DS36276 DS36276 FAILSAFE Multipoint Transceiver Literature Number: SNLS085A DS36276 FAILSAFE Multipoint Transceiver General Description Features The DS36276 FAILSAFE Multipoint Transceiver is designed for use on bi-directional differential busses. It is compatible with existing TIA/EIA-485 transceivers, however, it offers an additional feature not supported by standard transceivers. The FAILSAFE feature guarantees the receiver output to a known state when the Interface is in the following conditions: Floating Line, Idle Line (no active drivers), and Line Fault conditions (open or short). The receiver output is in a HIGH state for the following conditions: OPEN Inputs, Terminated Inputs (50), and SHORTED Inputs. FAILSAFE is a highly desirable feature when the transceivers are used with Asynchronous Controllers such as UARTs. n FAILSAFE receiver, RO = HIGH for: -- OPEN inputs -- Terminated inputs -- SHORTED inputs n Compatible with popular interface standards: -- TIA/EIA-485 (RS-485) -- TIA/EIA-422-A (RS-422-A) -- CCITT Recommendation V.11 n Bi-Directional Transceiver -- Designed for multipoint transmission n Separate driver input, driver enable, receiver enable, and receiver output for maximum flexibility n Wide bus common mode range -- (-7V to +12V) n Pin compatible with: DS75176B, DS96176, DS3695 and SN75176A and B n Available in SOIC package Connection and Logic Diagram Driver Inputs Outputs RE DE DI DO/RI X H H H L X H L L H X L X Z Z DO /RI Receiver Inputs DS011383-1 Order Number DS36276M See NS Package Number M08A RE DE L L H Output RI-RI RO L 0V H L -500 mV L X X Z Receiver FAILSAFE Inputs Output RE DE RI-RI L L SHORTED H L L OPEN H H X X Z RO TRI-STATE (R) is a registered trademark of National Semiconductor Corporation. (c) 2001 National Semiconductor Corporation DS011383 www.national.com DS36276 FAILSAFE Multipoint Transceiver July 1998 DS36276 Absolute Maximum Ratings (Note 1) Lead Temperature (Soldering 4 sec.) Max Junction Temperature ESD Rating (HBM, 1.5 k, 100 pF) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Supply Voltage (VCC) 7V 5.5V Input Voltage (DE, RE , and DI) Driver Output Voltage/ Receiver Input Voltage -10V to +15V Receiver Output Voltage (RO) 5.5V Maximum Package Power Dissipation @ +25C M Package (derate 5.8 mW/C above +25C) 726 mW Storage Temperature Range -65C to +150C 260C 150C 6.0 kV Recommended Operating Conditions Min 4.75 -7 Max 5.25 +12 Units V V 0 +70 C Min Typ Max Units 1.5 4.8 6.0 V Supply Voltage, VCC Bus Voltage Operating Temperature (TA) DS36276 Electrical Characteristics (Notes 2, 4) Over recommended Supply Voltage and Operating Temperature ranges, unless otherwise specified. Symbol Parameter Conditions DRIVER CHARACTERISTICS VOD Differential Output Voltage IO = 0 mA (No Load) VoDO Output Voltage IO = 0 mA (Output to GND) VoDO Output Voltage VT1 Differential Output Voltage (Termination Load) RL = 54 (485) VT1 Balance of VT1 |VT1| - |VT1 | RL = 54 VOS Driver Common Mode Output Voltage RL = 54 VOS Balance of VOS |VOS| - |VOS | RL = 54 Driver Short-Circuit Output Current VO = +12V IOSD 0 6.0 V 0 6.0 V 5.0 V (Figure 1) 1.5 2.0 2.3 5.0 V (Note 3) -0.2 0.07 +0.2 V -0.2 0.07 +0.2 V 0 2.5 3.0 V V RL = 100 (422) RL = 100 (Figure 1) RL = 100 (Note 3) RL = 100 2.0 0 2.3 3.0 -0.2 0.08 +0.2 V -0.2 0.08 +0.2 V 134 290 (Figure 3) VO = VCC 140 mA mA VO = 0V -140 VO = -7V -180 -290 mA -0.18 0 V mA RECEIVER CHARACTERISTICS VTH Differential Input High Threshold Voltage (Note 5) VO = VOH, IO = -0.4 mA -7V