SCOPE: CMOS TTL COMPATIBLE ANA LOG SWITCHES
ORDERING INFORMATION
Device Type Generic Number SMD Circuit Function
01 IH5040MJE/883B 8100601EA One Channel, 75Ω SPST s witch
02 IH5041MJE/883B 8100602EA Two Channel, 75Ω Dual SPST
03 IH5042MJE/883B 8100603EA One Channel, 75Ω SPDT
04 IH5043MJE/883B 8100604EA Two Channel, 75Ω Dual SPDT
05 IH5044MJE/883B 8100605EA One Channel, 75Ω DPST
06 IH5045MFD/883B 8100606XC Two Channel, 75Ω Dual DPST
06 IH5045MJE/883B 8100606EA Two Channel, 75Ω Dual DPST
08 IH5047MJE/883B 8100608EA One Channel, 75Ω 4 PST
09 IH5140MJE/883B 8100609EA One Channel, 75Ω SPST switch
10 IH5141MJE/883B 8100610EA Two Channel, 75Ω Dual SPST
11 IH5142MJE/883B 8100611EA One Channel, 75Ω SPDT
12 IH5143MJE/883B 8100612EA Two Channel, 30Ω Dual SPDT
13 IH5144MJE/883B 8100613EA One Channel, 30Ω DPST
14 IH5145MJE/883B 8100614EA Two Channel, 75Ω Dual DPST
16 IH5047MJE/883B 8100616EA One Channel, 75Ω 4 PST
20 IH5149MJE/883B 8100620EA Two Channel, 30Ω DPST
21 IH5150MJE/883B 8100621EA One Channel, 30Ω SPDT
22 IH5151MJE/883B 8100622EA Two Channel, 30Ω Dual SPDT
Case Outline(s). The case outlines shall be designated in Mil-Std-1835 and as follows:
Outline Letter Mil-Std-1835 Case Outline Package Code
Maxim SMD
JE E GDIP1-T16 or CDIP2-T16 16 LEAD CERDIP J16
FD X CDFP3-F14 14 LEAD CERDIP F14
A bs olute Maximum Ratings:
V+ to V- ............................................................................................................................... 33V
V+ to VD .............................................................................................................................. 30V
VD to V- ............................................................................................................................... 30V
VD to VS ............................................................................................................................ ±22V
VL to V- ............................................................................................................................... 33V
VL to VIN ............................................................................................................................. 30V
VL to VR .............................................................................................................................. 20V
VIN to VR ............................................................................................................................. 20V
VR to V- .............................................................................................................................. 33V
VR to VIN ............................................................................................................................... 2V
Continuous Current, Any terminal (except S or D)........................................................... 30mA
Peak Current, S or D (Pulsed at 1ms, 10% duty cycle max) ............................................ 80mA
Lead Temperature (soldering, 10 seconds) ......................................................................... +300°C
Storage Temperature ............................................................................................ -65°C to +150°C
Continuous Power Dissipation ........................................................................……….. TA=+70°C
16 lead CERDIP (derate 10.0mW/°C above +70°C) .............................................……... 800mW
14 lead Flatpack (derate 5.7mW/°C above +70°C) ...............................................……... 457mW
Junct ion Te mperature TJ .....................................................................................…….... +150°C
Thermal Resista nce, J unction to Case, ΘJC:
Case Outline 16 lead CERDIP................................................................……… 50°C/W
Case Outline 14 lead Flatpack ...............................................................…….... 70°C/W
Thermal Resistance, Junction to Ambient, ΘJA:
Case Outline 16 lead CERDIP.............................................................……..... 100°C/W
Case Outline 14 lead Flatpack .............................................................……..... 175°C/W
Recommended Operating Co ndit ions
Ambient Operating Range (TA) ..........................................................………. -55°C to +125°C
Positive Supply Voltage (V+) ...............................................................................………... +15V
Negative Supply Voltage (V-) ..............................................................................………... -15V
VR .........................................................................................................................………..... 0V
VL ..........................................................................................................................………... 5 V
---------------------------- Electrical Characteristics of IH5040-45, 47/883B 19-0340 Rev. C
IH5140-5145, IH5149-5151 for SMD 81006 Page 2 of 7
Stresses beyond those listed under “Ab solute Maximum Ratings” may cause permanent damage to the device.
