06/25/2012 HPL-ED2012 V1.1 EN 1 / 4

Part�no. PKE-SWD-32

Article�no. 126895

Product range   SmartWire-DT slave

Basic function   Motor protection

Motor protection for heavy starting duty

Product range   Accessories

starter.

1 electrical interlock for the surface mounting of reversing starters.

1-0-A switch for manual or automatic operation.

Selectable overload relay function (ZMR) for switching off the contactor

on overload.

Wiring sets DILM 12-XRL and PKZM0-XRM12 cannot be used.

Messages   Switch position contactor/PKE/1-0-A switch

Motor current in %

Thermal motor image in %

Trip indications (Overload, Short-circuit,...)

included as standard.

For use with   DILM(C)7… - DILM(C)32

Connection to SmartWire-DT   yes

Connection type   Push in terminals

• Take into account the max. current consumption of the contactor coils per SmartWire-Darwin line.

• A2 connections must not be bridged.

• Wiring sets DILM 12-XRL and PKZM0-XRM12 cannot be used.

• Additional SWD contactor module required fir actuation of reversing starter.

IEC/EN 60947

Dimensions (W x H x D)  mm 45 x 38 x 76

Weight  kg 0.04

Mounting   on DILM7…DILM32

Mounting position   as DILM7 to DILM32

Ambient�conditions,�mechanical

Protection type (IEC/EN 60529, EN50178, VBG 4)   IP20

Vibrations (IEC/EN 61131-2:2008)   

Constant amplitude 3,5 mm  Hz 5 - 8.4

Constant acceleration 1 g  Hz 8.4 - 150

Overvoltage category   II

Pollution degree   2

06/25/2012 HPL-ED2012 V1.1 EN 2 / 4

Electrostatic discharge (IEC/EN 61131-2:2008)   

Air discharge (Level 3)  kV 8

Contact discharge (Level 2)  kV 4

Electromagnetic fields (IEC/EN 61131-2:2008)   

80 - 1000 MHz  V/m 10

1.4 - 2 GHz  V/m 3

2 - 2.7 GHz  V/m 1

Radio interference suppression (SmartWire-DT)   EN 55011 Class A

Ambient temperature  °C -25 - +60

Condensation   Take appropriate measures to prevent condensation

Storage  °C -30 - +70

relative humidity, non-condensing (IEC/EN 60068-2-30)  % 5 - 95

Station type   SmartWire-DT slave

Address allocation   automatic

SmartWire-DT status LED  LED green/orange

Connections   Plug, 8-pole

Connection   External device plug SWD4-8SF2-5

for DILM 7-9  mA 125

for DILM 12-15  mA 188

for DILM 17-38  mA 500

Holding power   

for DILM 7-9  W 3

for DILM 12-15  W 4.5

for DILM 17-38  W 0.5

Holding current   

for DILM 17-38  mA 21

for DILM 12-15  mA 188

Connection type   Push in terminals

Terminal�capacities

Flexible with ferrule  mm20.25 - 1.5

Technical�data�ETIM�4.0

Radiostandard Bluetooth   No

Short-circuit protective device, outputs available   No

Type of voltage (input voltage)   DC

06/25/2012 HPL-ED2012 V1.1 EN 3 / 4

Flush mounting plates possible   No

Height  mm 38

Performance level acc. to EN ISO 13849-1   A

Number of HW-interfaces other   2

Number of outputs   1

Supporting protocol for PROFIsafe   No

Supply voltage DC  V 15

Supply voltage AC 60 Hz  V 0

With optical interface   No

Wall mounting/direct mounting   No

Supporting protocol for Data-Highway   No

Voltage type of supply voltage   DC

Supporting protocol for CAN   No

Type of electric connection   Spring clamp connection

Category to EN 954-1   1

Number of inputs   0

Permitted voltage at input  V 15

Number of HW-interfaces RS232   0

Rack-mounting possible   No

Input current at signal 1  mA 0

Supporting protocol for SafetyBUS p   No

Fieldbus connection over separate bus terminal possible   YES

Depth  mm 77.3

SIL according to IEC 62061   0

Supporting protocol for EIB   No

SIL according to IEC 61508   0

Output current  A 0.5

Type of digital output   -

Radiostandard WLAN 802.11   No

Associated apparatus (Ex ia)   No