VCM +12V VTL Differential Input Low Threshold Voltage (Note 5) VO = VOL, IO = 8.0 mA -7V VCM +12V VHST Hysteresis (Note 6) VCM = 0V IIN Line Input Current (VCC = 4.75V, 5.25V, 0V) Other Input = 0V DE = VIH (Note 7) IOSR Short Circuit Current VO = 0V IOZ TRI-STATE (R) Leakage Current VO = 0.4 to 2.4V VOH Output High Voltage (Figure 12) VID = 0V, IOH = -0.4 mA 2.5 3.5 V VID = OPEN, IOH = -0.4 mA 2.5 3.5 V VOL Output Low Voltage (Figure 12 ) VID = -0.5V, IOL = +8 mA RIN Input Resistance www.national.com -0.5 -0.23 V 50 mV VI = +12V 0.7 1.0 mA VI = -7V -0.5 -0.8 mA -30 -85 mA +20 A RO -5.0 -20 VID = -0.5V, IOL = +16 mA 12 2 0.25 0.6 0.35 0.7 19 V V k DS36276 Electrical Characteristics (Notes 2, 4) (Continued) Over recommended Supply Voltage and Operating Temperature ranges, unless otherwise specified. Symbol Parameter Conditions Min Typ Max Units 2.0 VCC V GND 0.8 V 20 A -100 A DEVICE CHARACTERISTICS VIH High Level Input Voltage DE, RE, or DI VIL Low Level Input Voltage IIH High Level Input Current VIH = 2.4V IIL Low Level Input Current VIL = 0.4V VCL Input Clamp Voltage ICL = -18 mA -0.75 -1.5 V ICC Output Low Voltage Supply Current (No Load) DE = 3V, RE = 0V, DI = 0V 42 60 mA DE = 0V, RE = 0V, DI = 0V 28 45 mA DE = 3V, RE = 3V, DI = 0V 43 60 mA DE = 0V, RE = 3V, DI = 0V 31 50 mA ICCR ICCD ICCX Switching Characteristics (Note 4) Over recommended Supply Voltage and Operating Temperature ranges, unless otherwise specified. Symbol Parameter Conditions Min Typ Max Units 7 21 60 ns 7 19 60 ns DRIVER CHARACTERISTICS tPLHD Diff. Prop. Delay Low to High tPHLD Diff. Prop. Delay High to Low tSKD Diff. Skew (|tPLHD-tPHLD|) tr Diff. Rise Time tf Diff. Fall Time tPLH Prop. Delay Low to High tPHL Prop. Delay High to Low tPZH Enable Time Z to High tPZL Enable Time Z to Low tPHZ Disable Time High to Z tPLZ Disable Time Low to Z RL = 54 CL = 50 pF CD = 50 pF (Figures 4, 5) 2 10 ns 12 50 ns 12 50 ns RL = 27, CL = 15 pF (Figures 6, 7) 22 45 ns 22 45 ns RL = 110 CL = 50 pF (Figure 8 - Figure 11) 32 55 ns 32 65 ns 22 55 ns 16 55 ns 15 40 70 ns 15 42 70 ns 2 15 ns 15 50 ns RECEIVER CHARACTERISTICS tPLH Prop. Delay Low to High tPHL Prop. Delay High to Low tSK Skew (|tPLH-tPHL|) tPZH Enable Time Z to High VID = -1.5V to +1.5V CL = 15 pF (Figures 13, 14) CL = 15 pF (Figures 15, 16) tPZL Enable Time Z to Low 17 50 ns tPHZ Disable Time High to Z 24 50 ns tPLZ Disable Time Low to Z 19 50 ns Note 1: "Absolute Maximum Ratings"are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices should be operated at these limits. The tables of "Electrical Characteristics" specify conditions for device operation. Note 2: Current into device pins is defined as positive. Current out of device pins is defined as negative. All voltages are referenced to ground unless otherwise specified. Note 3: |VT1| and |VOS| are changes in magnitude of VT1 and VOS, respectively, that occur when the input changes state. Note 4: All typicals are given for V CC = 5.0V and TA = +25C. Note 5: Threshold parameter limits specified as an algebraic value rather than by magnitude. Note 6: Hysteresis defined as VHST = VTH - VTL. Note 7: IIN includes the receiver input current and driver TRI-STATE leakage current. 