Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications CBR Series, C0G Dielectric, Ultra High Q, Low ESR, 6.3 - 500 VDC (RF & Microwave) Overview KEMET's CBR Series surface mount multilayer ceramic capacitors (MLCCs) in C0G dielectric feature a robust and exceptionally stable copper electrode dielectric system that offers excellent low loss performance (High Q). These devices provide extremely low ESR and high self-resonance characteristics, and are well-suited for resonant circuit applications or those where Q and stability of capacitance characteristics are required. CBR Series capacitors exhibit no change in capacitance with respect to time and voltage, and boast a negligible change in capacitance with reference to ambient temperature. Capacitance change is limited to 30 ppm/ C from -55C to +125C. CBR Series devices are suitable for many circuit applications including RF power amplifiers, mixers, oscillators, low noise amplifiers, filter networks, antenna tuning, timing circuits, delay lines, and MRI imaging coils. Benefits * * * * * * * * * * -55C to +125C operating temperature range Ultra high Q Base metal electrode (BME) dielectric system Pb-Free and RoHS Compliant 0201, 0402, 0603, and 0805 case sizes (inches) DC voltage ratings of 6.3 V, 10 V, 25 V, 50 V, 100 V, 250 V and 500 V Capacitance offerings ranging from 0.1 pF up to 100 pF Available capacitance tolerances of 0.05 pF, 0.1 pF, 0.25 pF, 0.5 pF, 1%, 2%, 5%, and 10% No piezoelectric noise Low ESR * * * * * * High thermal stability No capacitance change with respect to applied rated DC voltage Negligible capacitance change with respect to temperature No capacitance decay with time Non-polar device, minimizing installation concerns 100% pure matte tin-plated termination finish allowing for excellent solderability Ordering Information CBR 02 C 330 F 9 G Series Case Size (L"x W") Specification/ Series Capacitance Code (pF) Capacitance Tolerance Voltage Dielectric 02 = 0201 04 = 0402 06 = 0603 08 = 0805 C= Standard 2 significant digits + number of zeros Use 9 for 1.0 - 9.9 pF Use 8 for 0.1 - .99 pF e.g., 2.2 pF = 229 e.g., 0.5 pF = 508 A = 0.05 pF B = 0.1 pF C = 0.25 pF D = 0.5 pF F = 1% G = 2% J = 5% 9 = 6.3 V 8 = 10 V 3 = 25 V 5 = 50 V 1 = 100 V A = 250 V C = 500 V G = C0G CBR A C Packaging/Grade Termination Termination Finish Style (C-Spec)1 A = N/A C = 100% Matte Sn Blank = 7" Reel Unmarked When ordering CBR series devices, a "suffix" or "C-Spec" is not required to indicate a 7" reel packaging option. CBR devices are only available and shipped on 7" reels (paper tape). Bulk bag and cassette packaging options are not available. Please contact KEMET if you have a specific, non-standard packaging requirement. 1 One world. One KEMET (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com C1030_C0G_CBR * 8/13/2013 1 Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications CBR Series, C0G Dielectric, Ultra High Q, Low ESR, 6.3 - 500 VDC (RF & Microwave) Dimensions - Millimeters (Inches) 100% Tin or SnPb Plate L W T Nickel Plate Case Case Size (in.) Size (mm) 0201 0603 0402 1005 0603 1608 0805 2012 L Length 0.60 0.03 (0.024 0.001) 1.00 0.05 (0.040 0.002) 1.60 0.10 (0.063 0.004) 2.00 0.20 (0.079 0.008) Electrodes Conductive Metalization W Width T Thickness B Bandwidth 0.30 0.03 (0.012 0.001) 0.50 0.05 (0.020 0.002) 0.80 0.10 (0.031 0.004) 1.25 0.20 (0.049 0.008) 0.30 0.03 (0.012 0.001) 0.50 0.05 (0.020 0.002) 0.80 0.07 (0.031 0.003) 0.85 0.10 (0.031 0.004) 0.15 0.05 (0.006 0.002) 0.25 + 0.05 / -0.10 (0.010 + 0.002 / -0.004) 0.40 0.15 (0.016 0.006) 0.50 0.20 (0.020 0.008) Mounting Technique Solder Reflow Only Solder Wave or Solder Reflow Applications Ceramic Surface Mount Typical applications include critical timing, tuning, bypass, coupling, feedback, filtering, impedance matching and DC blocking. Field applications include wireless and cellular base stations, wireless LAN, subscriber-based wireless services, wireless broadcast equipment, satellite communications, RF power amplifier (PA) modules, filters, voltage-controlled oscillators (VCOs), PAs, matching networks, RF modules, and medical electronics. Qualification RF and microwave products are subject to internal qualification. Details regarding test methods and conditions are referenced in Table 4, Performance & Reliability. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com C1030_C0G_CBR * 8/13/2013 2 Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications CBR Series, C0G Dielectric, Ultra High Q, Low ESR, 6.3 - 500 VDC (RF & Microwave) Electrical Parameters/Characteristics Item Parameters/Characteristics Operating Temperature Range Capacitance Change with Reference to +25C and 0 VDC Applied (TCC) Aging Rate (Maximum % Capacitance Loss/Decade Hour) Dielectric Withstanding Voltage (DWV) Quality Factor (Q) Insulation Resistance (IR) Limit @ 25C -55C to +125C 0 30 ppm/C (0 60 ppm/C for 0201 case size product 22 pF) 0% See Dielectric Withstanding Voltage Table (5 1 seconds and charge/discharge not exceeding 50 mA) 1,000 for capacitance values 30 pF 400 +20C for capacitance values < 30 pF 10G minimum (rated voltage applied for 120 5 seconds) Capacitance and Quality Factor (Q) measured at 25C and 30 - 70% relative humidity under the following conditions: 1 MHz 100 kHz and 1.0 0.2 Vrms if capacitance 1,000 pF 1 kHz 100 Hz and 1.0 0.2 Vrms if capacitance > 1,000 pF Note: When measuring capacitance it is important to ensure the set voltage level is held constant. The HP4284 & Agilent E4980 have a feature known as Automatic Level Control (ALC). The ALC feature should be switched to "ON." Dielectric Withstanding Voltage Table Rated Voltage (VDC) 100 V 250 V 500 V DWV 250% 200% 150% Environmental Compliance Pb-Free and RoHS Compliant. Electrical Characteristics SRF (GHz) vs. Cap (pF) 100,000 0201 SRF (GHz) 0402 0603 10,000 0805 1,000 100 0.1 1 Cap (pF) 10 100 (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com C1030_C0G_CBR * 8/13/2013 3 Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications CBR Series, C0G Dielectric, Ultra High Q, Low ESR, 6.3 - 500 VDC (RF & Microwave) Electrical Characteristics cont'd Q vs. Frequency 0402 ESR vs. Frequency 0402 10,000 1 4.7pF 4.7pF 10pF 0.1 18pF Q ESR (Ohms) 1.8pF 1,000 1.8pF 10pF 100 18pF 22pF 22pF 10 0.01 100 1,000 Freq (MHz) 1 10,000 100 ESR vs. Frequency 0603 10,000 Q vs. Frequency 0603 10,000 1 2.2pF 2.2pF 1,000 4.7pF 4.7pF 10pF 0.1 10pF Q ESR (Ohms) 1,000 Freq (MHz) 20pF 20pF 100 47pF 47pF 10 0.01 100 1,000 Freq (MHz) 1 100 10,000 ESR vs. Frequency 0805 10,000 2.2pF 1,000 2.2pF 10pF 10pF 33pF 33pF Q 0.1 47pF 100 100pF 47pF 100pF 0.01 100 10,000 Q vs. Frequency 0805 1 ESR (Ohms) 1,000 Freq (MHz) 1,000 Freq (MHz) 10,000 10 1 100 (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com 1,000 Freq (MHz) 10,000 C1030_C0G_CBR * 8/13/2013 4 Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications CBR Series, C0G Dielectric, Ultra High Q, Low ESR, 6.3 - 500 VDC (RF & Microwave) Table 1 - CBR Series, Capacitance Range Waterfall Case Size - Inches (mm) Length Width Thickness Bandwidth mm (Inches) mm (Inches) mm (Inches) mm (Inches) 0201 (0603) 0402 (1005) 0603 (1608) 0805 (2012) 0.60 0.03 (0.024 0.001) 0.30 0.03 (0.012 0.001) 0.30 0.03 (0.012 0.001) 0.15 0.05 (0.006 0.002) 1.00 0.05 (0.040 0.002) 0.50 0.05 (0.020 0.002) 0.50 0.05 (0.020 0.002) 0.25 + 0.05 / -0.10 (0.010 + 0.002 / -0.004) 1.60 0.10 (0.063 0.004) 0.80 0.10 (0.031 0.004) 0.80 0.07 (0.031 0.003) 0.40 0.15 (0.016 0.006) 2.00 0.20 (0.079 0.008) 1.25 0.20 (0.049 0.008) 0.85 0.10 (0.031 0.004) 0.50 0.20 (0.020 0.008) Rated Voltage (VDC) 