DDTC143EKA-7-F - Diodes Incorporated

DDTC (R1 = R2 SERIES) KA

NPN PRE-BIASED SMALL SIGNAL SURFACE MOUNT TRANSISTOR

Features

• Epitaxial Planar Die Construction

• Complementary PNP Types Available (DDTA)

• Built-In Biasing Resistors, R1 = R2

• Lead Free/RoHS Compliant (Note 2)

• "Green" Device, Note 3 and 4

Mechanical Data

• Case: SC-59

• Case Material: Molded Plastic, "Green" Molding

Compound, Note 4. UL Flammability Classification

Rating 94V-0

• Moisture Sensitivity: Level 1 per J-STD-020C

• Terminals: Solderable per MIL-STD-202, Method 208

• Lead Free Plating (Matte Tin Finish annealed over

Copper leadframe).

• Terminal Connections: See Diagram

• Marking Information: See Table Below & Page 4)

• Ordering Information: See Page 4

• Weight: 0.008 grams (approximate)

P/N R1, R2 (NOM) Type Code

DDTC123EKA

DDTC143EKA

DDTC114EKA

DDTC124EKA

DDTC144EKA

DDTC115EKA

2.2KΩ

4.7KΩ

10KΩ

22KΩ

47KΩ

100KΩ

N04

N08

N13

N17

N20

N24

SC-59

Dim Min Max

A 0.35 0.50

B 1.50 1.70

C 2.70 3.00

D 0.95

G 1.90

H 2.90 3.10

J 0.013 0.10

K 1.00 1.30

L 0.35 0.55

M 0.10 0.20

α 0° 8°

All Dimensions in mm

DS30337 Rev. 8 - 2

1 of 4

www.diodes.com

DDTC (R1 = R2 SERIES) KA

Maximum Ratings @TA = 25°C unless otherwise specified

Characteristic Symbol Value Unit

Supply Voltage, (3) to (2) VCC 50 V

Input Voltage, (1) to (2) DDTC123EKA

DDTC143EKA

DDTC114EKA

DDTC124EKA

DDTC144EKA

DDTC115EKA

VIN

-10 to +12

-10 to +30

-10 to +40

Output Current DDTC123EKA

DDTC143EKA

DDTC114EKA

DDTC124EKA

DDTC144EKA

DDTC115EKA

100

Output Current All IC (Max) 100 mA

Power Dissipation Pd200 mW

Thermal Resistance, Junction to Ambient Air (Note 1) RθJA 625 °C/W

Operating and Storage Temperature Range Tj, TSTG -55 to +150 °C

Notes: 1. Mounted on FR4 PC Board with recommended pad layout at http://www.diodes.com/datasheets/ap02001.pdf.

2. No purposefully added lead.

3. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php.

4. Product manufactured with Date Code 0627 (week 27, 2006) and newer are built with Green Molding Compound. Product manufactured prior to

Date Code 0627 are built with Non-Green Molding Compound and may contain Halogens or Sb2O3 Fire Retardants.

OUT

IN GND(0)

1 3

GND (0)

