P6SMB27A - Littelfuse - Datasheet.Live

Revision: December 14, 2011, 14:01

Speciﬁcations are subject to change without notice.

Transient Voltage Suppression Diodes

Surface Mount – 600W > P6SMB series

P6SMB Series

Please refer to http://www.Littelfuse.com/series/P6SMB.html for current information.

Agency Approvals

P6SMB Series

Description

The P6SMB series is designed speciﬁcally to protect

sensitive electronic equipment from voltage transients

induced by lightning and other transient voltage events.

Features

• Halogen-Free

• RoHS compliant

• For surface mounted

applications to optimize

board space

• Low prole package

• Built-in strain relief

• Typical maximum

temperature coefﬁcient

ΔVBR = 0.1% x VBR@25°C x ΔT

• Glass passivated chip

junction

• 600W peak pulse power

capability at 10×1000μs

waveform, repetition rate

(duty cycles):0.01%

• Fast response time:

typically less than 1.0ps

from 0V to BV min

• Excellent clamping

capability

• Low incremental surge

resistance

• Typical IR less than 1µA

above 12V

• High Temperature

soldering guaranteed:

260°C/40 seconds at

terminals

• Plastic package has

Underwriters Laboratory

Flammability 94V-O

• Matte Tin Lead–free

Plated

Applications

TVS devices are ideal for the protection of I/O Interfaces,

VCC bus and other vulnerable circuits used in Telecom,

Computer, Industrial and Consumer electronic applications.

Maximum Ratings and Thermal Characteristics

(TA=25OC unless otherwise noted)

Parameter Symbol Value Unit

Peak Pulse Power Dissipation at

TA=25ºC by 10x1000µs waveform

(Fig.1)(Note 1), (Note 2)

PPPM 600 W

Power Dissipation on innite heat

sink at TA=50OCPM(AV) 5.0 W

Peak Forward Surge Current, 8.3ms

Single Half Sine Wave (Note 3) IFSM 100 A

Maximum Instantaneous Forward

Voltage at 50A for Unidirectional

only (Note 4)

VF3.5V/5.0 V

Operating Junction and Storage

Temperature Range TJ, TSTG -65 to 150 °C

Typical Thermal Resistance Junction

to Lead RuJL 20 °C/W

Typical Thermal Resistance Junction

to Ambient RuJA 10 0 °C/W

Notes:

1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.

2. Mounted on copper pad area of 0.2x0.2” (5.0 x 5.0mm) to each terminal.

3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional

device only,duty cycle=4 per minute maximum.

4. VF<3.5V for VBR _

200V and VF<5.0V for VBR _

201V.

AGENCY AGENCY FILE NUMBER

E230531

P6SMB Series

RoHS

Revision: December 14, 2011, 14:01

Speciﬁcations are subject to change without notice.

Transient Voltage Suppression Diodes

Surface Mount – 600W > P6SMB series

P6SMB Series

Please refer to http://www.Littelfuse.com/series/P6SMB.html for current information.

Electrical Characteristics

Part

Number

(Uni)

Part

Number

(Bi)

Marking Reverse

Stand off

Voltage VR

(Volts)

Breakdown

Voltage VBR

(Volts) @ IT

Test

Current

(mA)

Maximum

Clamping

Voltage VC

@ Ipp

(V)

Maximum

Peak

Pulse

Current Ipp

(A)

Maximum

Reverse

Leakage IR

@ VR

(µA)