6.3 10 25 50 25 50 100 50 Voltage Code 9 8 3 5 3 5 1 5 108 208 308 408 508 608 708 808 908 109 119 129 139 149 159 169 179 189 199 209 219 229 239 249 259 269 279 289 299 309 319 329 339 349 359 369 379 389 399 409 419 429 439 449 459 469 479 489 499 509 108 208 308 408 508 608 708 808 908 109 119 129 139 149 159 169 179 189 199 209 219 229 239 249 259 269 279 289 299 309 319 329 339 349 359 369 379 389 399 409 419 429 439 449 459 469 479 489 499 509 108 208 308 408 508 608 708 808 908 109 119 129 139 149 159 169 179 189 199 209 219 229 239 249 259 269 279 289 299 309 319 329 339 349 359 369 379 389 399 409 419 429 439 449 459 469 479 489 499 509 108 208 308 408 508 608 708 808 908 109 119 129 139 149 159 169 179 189 199 209 219 229 239 249 259 269 279 289 299 309 319 329 339 349 359 369 379 389 399 409 419 429 439 449 459 469 479 489 499 509 108 208 308 408 508 608 708 808 908 109 119 129 139 149 159 169 179 189 199 209 219 229 239 249 259 269 279 289 299 309 319 329 339 349 359 369 379 389 399 409 419 429 439 449 459 469 479 489 499 509 108 208 308 408 508 608 708 808 908 109 119 129 139 149 159 169 179 189 199 209 219 229 239 249 259 269 279 289 299 309 319 329 339 349 359 369 379 389 399 409 419 429 439 449 459 469 479 489 499 509 108 208 308 408 508 608 708 808 908 109 119 129 139 149 159 169 179 189 199 209 219 229 239 249 259 269 279 289 299 309 319 329 339 349 359 369 379 389 399 409 419 429 439 449 459 469 479 489 499 509 308 408 508 608 708 808 908 109 119 129 139 149 159 169 179 189 199 209 219 229 239 249 259 269 279 289 299 309 319 329 339 349 359 369 379 389 399 409 419 429 439 449 459 469 479 489 499 509 308 408 508 608 708 808 908 109 119 129 139 149 159 169 179 189 199 209 219 229 239 249 259 269 279 289 299 309 319 329 339 349 359 369 379 389 399 409 419 429 439 449 459 469 479 489 499 509 Rated Voltage (VDC) 6.3 10 25 50 25 50 100 50 Voltage Code 9 8 3 5 3 5 1 5 Capacitance Capacitance Tolerance 0.1 pF 0.2 pF 0.3 pF 0.4 pF 0.5 pF 0.6 pF 0.7 pF 0.8 pF 0.9 pF 1.0 pF 1.1 pF 1.2 pF 1.3 pF 1.4 pF 1.5 pF 1.6 pF 1.7 pF 1.8 pF 1.9 pF 2.0 pF 2.1 pF 2.2 pF 2.3 pF 2.4 pF 2.5 pF 2.6 pF 2.7 pF 2.8 pF 2.9 pF 3.0 pF 3.1 pF 3.2 pF 3.3 pF 3.4 pF 3.5 pF 3.6 pF 3.7 pF 3.8 pF 3.9 pF 4.0 pF 4.1 pF 4.2 pF 4.3 pF 4.4 pF 4.5 pF 4.6 pF 4.7 pF 4.8 pF 4.9 pF 5.0 pF B = 0.1 pF A = 0.05 pF B = 0.1 pF A = 0.05 pF B = 0.1 pF C = 0.25 pF 100 250 50 100 250 500 1 A 5 1 A C 308 408 508 608 708 808 908 109 119 129 139 149 159 169 179 189 199 209 219 229 239 249 259 269 279 289 299 309 319 329 339 349 359 369 379 389 399 409 419 429 439 449 459 469 479 489 499 509 308 408 508 608 708 808 908 109 119 129 139 149 159 169 179 189 199 209 219 229 239 249 259 269 279 289 299 309 319 329 339 349 359 369 379 389 399 409 419 429 439 449 459 469 479 489 499 509 308 408 508 608 708 808 908 109 119 129 139 149 159 169 179 189 199 209 219 229 239 249 259 269 279 289 299 309 319 329 339 349 359 369 379 389 399 409 419 429 439 449 459 469 479 489 499 509 308 408 508 608 708 808 908 109 119 129 139 149 159 169 179 189 199 209 219 229 239 249 259 269 279 289 299 309 319 329 339 349 359 369 379 389 399 409 419 429 439 449 459 469 479 489 499 509 308 408 508 608 708 808 908 109 119 129 139 149 159 169 179 189 199 209 219 229 239 249 259 269 279 289 299 309 319 329 339 349 359 369 379 389 399 409 419 429 439 449 459 469 479 489 499 509 100 250 50 100 250 500 1 A 5 1 A C Capacitance Code (Available Capacitance) (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. C1030_C0G_CBR * 8/13/2013 5 Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications CBR Series, C0G Dielectric, Ultra High Q, Low ESR, 6.3 - 500 VDC (RF & Microwave) Table 1 - CBR Series, Capacitance Range Waterfall cont'd Case Size - Inches (mm) Length Width Thickness Bandwidth mm (Inches) mm (Inches) mm (Inches) mm (Inches) 0201 (0603) 0402 (1005) 0603 (1608) 0805 (2012) 0.60 0.03 (0.024 0.001) 0.30 0.03 (0.012 0.001) 0.30 0.03 (0.012 0.001) 0.15 0.05 (0.006 0.002) 1.00 0.05 (0.040 0.002) 0.50 0.05 (0.020 0.002) 0.50 0.05 (0.020 0.002) 0.25 + 0.05 / -0.10 (0.010 + 0.002 / -0.004) 1.60 0.10 (0.063 0.004) 0.80 0.10 (0.031 0.004) 0.80 0.07 (0.031 0.003) 0.40 0.15 (0.016 0.006) 2.00 0.20 (0.079 0.008) 1.25 0.20 (0.049 0.008) 0.85 0.10 (0.031 0.004) 0.50 0.20 (0.020 0.008) Rated Voltage (VDC) 6.3 10 25 50 25 50 100 50 Voltage Code 9 8 3 5 3 5 1 5 519 529 539 549 559 569 579 589 599 609 619 629 639 649 659 669 679 689 699 709 719 729 739 749 759 769 779 789 799 809 819 829 839 849 859 869 879 889 899 909 919 929 939 949 959 969 979 989 999 519 529 539 549 559 569 579 589 599 609 619 629 639 649 659 669 679 689 699 709 719 729 739 749 759 769 779 789 799 809 819 829 839 849 859 869 879 889 899 909 919 929 939 949 959 969 979 989 999 519 529 539 549 559 569 579 589 599 609 619 629 639 649 659 669 679 689 699 709 719 729 739 749 759 769 779 789 799 809 819 829 839 849 859 869 879 889 899 909 919 929 939 949 959 969 979 989 999 519 529 539 549 559 569 579 589 599 609 619 629 639 649 659 669 679 689 699 709 719 729 739 749 759 769 779 789 799 809 819 829 839 849 859 869 879 889 899 909 919 929 939 949 959 969 979 989 999 519 529 539 549 559 569 579 589 599 609 619 629 639 649 659 669 679 689 699 709 719 729 739 749 759 769 779 789 799 809 819 829 839 849 859 869 879 889 899 909 919 929 939 949 959 969 979 989 999 519 529 539 549 559 569 579 589 599 609 619 629 639 649 659 669 679 689 699 709 719 729 739 749 759 769 779 789 799 809 819 829 839 849 859 869 879 889 899 909 919 929 939 949 959 969 979 989 999 519 529 539 549 559 569 579 589 599 609 619 629 639 649 659 669 679 689 699 709 719 729 739 749 759 769 779 789 799 809 819 829 839 849 859 869 879 889 899 909 919 929 939 949 959 969 979 989 999 519 529 539 549 559 569 579 589 599 609 619 629 639 649 659 669 679 689 699 709 719 729 739 749 759 769 779 789 799 809 819 829 839 849 859 869 879 889 899 909 919 929 939 949 959 969 979 989 999 519 529 539 549 559 569 579 589 599 609 619 629 639 649 659 669 679 689 699 709 719 729 739 749 759 769 779 789 799 809 819 829 839 849 859 869 879 889 899 909 919 929 939 949 959 969 979 989 999 Rated Voltage (VDC) 6.3 10 25 50 25 50 100 50 Voltage Code 9 8 3 5 3 5 1 5 Capacitance Capacitance Tolerance 5.1 pF 5.2 pF 5.3 pF 5.4 pF 5.5 pF 5.6 pF 5.7 pF 5.8 pF 5.9 pF 6.0 pF 6.1 pF 6.2 pF 6.3 pF 6.4 pF 6.5 pF 6.6 pF 6.7 pF 6.8 pF 6.9 pF 7.0 pF 7.1 pF 7.2 pF 7.3 pF 7.4 pF 7.5 pF 7.6 pF 7.7 pF 7.8 pF 7.9 pF 8.0 pF 8.1 pF 8.2 pF 8.3 pF 8.4 pF 8.5 pF 8.6 pF 8.7 pF 8.8 pF 8.9 pF 9.0 pF 9.1 pF 9.2 pF 9.3 pF 9.4 pF 9.5 pF 9.6 pF 9.7 pF 9.8 pF 9.9 pF B = 0.1 pF C = 0.25 pF D = 0.5 pF 100 250 50 100 250 500 1 A 5 1 A C 519 529 539 549 559 569 579 589 599 609 619 629 639 649 659 669 679 689 699 709 719 729 739 749 759 769 779 789 799 809 819 829 839 849 859 869 879 889 899 909 919 929 939 949 959 969 979 989 999 519 529 539 549 559 569 579 589 599 609 619 629 639 649 659 669 679 689 699 709 719 729 739 749 759 769 779 789 799 809 819 829 839 849 859 869 879 889 899 909 919 929 939 949 959 969 979 989 999 519 529 539 549 559 569 579 589 599 609 619 629 639 649 659 669 679 689 699 709 719 729 739 749 759 769 779 789 799 809 819 829 839 849 859 869 879 889 899 909 919 929 939 949 959 969 979 989 999 519 529 539 549 559 569 579 589 599 609 619 629 639 649 659 669 679 689 699 709 719 729 739 749 759 769 779 789 799 809 819 829 839 849 859 869 879 889 899 909 919 929 939 949 959 969 979 989 999 519 529 539 549 559 569 579 589 599 609 619 629 639 649 659 669 679 689 699 709 719 729 739 749 759 769 779 789 799 809 819 829 839 849 859 869 879 889 899 909 919 929 939 949 959 969 979 