These are stress ratings only, and functional operation of the device at these or an y other conditions beyond
those indicated in the operational section s of the sp ecifica tions is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
TABLE 1. ELECTRICAL TESTS:
TEST Symbol
CONDITIONS
-55 °C <=TA<= +125°C
V+=+15V, V-=-15V, GND=0V
VAH=2.4V, VAL=0.8V, VL=5V
Unless otherwise specified
Group A
Subgroup Device
type Limits
Min Limits
Max Units
INPUT
Input Current,
Input Voltage
High
IIH VIN=2.4V, 5V 1,3
2All -1
-1 1
10 µA
Input Current,
Input Voltage
Low
IIL VIN=0.0V 1,3
2All -1
-10 1
1µA
SWITCH
Drain-Source ON
Resistance rDS(ON) IS =±10mA, VD=±10V, 1,3
201 - 16 75
150 Ω
Drain-Source ON
Resistance rDS(ON) IS =±10mA, VS=±10V, 1,3
217 - 22 45
50 Ω
Drain-Source ON
Resistance rDS(ON) IS =±10mA, VD=±7.5V, NOTE 2
VCC=±10V 1,3
2All 75
150 Ω
Source- OFF
Leakage Current IS(OFF) VS=±10V, VD=±10V, VIN=3/ 1
2,3 All ±1
±100 nA
Drain- OFF
Leakage Current ID(OFF) VS=±10V, VD=±10V, VIN=3/ 1
2,3 All ±1
±100 nA
Channel-On
Leakage Current ID(ON) VD=VS=±10V, VIN=3/ 1
2,3 All ±2
±200 nA
SUPPLY
Positive Supply
Current I+ VIN=0V, 5V 1,3
201-08 10
100 µA
Positive Supply
Current I+ VIN=0V, 5V 1
2,3 09-22 200
300 µA
Negat ive Supply
Current I- VA=0V, 5V 1,3
201-08 -10
-100 µA
Negat ive Supply
Current I- VIN=0V, 5V 1
2,3 09-22 -200
-300 µA
Logic Supply
Current IL+V
IN=0V, 5V 1,3
201-08 10
100 µA
Logic Supply
Current IL+V
IN=0V, 5V 1
2,3 09-22 -200
-300 µA
Reference Supply
Current I- VA=0V, 5V 1,3
201-08 -10
-100 µA
Reference Supply
Current I- VIN=0V, 5V 1
2,3 09-22 -200
-300 µA
---------------------------- Electrical Characteristics of IH5040-45, 47/883B 19-0340 Rev. C
IH5140-5145, IH5149-5151 for SMD 81006 Page 3 of 7
TEST Symbol
CONDITIONS
-55 °C <=TA<= +125°C
V+=+15V, V-=-15V, GND=0V
VAH=2.4V, VAL=0.8V, VL=5V
Unless otherwise specified
Group A
Subgroup Device
type Limits
Min Limits
Max Units
Turn-On Time tON Figure 1 9
10
11
01-08 450
550
375
ns
Turn-On Time tON Figure 1 9
10
11
09-22 500
800
450
ns
Turn-Off Time tOFF Figure 1 9,11
10 01-08 250
400 ns
Turn-Off Time tOFF Figure 1 9
10
11
09-22 450
600
350
ns
Single channel
Isolation VISO RL=100Ω, f=100kHz, VIN=2Vp-p,
CL=5pF, NOTE 2 9All 60 dB
Crosstalk between
channel VCT RL=100Ω, f=100kHz, VIN=2Vp-p,
CL=5pF, NOTE 2 9All 60 dB
Charge Transfer
Error VCTE VIN=0V, CL=10nF, NOTE 2 9 All 30 mV
Break before Make
Time Delay tDNOTE 2 9 03, 05 5
Driver Input
Capacitance CAVIN=0V, NOTE 2 9 All 45 pF
Switch Input
Capacitance CIS Switch OFF, NOTE 2 9 All 60 pF
Switch Output
Capacitance COS Switch OFF, NOTE 2 9 All 60 pF
NOTE 1: The listed resistance limits correspond to the following voltage values:
45Ω and 75Ω = ±9.25V, ±6.75V
50Ω and 150Ω = ±8.55V, ±6.0V
NOTE 2: Guaranteed if not tested to the limits specified.
NOTE 3: Device Types VIN Channels
ON Channels
OFF
01, 09 2.4V
0.8V 11
02, 10 2.4V
0.8V 1, 2 1, 2
03, 05, 11, 13 2.4V
0.8V 1
22
1
04, 12 2.4V
0.8V 1, 2
3, 4 3, 4
1, 2
21 2.4V
0.8V 2, 3
1, 4 1,4
2,3
06, 08, 14, 16, 20, 22 2.4V
0.8V 1, 2, 3, 4 1, 2, 3, 4
Figure 1. Switching Time: See Commercial Data Sheet.