Agency

Approval

UNI BI MIN MAX

P6SMB6.8A P6SMB6.8CA 6V8A 6V8C 5.80 6.45 7. 1 4 10 10.5 58.1 1000 X

P6SMB7.5A P6SMB7.5CA 7V5A 7V5C 6.40 7. 1 3 7.88 10 11. 3 54.0 500 X

P6SMB8.2A P6SMB8.2CA 8V2A 8V2C 7.02 7.79 8.61 10 12.1 50.4 200 X

P6SMB9.1A P6SMB9.1CA 9V1A 9V1C 7.78 8.65 9.55 1 13.4 45.5 50 X

P6SMB10A P6SMB10CA 10A 10C 8.55 9.50 10.50 1 14.5 42.1 10 X

P6SMB11A P6SMB11CA 11A 11 C 9.40 10.50 11.60 1 15.6 39.1 5 X

P6SMB12A P6SMB12CA 12A 12C 10.20 11.40 12.60 1 16.7 36.5 5 X

P6SMB13A P6SMB13CA 13A 13C 11. 10 12.40 13.70 118.2 33.5 1 X

P6SMB15A P6SMB15CA 15A 15C 12.80 14.30 15.80 1 21.2 28.8 1 X

P6SMB16A P6SMB16CA 16A 16C 13.60 15.20 16.80 1 22.5 27.1 1 X

P6SMB18A P6SMB18CA 18A 18C 15.30 1 7. 1 0 18.90 1 25.5 24.2 1 X

P6SMB20A P6SMB20CA 20A 20C 1 7. 1 0 19.00 21.00 1 27.7 22.0 1 X

P6SMB22A P6SMB22CA 22A 22C 18.80 20.90 23.10 130.6 19.9 1 X

P6SMB24A P6SMB24CA 24A 24C 20.50 22.80 25.20 1 33.2 18.4 1 X

P6SMB27A P6SMB27CA 27A 27C 23.10 25.70 28.40 137.5 16.3 1 X

P6SMB30A P6SMB30CA 30A 30C 25.60 28.50 31.50 1 41.4 14.7 1 X

P6SMB33A P6SMB33CA 33A 33C 28.20 31.40 34.70 1 45.7 13.3 1 X

P6SMB36A P6SMB36CA 36A 36C 30.80 34.20 37.80 1 49.9 12.2 1 X

P6SMB39A P6SMB39CA 39A 39C 33.30 37.10 41.00 1 53.9 11. 3 1 X

P6SMB43A P6SMB43CA 43A 43C 36.80 40.90 45.20 1 59.3 10.3 1 X

P6SMB47A P6SMB47CA 47A 47C 40.20 44.70 49.40 1 64.8 9.4 1 X

P6SMB51A P6SMB51CA 51A 51C 43.60 48.50 53.60 1 70.1 8.7 1 X

P6SMB56A P6SMB56CA 56A 56C 47.80 53.20 58.80 1 77.0 7. 9 1 X

P6SMB58A P6SMB58CA 58A 58C 52.78 55.10 60.90 1 79.8 7. 7 1 X

P6SMB62A P6SMB62CA 62A 62C 53.00 58.90 65.10 1 85.0 7. 2 1 X

P6SMB68A P6SMB68CA 68A 68C 58.10 64.60 71.40 1 92.0 6.6 1 X

P6SMB75A P6SMB75CA 75A 75C 64.10 71.30 78.80 1103.0 5.9 1 X

P6SMB82A P6SMB82CA 82A 82C 70.10 77.90 86.10 1113.0 5.4 1 X

P6SMB91A P6SMB91CA 91A 91C 77.80 86.50 95.50 1 125.0 4.9 1 X

P6SMB100A P6SMB100CA 100A 100C 85.50 95.00 105.00 1 137.0 4.5 1 X

P6SMB110A P6SMB110CA 110 A 110C 94.00 105.00 116.00 1 152.0 4.0 1 X

P6SMB120A P6SMB120CA 120A 120C 102.00 114.00 126.00 1 165.0 3.7 1 X

P6SMB130A P6SMB130CA 130A 130C 111.0 0 124.00 137.00 1 179.0 3.4 1 X

P6SMB150A P6SMB150CA 150A 150C 128.00 143.00 158.00 1 207.0 2.9 1 X

P6SMB160A P6SMB160CA 160A 160C 136.00 152.00 168.00 1 219.0 2.8 1 X

P6SMB170A P6SMB170CA 170A 170C 145.00 162.00 179.00 1 234.0 2.6 1 X

P6SMB180A P6SMB180CA 180A 180C 154.00 171.00 189.00 1 246.0 2.5 1 X

P6SMB200A P6SMB200CA 200A 200C 171.00 190.00 210.00 1 274.0 2.2 1 X

P6SMB220A P6SMB220CA 220A 220C 185.00 209.00 231.00 1328.0 1. 9 1 X

P6SMB250A P6SMB250CA 250A 250C 214.00 237.00 263.00 1344.0 1. 8 1 X

P6SMB300A P6SMB300CA 300A 300C 256.00 285.00 315.00 1 414.0 1. 5 1 X

P6SMB350A P6SMB350CA 350A 350C 300.00 332.00 368.00 1482.0 1. 3 1 X

P6SMB400A P6SMB400CA 400A 400C 342.00 380.00 420.00 1 548.0 1. 1 1 X

P6SMB440A P6SMB440CA 440A 440C 376.00 418.00 462.00 1 602.0 1. 0 1 X

P6SMB480A P6SMB480CA 480A 480C 408.00 456.00 504.00 1 658.0 0.9 1

P6SMB510A P6SMB510CA 510A 510C 434.00 485.00 535.00 1698.0 0.9 1

P6SMB530A P6SMB530CA 530A 530C 477.00 503.50 556.50 1 725.0 0.8 1

P6SMB540A P6SMB540CA 540A 540C 486.00 513.00 567.00 1 740.0 0.8 1

P6SMB550A P6SMB550CA 550A 550C 495.00 522.50 577.50 1 760.0 0.8 1

For bidirectional type having VR of 10 volts and less, the IR limit is double.

For parts without A, the VBR is ± 10%

Revision: December 14, 2011, 14:01

Speciﬁcations are subject to change without notice.

Transient Voltage Suppression Diodes

Surface Mount – 600W > P6SMB series

P6SMB Series

Please refer to http://www.Littelfuse.com/series/P6SMB.html for current information.