989 999 100 250 50 100 250 500 1 A 5 1 A C Capacitance Code (Available Capacitance) (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. C1030_C0G_CBR * 8/13/2013 6 Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications CBR Series, C0G Dielectric, Ultra High Q, Low ESR, 6.3 - 500 VDC (RF & Microwave) Table 1 - CBR Series, Capacitance Range Waterfall cont'd Case Size - Inches (mm) Length Width Thickness Bandwidth mm (Inches) mm (Inches) mm (Inches) mm (Inches) 0201 (0603) 0402 (1005) 0603 (1608) 0805 (2012) 0.60 0.03 (0.024 0.001) 0.30 0.03 (0.012 0.001) 0.30 0.03 (0.012 0.001) 0.15 0.05 (0.006 0.002) 1.00 0.05 (0.040 0.002) 0.50 0.05 (0.020 0.002) 0.50 0.05 (0.020 0.002) 0.25 + 0.05 / -0.10 (0.010 + 0.002 / -0.004) 1.60 0.10 (0.063 0.004) 0.80 0.10 (0.031 0.004) 0.80 0.07 (0.031 0.003) 0.40 0.15 (0.016 0.006) 2.00 0.20 (0.079 0.008) 1.25 0.20 (0.049 0.008) 0.85 0.10 (0.031 0.004) 0.50 0.20 (0.020 0.008) Rated Voltage (VDC) 6.3 10 25 50 25 50 100 50 Voltage Code 9 8 3 5 3 5 1 5 100 110 120 130 150 160 180 200 220 240 270 300 330 100 110 120 130 150 160 180 200 220 240 270 300 330 100 110 120 130 150 160 180 200 220 240 270 300 330 100 110 120 130 150 160 180 200 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 820 910 101 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 Rated Voltage (VDC) 6.3 10 25 50 25 50 100 50 Voltage Code 9 8 3 5 3 5 1 5 Capacitance Capacitance Tolerance 10 pF 11 pF 12 pF 13 pF 15 pF 16 pF 18 pF 20 pF 22 pF 24 pF 27 pF 30 pF 33 pF 36 pF 39 pF 43 pF 47 pF 51 pF 56 pF 62 pF 68 pF 75 pF 82 pF 91 pF 100 pF F = 1% G = 2% J = 5% 100 250 50 100 250 500 1 A 5 1 A C 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 820 910 101 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 820 910 101 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 820 910 101 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 620 680 100 250 50 100 250 500 1 A 5 1 A C Capacitance Code (Available Capacitance) (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. C1030_C0G_CBR * 8/13/2013 7 Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications CBR Series, C0G Dielectric, Ultra High Q, Low ESR, 6.3 - 500 VDC (RF & Microwave) Table 2 - Chip Thickness/Reeling Quantities Chip Size Inches (mm) Chip Thickness (mm) 0201 (0603) 0.30 0.03 15,000 0402 (1005) 0.50 0.05 10,000 0603 (1608) 0.80 0.07 4,000 0805 (2012) 0.85 0.10 4,000 Reel Quantity 7" Paper 13" Paper Contact KEMET for availability. Table 3 - Chip Capacitor Land Pattern Design Recommendations per IPC-7351 (mm) Case Size (Inches) Case Size (mm) 0201 Density Level A: Maximum (Most) Land Protrusion Density Level B: Median (Nominal) Land Protrusion Density Level C: Minimum (Least) Land Protrusion C Y X V1 V2 C Y X V1 V2 C Y X V1 V2 0603 0.38 0.56 0.52 1.80 1.00 0.33 0.46 0.42 1.50 0.80 0.28 0.36 0.32 1.20 0.60 0402 1005 0.50 0.72 0.72 2.20 1.20 0.45 0.62 0.62 1.90 1.00 0.40 0.52 0.52 1.60 0.80 0603 1608 0.90 1.15 1.10 4.00 2.10 0.80 0.95 1.00 3.10 1.50 0.60 0.75 0.90 2.40 1.20 0805 2012 1.00 1.35 1.55 4.40 2.60 0.90 1.15 1.45 3.50 2.00 0.75 0.95 1.35 2.80 1.70 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. KEMET only recommends wave soldering of 0603(1608) and 0805 (2012) case sizes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC Standard 7351 (IPC-7351). (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com C1030_C0G_CBR * 8/13/2013 8 Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications CBR Series, C0G Dielectric, Ultra High Q, Low ESR, 6.3 - 500 VDC (RF & Microwave) Soldering Process Recommended Soldering Technique: * Solder wave or solder reflow for 0603 and 0805 case sizes * 0201 and 0402 case sizes are limited to solder reflow only Recommended Soldering Profile: * KEMET recommends following the guidelines outlined in IPC/JEDEC