---------------------------- Electrical Characteristics of IH5040-45, 47/883B 19-0340 Rev. C
IH5140-5145, IH5149-5151 for SMD 81006 Page 4 of 7
TERMINAL CONNECTIONS
TERMINAL
NUMBER 01, 09
IH5040
IH5140
02, 10
IH5041
IH5141
03,11,21
IH5042
IH5142
IH5150
04,12,22
IH5043
IH5143
IH5151
05, 13
IH5044
IH5144
06
IH5045 06,14,20
IH5045
IH5145
IH5149
08,16
IH5047 08,16
IH5047
0 J16 J16 J16 J16 J16 F14 J16 F14 J16
1 D D1 D1 D1 D1 D1 D1 D2 D2
2S3S1
3 D2D3D2D3D3D1D1
4 S2S3S2D4S3D4S1
5 S4 S4S4S4S4
6 D4 D2D4D3D4
7S2S3
8 D2 D2 IN2 D2 D3
9 S2 S2 V+S2V+S3
10 IN2 IN2 VL IN2 VL
11 V+ V+ V+ V+ V+ VR V+ VR V+
12 VL VL VL VL VL V- VL V- VL
13 VR VR VR VR VR IN1 VR IN VR
14 V- V- V- V- V- S1 V- S2 V-
15 IN IN1 IN IN1 IN IN1 IN1
16 S S1 S1 S1 S1 S1 S2
ORDERING INFORMATION
Device Type Generic Number SMD Circuit Function
01 IH5040MJE/883B 8100601EA One Channel, 75 Ω SPST
02 IH5041MJE/883B 8100602EA Two Channel, 75Ω Dual SPST
03 IH5042MJE/883B 8100603EA One Channel, 75Ω SPDT
04 IH5043MJE/883B 8100604EA Two Channel, 75Ω Dual SPDT
05 IH5044MJE/883B 8100605EA One Channel, 75Ω DPST
06 IH5045MFD/883B 8100606XC Two Channel, 75Ω Dual DPST
06 IH5045MJE/883B 8100606EA Two Channel, 75Ω Dual DPST
08 IH5047MJE/883B 8100608EA One Channel, 75 Ω 4 PST
09 IH5140MJE/883B 8100609EA One Channel, 75 Ω SPST switch
10 IH5141MJE/883B 8100610EA Two Channel, 75Ω Dual SPST
11 IH5142MJE/883B 8100611EA One Channel, 75 Ω SPDT
12 IH5143MJE/883B 8100612EA Two Channel, 30Ω Dual SPDT
13 IH5144MJE/883B 8100613EA One Channel, 30 Ω DPST
14 IH5145MJE/883B 8100614EA Two Channel, 75Ω Dual DPST
16 IH5047MJE/883B 8100616EA One Channel, 75 Ω 4 PST
20 IH5149MJE/883B 8100620EA Two Channel, 30Ω DPST
21 IH5150MJE/883B 8100621EA One Channel, 30 Ω SPDT
22 IH5151MJE/883B 8100622EA Two Channel, 30Ω Dual SPDT
---------------------------- Electrical Characteristics of IH5040-45, 47/883B 19-0340 Rev. C
IH5140-5145, IH5149-5151 for SMD 81006 Page 5 of 7
QUALITY ASSURAN CE
Sampling and inspection procedures shall be in accordance with MIL-Prf-38535, Appendix A as specified in Mil-Std-883.
Screening shall be in accordance with Method 5004 of Mil-Std-883. Burn-in test Method 1015:
1. Test Condition, A, B, C, or D.
2. TA = +125°C mini mum.
3. Interim and final electrical test requirements shall be specified in Table 2.
Quality conformance inspection shall be in accordance with Method 5005 of Mil-Std-883, including Groups A, B, C, and D
inspection.
Group A inspection:
1. Tests as specified in Table 2.
2. Selected subgroups in Table 1, Method 5005 of Mil-Std-883 shall be omitted.
Group C and D inspections:
a. End-point electrical parameters shall be specified in Table 1.
b. Steady-state life test, Method 1005 of Mil-Std-883:
1. Test condition A, B, C, D.
2. TA = +125°C, mi nimum.
3. Test duration, 1000 hours, except as permitted by Method 1005 of Mil-Std-883.
TABLE 2. ELECTRICAL TEST RE QUIREMENTS
Mil-Std-883 Test Requirements Subgroups
per Method 5005, Table 1
Interim Electric Parameters
Method 5004 1
Final Electrical Parameters
Method 5005 1*, 2, 3, 9
Group A Test Requirements
Method 5005 1, 2, 3, 9, 10, 11
Group C and D End-Point Electrical Parameters
Method 5005 1
* PDA applies to Subgroup 1 only.
---------------------------- Electrical Characteristics of IH5040-45, 47/883B 19-0340 Rev. C
IH5140-5145, IH5149-5151 for SMD 81006 Page 6 of 7