0.1

100

0.0010.010.1 1

PPM

-Peak Pulse Power (KW)

0.31x0.31" (8.0x8.0mm)

Copper Pad Area

-Pulse Width (ms)

IPPM- Peak Pulse Current, % IRSM

100

150

1.0 2.0 3.0 4.0

tr=10µsec

Peak Value

IPPM

TJ=25°C

Pulse Width(td) is deﬁned

as the point where the peak

current decays to 50% of IPPM

10/1000µsec. Waveform

as deﬁned by R.E.A

t-Time (ms)

Half Value

IPPM ( )

100

1000

10000

1.010.0100.0 1000.0

Cj (pF)

Tj=25C

f=1.0MHz

Vsig=50mVp-p

Uni-directional V=0V

Bi-directional V=0V

Uni-directional @VR

Bi-directional @V R

VBR - Reverse Breakdown Voltage (V)

0255075100 125150 175

PM(AV), Steady State Power Dissipation (W)

TA - Ambient Te mperature (ºC)

Figure 1 - Peak Pulse Power Rating Figure 2 - Peak Pulse Power or Current Derating Curve

vs Initial Junction Temperature

Figure 3 - Pulse Waveform Figure 4 - Typical Junction Capacitance

Figure 5 - Steady State Power Dissipation Derating

Curve

100

120

110100

Number of Cycles at 60 Hz

IFSM - Peak Forward Surge Current (A)

Figure 6 - Maximum Non-Repetitive Peak Forward

Surge Current Uni-Directional Only

100

0255075100 125 150 175

Peak Pulse Power (P

) or Current

) Derating in Percentage %

- initial temperature (ºC)

Peak Pluse Power

(Single Pluse)

Average Power

Ratings and Characteristic Curves (TA=25°C unless otherwise noted)

Revision: December 14, 2011, 14:01

Speciﬁcations are subject to change without notice.

Transient Voltage Suppression Diodes

Surface Mount – 600W > P6SMB series

P6SMB Series

Please refer to http://www.Littelfuse.com/series/P6SMB.html for current information.

Physical Speciﬁcations

Weight 0.003 ounce, 0.093 grams

Case JEDEC DO214AA. Molded plastic body

over glass passivated junction

Polarity Color band denotes cathode except

Bidirectional.

Terminal Matte Tin-plated leads, Solderable per

JESD22-B102D

Environmental Speciﬁcations

Temperature Cycle JESD22-A104

Pressure Cooker JESD 22-A102

High Temp. Storage JESD22-A103

HTRB JESD22-A108

Thermal Shock JESD22-A106

Soldering Parameters

Temperature (T)

Time (t)

Ts(min)

Ts(max)

Preheat

Ramp-up Critical Zone

TL to TP

Ramp-down

t 25˚C to Peak

25˚C

Reﬂow Condition Lead–free assembly

Pre Heat

- Temperature Min (Ts(min))150°C

- Temperature Max (Ts(max))200°C

- Time (min to max) (ts)60 – 180 secs

Average ramp up rate (Liquidus Temp

(TL) to peak 3°C/second max

TS(max) to TL - Ramp-up Rate 3°C/second max

Reﬂow - Temperature (TL) (Liquidus) 217°C

- Time (min to max) (ts)60 – 150 seconds

Peak Temperature (TP)260+0/-5 °C

Time within 5°C of actual peak

Temperature (tp)20 – 40 seconds

Ramp-down Rate 6°C/second max

Time 25°C to peak Temperature (TP)8 minutes Max.

Do not exceed 280°C

Dimensions

Cathode Band

Dimension in inches and (millimeters)

DO-214AA (SMB J-Bend)

Dimensions Inches Millimeters

Min Max Min Max

A 0.077 0.086 1.950 2.200

B 0.160 0.180 4.060 4.570

C0.130 0.155 3.300 3.940

D 0.084 0.096 2.130 2.440

E 0.030 0.060 0.760 1.520

F - 0.008 - 0.203

G0.205 0.220 5.210 5.590

H0.006 0.016 0.152 0.405

I 0.089 - 2.260 -

J 0.085 - 2.160 -

K-0.107 -2.740

L 0.085 - 2.160 -

(all dimensions in mm)

Solder Pads

Revision: December 14, 2011, 14:01

Speciﬁcations are subject to change without notice.

Transient Voltage Suppression Diodes

Surface Mount – 600W > P6SMB series

P6SMB Series

Please refer to http://www.Littelfuse.com/series/P6SMB.html for current information.

Part Numbering System

VOLTAGE

BI-DIRECTIONAL

5% VOLTA GE TOLERANCE

SERIES

P6SMB XXX CA

Part Marking System

XXXX

Marking Code

Littelfuse Logo

Cathode Band

XXXXX

Trace Code Marking

Packaging

Part number Component

Package Quantity Packaging

Option

Packaging

Speciﬁcation

P6SMBxxxXX DO-214AA 3000 Tape & Reel – 12mm/13” tape EIA STD RS-481

Tape and Reel Speciﬁcation

0.47

(12.0)

0.315

(8.0)

0.157

(4.0)

0.49

(12.5)

0.80 (20.2)

Arbor Hole Dia.

13.0 (330)

Dimensions are in inches

(and millimeters).

Direction of Feed

0.059 DIA

(1.5) Cover tape

Cathode