3 www.national.com DS36276 Parameter Measurement Information DS011383-2 FIGURE 1. Driver VT1 and VOS Test Circuit DS011383-3 FIGURE 2. Driver VOH and VOL Test Circuit DS011383-4 FIGURE 3. Driver Short Circuit Test Circuit DS011383-5 FIGURE 4. Driver Differential Propagation Delay and Transition Time Test Circuit www.national.com 4 DS36276 Parameter Measurement Information (Continued) DS011383-6 FIGURE 5. Driver Differential Propagation Delays and Transition Times DS011383-7 FIGURE 6. Driver Propagation Delay Test Circuit DS011383-8 FIGURE 7. Driver Propagation Delays DS011383-9 S1 to DO for DI = 3V S1 to DO for DI = 0V FIGURE 8. Driver TRl-STATE Test Circuit (tPZH, tPHZ) 5 www.national.com DS36276 Parameter Measurement Information (Continued) DS011383-10 FIGURE 9. Driver TRI-STATE Delays (tPZH, tPHZ) DS011383-11 S1 to DO for DI = 0V S1 to DO for DI = 3V FIGURE 10. Driver TRI-STATE Test Circuit (tPZL, tPLZ) DS011383-12 FIGURE 11. Driver TRl-STATE Delays (tPZL, tPLZ) DS011383-13 FIGURE 12. Receiver VOH and VOL DS011383-14 FIGURE 13. Receiver Propagation Delay Test Circuit www.national.com 6 DS36276 Parameter Measurement Information (Continued) DS011383-15 FIGURE 14. Receiver Propagation Delays DS011383-16 FIGURE 15. Receiver TRI-STATE Delay Test Circuit DS011383-18 DS011383-17 S1 -1.5V S2 CLOSED S3 OPEN S1 1.5V S2 OPEN S3 CLOSED DS011383-20 DS011383-19 S1 1.5V S2 CLOSED S3 CLOSED S1 -1.5V S2 CLOSED S3 CLOSED Note 8: The input pulse is supplied by a generator having the following characteristics: f = 1.0 MHz, 50% duty cycle, tr and t f Note 9: CL includes probe and stray capacitance. < 6.0 ns, ZO = 50. Note 10: Diodes are 1N916 or equivalent. FIGURE 16. Receiver Enable and Disable Timing 7 www.national.com DS36276 Typical Performance Characteristics Differential Output Voltage vs Output Current Differential Output Voltage vs Output Current DS011383-21 Driver VOH vs IOH vs VCC DS011383-22 Driver VOH vs IOH vs Temperature DS011383-23 Driver VOL vs IOL vs VCC DS011383-24 Driver VOL vs IOL vs Temperature DS011383-25 www.national.com DS011383-26 8 (Continued) Receiver VOH vs IOH vs VCC Receiver VOH vs IOH vs Temperature DS011383-27 Receiver VOL vs IOL vs VCC DS36276 Typical Performance Characteristics DS011383-28 Receiver VOL vs IOL vs Temperature DS011383-29 Supply Currrent vs Supply Voltage DS011383-30 Supply Current vs Temperature DS011383-31 DS011383-32 9 www.national.com DS36276 Typical Performance Characteristics (Continued) Voltage Output vs Voltage Input (Hysteresis) DS011383-33 www.national.com 10 DS36276 FAILSAFE Multipoint Transceiver Physical Dimensions inches (millimeters) unless otherwise noted Order Number DS36276M NS Package Number M08A LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation Americas Email: support@nsc.com www.national.com National Semiconductor Europe Fax: +49 (0) 180-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 69 9508 6208 English Tel: +44 (0) 870 24 0 2171 Francais Tel: +33 (0) 1 41 91 8790 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Asia Pacific Customer Response Group Tel: 65-2544466 Fax: 65-2504466 Email: ap.support@nsc.com National Semiconductor Japan Ltd. Tel: 81-3-5639-7560 Fax: 81-3-5639-7507 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications. IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Communications and Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP(R) Products www.dlp.com Energy and Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive Microcontrollers microcontroller.ti.com Video and Imaging RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap Wireless Connectivity www.ti.com/wirelessconnectivity TI E2E Community Home Page www.ti.com/video e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2011, Texas Instruments Incorporated