Part Number Description * Compatible with 10Base-FL standard AFBR-2409Z Receiver with SMA port * 3.3 V and 5 V supply voltage operation AFBR-2419Z Receiver with ST port * RSSI output AFBR-2419TZ Receiver with threaded ST port AFBR-2419MZ Receiver with metal ST port Applications * Optical transmission from 100 kBd up to 50 MBd * Industrial control and factory automation Link Length * High voltage isolation Data Rate (MBd) Max. Distance (m) Fiber Size (m) Transmitter * Elimination of ground loops 20 3000 62.5/125 HFBR-1414Z * Reduces voltage transient susceptibility 32 2200 62.5/125 HFBR-1414Z 40 1500 62.5/125 HFBR-1414Z * Power substation automation 50 1000 62.5/125 HFBR-1414Z Verified with PRBS7 pattern at min. Tx optical power -19 dBm avg (-16 dBm pk. as specified in HFBR-1414Z data sheet). Package and Handling Information AFBR-24x9xZ Low-Cost 50 MBd Receiver Package Information Description The receiver is housed in a low-cost, dual-inline package that is made of high strength, heat resistant, chemically resistant, and UL 94V-O flame retardant ULTEM(R) plastic (UL File #E121562). The receivers (suffix Z, TZ) are easily identified by the dark grey color connector port. A metal port option is also available (suffix MZ). The metal port option components have an internal electrical connection between the metal port and the four grounding pins, as shown in the package outline drawing. Signal ground is separate from the four grounding pins to give flexibility in connecting the port to signal or chassis ground. The package is designed for auto-insertion and wave soldering so it is ideal for high volume production applications. The AFBR-24x9xZ fiber optic receiver is designed to operate with the Avago Technologies HFBR-14xxZ fiber optic transmitters and multimode glass fiber cable. Consistent coupling into the receiver is assured by the optical system with lens. The receiver output is a digital CMOS/TTL signal. The AFBR-24x9xZ receiver contains an IC with integrated photodiode which directly converts the incoming optical signal to a digital output signal without the requisite for additional external circuitry. Because of its integrated design, the receiver has very high EMC resistance. A wide receiver dynamic range and high sensitivity over temperature is achievable. The data rate typically goes from 100 kBd to 50 MBd. A monitor (RSSI) output, which delivers an output current proportional to the average incoming light power, is available. Handling and Design Information Each part is delivered with a protective port cap or a plug covering the optics. These caps/plugs will vary by port style. When soldering, it is advisable to leave the protective cap on the unit to keep the optics clean. Good system performance requires clean port optics and cable ferrules to avoid obstructing the optical path. Clean compressed air often is sufficient to remove particles of dirt; methanol on a cotton swab also works well. For an almost noise-free RSSI-signal smoothing components are recommended. A capacitor in parallel to the resistor on the RSSI output reduces potential high frequency signal parts. The use of a single 100 nF capacitor for signal smoothing is sufficient in most common applications, as shown in the Recommended Receiver