J-STD-020 Recommended Solder Alloys: Alloy Composition Solidus Liquidous In50 In52 Sn62 50 In, 50 Pb 52 In, 48 Sn 62.5 Sn, 36.1 Pb, 1.4 Ag 180C 118C 179C 209C 118C 179C Sn63 Pb-Free Hi-Temp Sn5 63 Sn, 37 Pb 95.5 Sn, 3.8 Ag, 0.7 Cu 5 Sn, 93.5 Pb, 1.5 Ag 5 Sn, 95 Pb 183C 217C 296C 308C 183C 217C 301C 312C (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com C1030_C0G_CBR * 8/13/2013 9 Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications CBR Series, C0G Dielectric, Ultra High Q, Low ESR, 6.3 - 500 VDC (RF & Microwave) Table 4 - Performance & Reliability: Test Methods & Conditions Stress Terminal Strength Vibration Resistance Solderability Board Flex Resistance to Soldering Heat Test or Inspection Method Pressurizing force: 0201 case size: 2N 0402 & 0603 case sizes: 5N 0805 case size: 10N Test time: 10 1 second Vibration frequency: 10 ~ 55 Hz/minimum Total amplitude: 1.5 mm Test time: 6 hours (Two hours each in three mutually perpendicular directions.) Solder temperature: 235 5C Dipping time: 2 0.5 seconds Capacitor is mounted to a substrate which is flexed by means of ram at a rate of 1 mm per second until the deflection becomes 1 mm. (Deflection is maintained for 5 1 second) Store at room temperature for 24 2 hours before measuring electrical properties. Solder temperature: 260 5C Dipping time: 10 1 second Preheating: 120 to 150C for 1 minute before immerse the capacitor in a eutectic solder. Store at room temperature for 24 2 hours before measuring electrical properties. Requirements No visible damage or separation of termination system. No visible damage. Cap change and Q/DF: To meet initial specification 95% minimum coverage of termination finish. No visible damage. Capacitance change: within 5.0% or 0.5 pF, whichever is larger. (Capacitance change is monitored during flexure.) No visible damage. Capacitance change: within 2.5% or 0.25 pF, whichever is larger. Q/DF, IR and dielectric strength: To meet initial requirements. 25% maximum leaching on each edge. 5 cycles of steps 1 - 4: Step Temperature Cycling Humidity (Damp Heat) Steady State Humidity (Damp Heat) Load High Temperature Life Temp. (C) Time (min.) 1 Minimum operating temp. +0/-3 30 3 2 Room temp 2~3 3 Maximum operating temp. +3/-0 30 3 4 Room temp (25C) 2~3 Store at room temperature for 24 2 hours before measuring electrical properties. Test temperature: 40 2C Humidity: 90 ~ 95% RH Test time: 500 +24/-0 hours Store at room temperature for 24 2 hours before measuring electrical properties. Test temperature: 40 2C Humidity: 90 ~ 95% RH Test time: 500 +24/-0 hours Applied voltage: rated voltage Store at room temperature for 24 2 hours before measuring electrical properties. Test temperature: 125 3C Applied voltage: 200% of rated voltage (6.3 VDC - 250 VDC) 150% of rated voltage (500 VDC) Test time: 1,000 +24/-0 hours Store at room temperature for 24 2 hours before measuring electrical properties. No visible damage. Capacitance change: within 2.5% or 0.25 pF, whichever is larger. Q/DF, IR and dielectric strength: To meet initial requirements. No visible damage. Capacitance change: within 5.0% or 0.5 pF, whichever is larger. Q/DF value: Capacitance 30 pF, Q 350, 10 pF Capacitance < 30 pF, Q 275 +2.5C Capacitance < 10 pF; Q 200 +10C IR: 1G No visible damage. Capacitance change: within 7.5% or 0.75 pF, whichever is larger. Q/DF value: Capacitance 30 pF, Q 200, Capacitance < 30 pF, Q 100+10/3C IR: 500M No visible damage. Capacitance change: within 3.0% or 0.3 pF, whichever is larger. Q/DF value: Capacitance 30 pF, Q 350, 10 pF Capacitance < 30 pF, Q 275 +2.5C Capacitance <10 pF, Q 200 +10C IR: 1 G (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com C1030_C0G_CBR * 8/13/2013 10 Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications CBR Series, C0G Dielectric, Ultra