IN OUT

Schematic and Pin Configuration Equivalent Inverter Circuit

DS30337 Rev. 8 - 2

2 of 4

www.diodes.com

DDTC (R1 = R2 SERIES) KA

Electrical Characteristics @TA = 25°C unless otherwise specified

Characteristic Symbol Min Typ Max Unit Test Condition

Vl(off) 0.5 1.1 ⎯ VCC = 5V, IO = 100μA

Input Voltage Vl(on) ⎯ 1.9 3 V

VO = 0.3V, IO = 20mA, DDTC123EKA

VO = 0.3V, IO = 20mA, DDTC143EKA

VO = 0.3V, IO = 10mA, DDTC114EKA

VO = 0.3V, IO = 5mA, DDTC124EKA

VO = 0.3V, IO = 2mA, DDTC144EKA

VO = 0.3V, IO = 1mA, DDTC115EKA

Output Voltage VO(on) ⎯ 0.1 0.3 V

IO/Il =10mA/0.5mA, DDTC123EKA

IO/Il =10mA/0.5mA, DDTC143EKA

IO/Il =10mA/0.5mA, DDTC114EKA

IO/Il =10mA/0.5mA, DDTC124EKA

IO/Il =10mA/0.5mA, DDTC144EKA

IO/Il =5mA/0.25mA, DDTC115EKA

Input Current

DDTC123EKA

DDTC143EKA

DDTC114EKA

DDTC124EKA

DDTC144EKA

DDTC115EKA

Il⎯ ⎯

3.8

1.8

0.88

0.36

0.18

0.15

mA VI = 5V

Output Current IO(off) ⎯ ⎯ 0.5 μA VCC = 50V, VI = 0V

DC Current Gain

DDTC123EKA

DDTC143EKA

DDTC114EKA

DDTC124EKA

DDTC144EKA

DDTC115EKA

⎯ ⎯ ⎯

VO = 5V, IO = 20mA

VO = 5V, IO = 10mA

VO = 5V, IO = 5mA

Input Resistor (R1) Tolerance ΔR1-30 ⎯ +30 % ⎯

Resistance Ratio R2/R10.8 1 1.2 ⎯ ⎯

Gain-Bandwidth Product* fT⎯ 250 ⎯ MHz VCE = 10V, IE = 5mA,

f = 100MHz

* Transistor - F o r Refere nce Only

Typical Curves – DDTC143EKA

-50 050100

250

200

150

100

T , AMBIENT TEMPERA TURE ( C)

Fig. 1 Derating Curve

150

DISSI

N (mW)

0.001

0.01

0.1

010 20 30 40 50

LLE

EMI

E (V)

CE(SAT)

I , COLLECTOR CURRENT (mA)

Fig. 2 V vs. I

CE(SAT) C

I/I = 10

-25 C

75 C

25 C

1,000

100

1110

h, D

100

AIN

I , COLLECTOR CURRENT (mA)

Fig. 3 DC Current Gain

V = 10V

75 C

020 30

E (p

)

V , REVERSE BIAS VOL TAGE (V)

Fig. 4 Output Capacitance

515 25

f = 1MHz

0.01

0.1

100

01234 89

LLE

(mA)

V , INPUT VOLTAGE (V)

Fig. 5 Collector Current vs. Input Voltage

75 C

-25°C

567

25°C

010203040

I , COLLECTOR CURRENT (mA)

Fig. 6 Input Voltage vs. Collector Current

V , INPUT VOL TAGE (V)

DS30337 Rev. 8 - 2

3 of 4

www.diodes.com

DDTC (R1 = R2 SERIES) KA

Ordering Information (Note 4 & 5)

Device Packaging Shipping

DDTC123EKA-7-F SC-59 3000/Tape & Reel

DDTC143EKA-7-F SC-59 3000/Tape & Reel

DDTC114EKA-7-F SC-59 3000/Tape & Reel

DDTC124EKA-7-F SC-59 3000/Tape & Reel

DDTC144EKA-7-F SC-59 3000/Tape & Reel

DDTC115EKA-7-F SC-59 3000/Tape & Reel

Notes: 5. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.

Marking Information

NXX

NXX = Product Type Marking Code, See Table on Page 1

YM = Date Code Marking

Y = Year ex: T = 2006

M = Month ex: 9 = September

Date Code Key

Year 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012

Code N P R S T U V W X Y Z

Month Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec

Code 1 2 3 4 5 6 7 8 9 O N D

IMPORTANT NOTICE

Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes

without further notice to any product herein. Diodes Incorporated does not assume an y liability arising out of the application or use of any product

described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall

assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website,

harmless against all damages. LIFE SUPPORT

Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written

approval of the President of Diodes Incorporated.

DS30337 Rev. 8 - 2

4 of 4

www.diodes.com

DDTC (R1 = R2 SERIES) KA