Circuitry section on page 4. If this RSSI function is not required, the output pin can be left floating. The RSSI-signal is derived from internal controlling loops; therefore, the typical time constant of pure RSSI output current without an external filter can be up to 1 ms. This time constant also depends on the actual average incoming light power. Absolute Maximum Ratings Parameter Symbol Min Max Unit Storage Temperature TS -40 +85 C Operating Temperature TA -40 +85 C Supply Voltage VCC -0.3 5.5 V Maximum DC Output Current IO 10 mA Voltage at RSSI Output VRSSI VCC+0.3 V Lead Soldering Cycle - Temp TSOLD 260 C Note 1 Lead Soldering Cycle - Time tSOLD 10 s Note 1 Electrostatic Discharge Voltage Capability ESDHBM 2000 V Note 2 Electrostatic Discharge Voltage Capability ESDMM 400 V Note 3 -0.3 Note: 1. 1.6 mm below seating plane. 2. ESD capability for all pins HBM (Human Body Model) according to JEDEC JESD22-A114. 3. ESD capability for all pins MM (Machine Model) according to JEDEC JESD22-A115. 2 Reference Electrical/Optical Characteristics -40 C to +85 C, 3.135 V < VCC < 5.25 V Typ [1] Parameter Symbol Min Max Unit Condition Reference Optical Input Avg. Power Range (40 MBd proprietary) PIN-40 -30 0 dBm DR = 40 MBd Notes 2,3,4 Optical Input Avg. Power Range (50 MBd proprietary) PIN-50 -27 0 dBm DR = 50 MBd Notes 2,3,5 Optical Input Average Power Range (10Base-FL) PIN-10B -32.5 0 dBm DR = 10 Mbps (biphase-coded) Notes 2,3,6 Optical Spectrum Range IN 792 865 nm peak wavelength Data Rate DR 0.1 50 MBd Propagation Delay tRD Supply Voltage VCC Supply Current ICC High Level Output Voltage VOH Low Level Output Voltage VOL Output Rise Time (10-90%) tR Output Fall Time (90-10%) tF Pulse Width Distortion PWD Total Jitter TJ RSSI Output Responsivity IRSSI/PIN 0.3 Voltage at RSSI Output VRSSI 0 820 27 ns 3.135 2.4 Note 7 PIN = -20 dBm avg. 5.25 V 11 20 mA RL = 2 k VCC-0.3 VCC V RL = 2 k 0.2 0.4 V RL = 2 k 5 ns CL = 10 pF Notes 2,4 5 ns CL = 10 pF Notes 2,4 5 ns PIN = -30 dBm avg. Note 4,9 15 ns PIN = -32.5 dBm avg. Note 6 0.9 A/W Note 8 VCC-1 V Note 8 -5 0.65 Notes: 1. Typical data are at 25 C, VCC = 5.0 V. 2. In recommended receiver circuit, with an optical signal from the recommended transmitter circuit, transmitted via 62.5/125 m MM fiber. 3. Condition for sensitivity limit: Total Jitter 0.6 UI (unit intervals). 4. Verified with a PRBS7 signal with mark ratio = 1/2 running at 40 MBd. 5. Verified with a PRBS7 signal with mark ratio = 1/2 running at 50 MBd. 6. Verified with a jitter-free Manchester coded pseudo random sequence running at 20 MBd (~10 Mbit/s) as optical input signal. 7. The device does not support DC operation. Hence any static low or high at the input will cause an undefined output signal. 8. The RSSI current output has been verified with an external resistor RRSSI=2 k 9. The PWD is valid for the receiver only, assuming an ideal 50% duty cycle optical input signal. PWD = PWOUT-AVG - PWIN-AVG Operation with unbalanced pattern (mark ratio 1/2 or DC 50%) will cause a higher PWD than what is specified in this table. Pin Description Pin Name Function Reference 1 NC NC 1 2 /DO Data Out inverted (CMOS/TTL logic) 2 3 VCC 5V/3.3V Supply Voltage 4 NC NC 1 5 NC NC 1 6 RSSI Received Signal Strength Indicator Output 7 GND Ground 8 NC NC 4 3 2 1 5 6 7 8 PIN NO. 1 INDICATOR BOTTOM VIEW 1 Notes 1. Pins 1, 4, 5 and 8 are connected together internally. The metal port option components (suffix MZ) have an internal electrical connection between the metal port and the four grounding pins 2. The data output provides an inverted signal, thus an electrical low in case of light on and vice versa. 