High Q, Low ESR, 6.3 - 500 VDC (RF & Microwave) Storage and Handling Ceramic chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature- reels may soften or warp and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40C and maximum storage humidity not exceed 70% relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulfur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within 1.5 years of receipt. Construction Reference A B C D E Item Finish Barrier Layer Base Metal Inner Electrode Dielectric Material Termination System Material 100% Matte Sn Ni Cu Cu BaTiO3 Based Note: Image is exaggerated in order to clearly identify all components of construction Marking CBR series devices are supplied unmarked. If you require marked product, please contact KEMET for availability of a laser-marked option. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com C1030_C0G_CBR * 8/13/2013 11 Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications CBR Series, C0G Dielectric, Ultra High Q, Low ESR, 6.3 - 500 VDC (RF & Microwave) Tape & Reel Packaging Information KEMET offers RF and Microwave Multilayer Ceramic Chip Capacitors packaged in 8 mm tape on 7" reels. This packaging system is compatible with all tape-fed automatic pick and place systems. Bar Code Label Anti-Static Reel (R) ET KEM Punched Paper Carrier Sprocket Holes Punched Cavity 8 mm Carrier Tape 178 mm (7.00") Anti-Static Cover Tape (0.10mm (0.004") Maximum Thickness) Table 5 - Carrier Tape Configuration (mm) EIA Case Size Tape Size (W)* Lead Space (P1)* 0201 - 0402 8 2 0603 - 1210 8 4 *Refer to Figure 1 for W and P1 carrier tape reference locations. *Refer to Table 6 for tolerance specifications. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com C1030_C0G_CBR * 8/13/2013 12 Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications CBR Series, C0G Dielectric, Ultra High Q, Low ESR, 6.3 - 500 VDC (RF & Microwave) Figure 1 - Punched (Paper) Carrier Tape Dimensions P0 T E P2 A0 D0 F W B0 P1 Table 6 - Punched (Paper) Carrier Tape Dimensions Metric will govern Constant Dimensions -- Millimeters (Inches) Tape Size D0 E1 P0 P2 8 mm 1.55 +0.05 (0.061 +0.002) 1.55 0.05 (0.061 0.002) 4.0 0.10 (0.157 0.004) 2.0 0.05 (0.079 0.002) R Reference Note 2 25.0 (0.984) Variable Dimensions -- Millimeters (Inches) Tape Size 8 mm Pitch F P1 2.0 0.05 (0.079 0.002) Half (2 mm) 3.5 0.05 (0.138 0.002) 8 mm Single (4 mm) 4.0 0.10 (0.157 0.004) T W 0.42 0.05 (0.017 0.002) 0.60 0.05 (0.024 0.002) 0.95 0.05 (0.037 0.002) 0.97 0.05 (0.038 0.002) 0.75 0.05 (0.030 0.002) 8.0 0.10 (0.315 0.004) 2. The tape with or without components shall pass around R without damage (see Figure 3). (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com C1030_C0G_CBR * 8/13/2013 13 Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications CBR Series, C0G Dielectric, Ultra High Q, Low ESR, 6.3 - 500 VDC (RF & Microwave) Packaging Information Performance Notes 1. Cover Tape Break Force: 1.0 Kg minimum. 2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 to 1.0 Newton (10 to 100 gf) 12 and 16 mm 0.1 to 1.3 Newton (10 to 130 gf) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165 to 180 from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 10 mm/minute. 