Ordering number : EN*A1053A Thick-Film Hybrid IC STK760-710A-E Single-phase Rectification PFC Hybrid IC Overview The STK760-710A-E is a power hybrid IC that incorporates active devices including a bridge diode, IGBT, FRD and a driver circuit necessary for configuring a power factor correction (PFC) circuit in the same package. Applications * Power rectification for air conditioners and general-purpose inverters as a single-phase rectification active converter. Features * Power devices including a bridge diode, IGBT, and FRD necessary for configuring a PFC circuit are integrated in a single package. * Full switching PFC circuit for single-phase 200V/15A can be configured. * Significantly increased flexibility in mounting in end products Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. 70908HKIM No. A1053-1/6 STK760-710A-E Specifications Absolute maximum ratings at Ta = 25C, Tc = 25C otherwise unless specified. Parameter Symbol IGBT Collector-to-emitter voltage VCES (TR1+TR2) Gate-to-emitter voltage VGES Repetitive peak collector current ICP Conditions Ratings unit 600 *1 V 20 V 120 A Collector current IC 43 A Allowable power dissipation Pd 83 W 600 V BD Diode reverse voltage VRM (D1 to D4) Peak one cycle surge current IFSM I2t value *2 I 2t Forward Current 220 A 180 A2s 33 A 15 A IF FRD Peak one cycle surge current IFSM (D5) Forward current IF 8 A Allowable power dissipation Pd 13 W 600 V 210 A FRD Peak repetitive reverse voltage VRM (D6) Peak one cycle surge current IFSM *1 *2 Forward current IF 33 A Allowable power dissipation Pd 58 W Supply voltage (Pin 8) VCC 20 V Signal pin input voltage (Pin 9) VIN VCC V Switching frequency fc Under the operating conditions of the 25 kHz 15 Arms 150 C -20 to +100 C application circuit Input current (in steady state) IIN(AC) Under the operating conditions of the application circuit. Tc=100C, fc=20kHz Junction temperature Tj Operating case temperature Tc Center of the resin package on the reverse side Storage temperature Tstg Tightening torque -40 to +125 Dielectric strength voltage VINS Sine wave, 50Hz, AC 1 minute *4 C 1.0 N*m 2000 VRMS Screw installation part *3 *1. Repetitive peak current with the duty ratio of D=0.1 and tp=1ms. *2. 50Hz sine wave, non-repetitive one cycle peak current. *3. The flatness of the heat sink to be connected must be 0.15mm or less. *4. Test conditions: AC 2500V for 1 second. Electrical Characteristics at Tc=25C Parameter Symbol Conditions min typ max unit IGBT Collector-to-emitter cutoff current (TR1+TR2) Collector-to-emitter saturation voltage (TR1+TR2) Gate threshold voltage Junction-to-case thermal resistance ICES VCE(sat) VGE(th) VCE=600V VGR=15V, IC=20A (Tc=25C) 1.4 VGR=15V, IC=20A (Tc=100C) 1.55 VCE=VGE, IC=430A j-c 3.75 200 A 1.9 V 5.75 A V C/W 1.5 D1 to D4 Diode reverse current IR VR=600V Forward voltage VF IF=20A (10ms Pulse) Junction-to-case thermal resistance j-c 10 1.1 1.5 A V C/W 2.9 D5 Forward voltage VF Junction-to-case thermal resistance j-c IF=5A (10ms Pulse) 1.2 9 1.6 V C/W Continued on next page. No. A1053-2/6 STK760-710A-E Continued from preceding page. Parameter Symbol Conditions min typ max unit D6 Diode reverse current IR VR=600V Forward voltage VF IF=20A (10ms Pulse) Junction-to-case thermal resistance j-c 100 1.7 2.1 A V C/W 2.15 Drive circuit / Output block VIN(ON) Threshold voltage VIN(ON)th VIN=VCC=VC, IC=430A IIN(leak) VIN=0 to 15V, VCC=15V, VIN Leak current (Pin 9) 4.1 VCE=0V Switching time tON IC=20A, VCC=15V, RCC=22 110 tOFF RB=39, Inductive load 300 trr IF=20A, di/dt=-100A/s 40 6.3 V 10 A ns 1.4 ns ns Package Dimensions unit:mm (typ) 56.0 1 25.3 6.2 11.4 2.5 (11.4) R1.7 25.8 3.4 5.5 18 5.0 0.6 2.54 21.59 0.5 2.0 3.2 17 2.54=43.18 2.0 46.2 50.0 62.0 No. A1053-3/6 STK760-710A-E IC - VCE(sat) 90 80 70 60 50 40 30 20 70 60 50 40 30 20 10 10 0 0 0 0.5 1.0 1.5 2.0 2.5 Collector-to-Emitter Voltage, VCE - V 0 3.0 60 D6 50 40 30 D5 20 10 1.0 0 2.0 ITF02484 TR1+TR2 Ta=25C 90 80 70 60 50 40 30 20 10 0 0 0.5 1.0 1.5 2.0 Forward Voltage, VF - V 2.5 3.0 0 50 Pd - Tc 40 30 20 10 0 Allowable Power Dissipation, Pd - W 50 150 ITF02486 Pd - Tc 70 D1 to D4 Ta=25C 100 Cace Temperature, Tc- C ITF02485 60 Allowable Power Dissipation, Pd - W 1.5 Pd - Tc 100 Allowable Power Dissipation, Pd - W D5, D6 Tc=25C PE=250s 0.5 Forward Voltage, VF - V ITF02483 IF - VF 70 Forward Current, IF - A D1 to D4 Tc=25C PW=250s 90 Forward Current, IF - A Collector Current, IC - A 80 IF - VF 100 TR1+TR2 Tc=25C VG=15V, PW=250s D5, D6 Ta=25C 60 50 D6 40 30 20 D5 10 0 0 50 100 Cace Temperature, Tc- C 150 ITF02487 0 50 100 Cace Temperature, Tc- C 150 ITF02488 No. A1053-4/6 STK760-710A-E Equivalent Circuit Diagram P VCC C 5 8 16 D6 AC1 1 18 D2 K D1 TR3 D4 3 AC2 TR1 R1 D3 TR2 D5 R2 VIN 9 TR4 10 GND SUB 7 12 14 N VGR E N.C pin: 11, 13 Sample Application Circuit L1 5 Iin(AC) VAC=200V 1 5mH 16 P AC1 C Ri Ci 2.2F LF K VB 18 AC2 3 VCC=15V RCC 8 IC1 Signal VCC 22 RB 9 VIN Cs 39 Co 2.2F 470Fx2 11 NC 10 GND SUB N 7 12 VGR E 14 NC 13 RS 0.01/5W 0V No. A1053-5/6 STK760-710A-E SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of July, 2008. Specifications and information herein are subject to change without notice. PS No. A1053-6/6