3 RXVCC Recommended Receiver Circuitry 1 H L1 C1 C2 10 F 100 nF GND LL VCC RSSI DO GND PHY DO 1 4 5 8 Rx 3 6 2 7 C3 2k AFBR-24x9xZ RRSSI GND Monitoring VRSSI 100 nF GND GND GND VRSSI - mV 1E+03 0.9 85 C 25 C -40 C 50 MBd 20 MBd 0.8 IRSSI/PIN - A/W 1E+04 GND 1E+02 1E+01 1E+00 0.7 0.6 0.5 0.4 1E-01 -30 -20 -10 PIN - OPTICAL INPUT POWER - dBm 0.3 0 Figure 1. Typical RSSI output voltage across RRSSI = 2 k -50 0 50 T - TEMPERATURE - C 100 Figure 2. Typical Responsivity vs. Temperature Note: To provide a suitable monitoring voltage , choose the value of RRSSI according to the particular optical power situation. For the characterization of the responsivity, 2 k was used. The lower the power, the higher the resistor value should be. Do not, however, override the max. limit of VRSSI. Recommended Transmitter Driver Circuitry using HFBR-14x4xxZ R3 C3 HFBR-14x4xxZ 33 33 270 75 pF 2 12 Data 13 IC1D 11 4 5 9 10 4 IC1A 3 IC1B 6 C1 C2 10 F 100 nF GND GND 2 6 7 3 HFBR-14x4xxZ AN2 AN6 AN7 CAT Tx R2 R1 R3 1 TXVCC = 5.0V IC1C 8 74ACTQ00MTC GND GND LL R2 8 5 4 1 R1 C3 Transmitter Mechanical Dimensions - SMA Port AFBR-2409Z 12.7 (0.50) AVAGO COUNTRY AFBR-2409Z RX YYWW 1/4 - 36 UNS 2A THREAD Note: Dimensions are in millimeters (inches). 22.2 (0.87) 6.35 (0.25) 12.7 (0.50) 6.4 (0.25) DIA. 3.81 (0.15) 5.1 (0.20) 10.2 (0.40) 1.27 (0.05) 2.54 (0.10) 4 5 2.54 (0.10) 2 3 7 6 PINS 1,4,5,8 0.51 X 0.38 (0.020 X 0.015) 3.6 (0.14) 1 8 PINS 2,3,6,7 0.46 DIA. (0.018) PIN NO. 1 INDICATOR Mechanical Dimensions - Threaded ST Port AFBR-2419TZ 12.7 (0.50) 4.9 MAX. (0.193) AVAGO COUNTRY AFBR-2419TZ RX YYWW 5.1 (0.20) Note: Dimensions are in millimeters (inches). 8.4 (0.33) 27.2 (1.07) 7.6 (0.30) 6.35 (0.25) 12.7 (0.50) 7.1 DIA. (0.28) 2.54 DIA. (0.10) 4 5 2 3 7 6 PIN NO. 1 INDICATOR 5 1.27 (0.05) 2.54 (0.10) 1 8 PINS 2,3,6,7 0.46 DIA. (0.018) 5.1 (0.20) 3/8 - 32 UNEF - 2A 3.81 (0.15) PINS 1,4,5,8 0.51 x 0.38 (0.020 x 0.015) 3.6 (0.14) 10.2 (0.40) Mechanical Dimensions - ST Port AFBR-2419Z AVAGO COUNTRY AFBR-2419Z RX YYWW 12.7 (0.50) 4.9 MAX. (0.193) Note: Dimensions are in millimeters (inches). 8.3 (0.32) 27.2 (1.07) 6.35 (0.25) 12.7 (0.50) 7.0 DIA. (0.28) 3.81 (0.15) 3.6 (0.14) 1.27 (0.05) 2.54 (0.10) 2.54 (0.10) 2 3 7 6 4 5 PINS 1,4,5,8 0.51 x 0.38 (0.020 x 0.015) 10.2 (0.40) 5.1 (0.20) 1 8 PINS 2,3,6,7 0.46 DIA. (0.018) PIN NO. 1 INDICATOR Mechanical Dimensions - Metal ST Port AFBR-2419MZ 12.7 (0.50) AVAGO COUNTRY AFBR-2419MZ RX YYWW 4.9 MAX. (0.193) Note: Dimensions are in millimeters (inches). 8.4 (0.33) 27.2 (1.07) 6.35 (0.25) 12.7 (0.50) 7.0 DIA. (0.28) 3.81 (0.15) 2.54 (0.10) 10.2 (0.40) 1.27 (0.05) 2.54 (0.10) 7 6 4 5 2 3 5.1 (0.20) 1 8 PINS 1,4,5,8 0.51 x 0.38 (0.020 x 0.015) PINS 2,3,6,7 0.46 DIA. (0.018) DIA. 3.6 (0.14) PIN NO. 1 INDICATOR For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright (c) 2005-2013 Avago Technologies. All rights reserved. AV02-3868EN - August 2, 2013