0.5 AMP SURFACE MOUNT SILICON RECTIFIERS
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating 25 C ambient temperature uniess otherwies specified.
Single phase half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TYPE NUMBER
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
.375"(9.5mm) Lead Length at TL=75 C
Peak Forward Surge Current, 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Maximum Instantaneous Forward Voltage at 0.5A
Maximum DC Reverse Current Ta=25 C
at Rated DC Blocking Voltage Ta=100 C
Typical Junction Capacitance (Note 1)
GL34A GL34B GL34D GL34G GL34J GL34K GL34M UNITS
50 100 200 400 600 800 1000 V
50 100 200 400 600 800 1000 V
35 70 140 280 420 560 700
0.5
30
5.0
50
8.0
-65 +175
V
A
A
V
mA
mA
pF
NOTES:
1. Measured at 1MHz and applied reverse voltage of 4.0V D.C.
2. Thermal Resistance from Junction to Ambient.
GL34A THRU GL34M
1.2 1.3
Typical Thermal Resistance RqJA (Note 2) 50
VOLTAGE RANGE
50 to 1000 Volts
CURRENT
0.5 Ampere
FEATURES
MECHANICAL DATA
* Low forward voltage drop
* Low leakage current
* High reliability
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame retardant
* Metallurgically bonded construction
* Polarity: Color band denotes cathode end
* Mounting position: Any
* Weight: 0.0036 grams
Operating and Storage Temperature Range TJ, TSTG C
C/W
Dimensions in inches and (millimeters)
MINI MELF /GL-34
.068(1.767)
.060(1.524)
.150(3.180)
.130(3.327) .022(.559)
.016(.406)
SOLDERABLE
ENDS
.1
1.0
10
100
RATING AND CHARACTERISTIC CURVES (GL34A THRU GL34M)
FIG.3 - TYPICAL REVERSE
CHARACTERISTICS
REVERSE LEAKAGE CURRENT, (mA)
PERCENTAGE RATED PEAK REVERSE VOLTAGE
0 20 40 60 80 100 120 140
.01
FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE
AVERAGE FORWARD CURRENT,(A)
Tj=100 C
Tj=25 C
FIG.4-MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT
0.1
0
0.2
0.3
0.4
0.5
0.6
LEAD TEMPERATURE ( C)
Single Phase
Half Wave 60Hz
Resistive Or Inductive Load
0.1
1.0
.01
10
50
FIG.1-TYPICAL FORWARD
CHARACTERISTICS
INSTANTANEOUS FORWARD CURRENT,(A)
FORWARD VOLTAGE,(V)
Pulse Width 300us
1% Duty Cycle
.6 .8 1.0 1.2 1.4 1.6 1.8 2.0
3.0
Tj=25 C
FIG.5-TYPICAL JUNCTION CAPACITANCE
REVERSE VOLTAGE,(V)
JUNCTION CAPACITANCE,(pF)
35
30
25
20
15
10
5
0 .01 .05 .1 .5 1 5 10 50 100
PEAK FORWAARD SURGE CURRENT,(A)
10
0
20
30
40
50
NUMBER OF CYCLES AT 60Hz
1 10 5 50 100
Tj=25 C 8.3ms Single Half
Sine Wave
JEDEC method
0 20 40 60 80 100 120 140 160 180 200