3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA Standards 556 and 624. Figure 2 - Bending Radius Punched Carrier Bending Radius R Figure 3 - Tape Leader & Trailer Dimensions Punched Carrier 8mm END Carrier Tape Round Sprocket Holes Leader Top Cover Tape Trailer 110mm minimum, Top Cover Tape 20mm Min. Components 400mm ~ 560mm Minimum (empty cavities and leader) (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com C1030_C0G_CBR * 8/13/2013 14 Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications CBR Series, C0G Dielectric, Ultra High Q, Low ESR, 6.3 - 500 VDC (RF & Microwave) Figure 4 - Maximum Camber Carrier Tape Round Sprocket Holes 1 mm maximum, either direction Straight Edge 250 mm Figure 5 - Reel Dimensions C A N W1 Table 7 - Reel Dimensions Metric will govern Constant Dimensions -- Millimeters (Inches) Tape Size Reel Size A C 8 mm 7 178 0.10 (7.008 0.004) 13.0 0.20 (0.512 0.008) Variable Dimensions -- Millimeters (Inches) Tape Size N Minimum See Note 2, Table 6 W1 8 mm 50 (1.969) 8.4 +1.5/ -0.0 (0.331 +0.059/ -0.0) (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com C1030_C0G_CBR * 8/13/2013 15 Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications CBR Series, C0G Dielectric, Ultra High Q, Low ESR, 6.3 - 500 VDC (RF & Microwave) KEMET Corporation World Headquarters Europe Asia Southern Europe Paris, France Tel: 33-1-4646-1006 Northeast Asia Hong Kong Tel: 852-2305-1168 Mailing Address: P.O. Box 5928 Greenville, SC 29606 Sasso Marconi, Italy Tel: 39-051-939111 Shenzhen, China Tel: 86-755-2518-1306 www.kemet.com Tel: 864-963-6300 Fax: 864-963-6521 Central Europe Landsberg, Germany Tel: 49-8191-3350800 Corporate Offices Fort Lauderdale, FL Tel: 954-766-2800 Kamen, Germany Tel: 49-2307-438110 North America Northern Europe Bishop's Stortford, United Kingdom Tel: 44-1279-460122 2835 KEMET Way Simpsonville, SC 29681 Southeast Lake Mary, FL Tel: 407-855-8886 Espoo, Finland Tel: 358-9-5406-5000 Northeast Wilmington, MA Tel: 978-658-1663 Beijing, China Tel: 86-10-5829-1711 Shanghai, China Tel: 86-21-6447-0707 Taipei, Taiwan Tel: 886-2-27528585 Southeast Asia Singapore Tel: 65-6586-1900 Penang, Malaysia Tel: 60-4-6430200 Bangalore, India Tel: 91-806-53-76817 Central Novi, MI Tel: 248-994-1030 West Milpitas, CA Tel: 408-433-9950 Mexico Guadalajara, Jalisco Tel: 52-33-3123-2141 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com C1030_C0G_CBR * 8/13/2013 16 Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications CBR Series, C0G Dielectric, Ultra High Q, Low ESR, 6.3 - 500 VDC (RF & Microwave) Other KEMET Resources Tools Resource Location Configure A Part: CapEdge http://capacitoredge.kemet.com SPICE & FIT Software http://www.kemet.com/spice Search Our FAQs: KnowledgeEdge http://www.kemet.com/keask Electrolytic LifeCalculator http://www.kemet.com:8080/elc Product Information Resource Location Products Technical Resources (Including Soldering Techniques) RoHS Statement Quality Documents http://www.kemet.com/products http://www.kemet.com/technicalpapers http://www.kemet.com/rohs http://www.kemet.com/qualitydocuments Product Request Resource Location Sample Request Engineering Kit Request http://www.kemet.com/sample http://www.kemet.com/kits Contact Resource Location Website Contact Us Investor Relations www.kemet.com http://www.kemet.com/contact http://www.kemet.com/ir Call Us 1-877-MyKEMET Twitter http://twitter.com/kemetcapacitors Disclaimer All product specifications, statements, information and data (collectively, the "Information") in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation's ("KEMET") knowledge of typical operating conditions for such applications, but are not intended to constitute - and KEMET specifically disclaims - any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET's products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com C1030_C0G_CBR * 8/13/2013 17 Surface Mount Multilayer Ceramic Capacitors (SMD MLCCs) for High Power Applications CBR Series, C0G Dielectric, Ultra High Q, Low ESR, 6.3 - 500 VDC (RF & Microwave) Digitally signed by Jeannette Calvo DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corp., ou=Marketing Communications, cn=Jeannette Calvo, email=jeannettecalvo@kemet.com Date: 2013.08.13 16:40:36 -04'00' (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com C1030_C0G_CBR * 8/13/2013 18