2.2x1.4mm SURFACE MOUNT LED LAMP Part Number: AA2214VRBXS/A-SC-AMT Blue ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Description The source color devices are made with InGaN Light Features Emitting Diode. z High reliability LED package. Static electricity and surge damage the LEDS. z 2.2mm x 1.4mm, 1.3mm high. It is recommended to use a wrist band or anti-electrostatic z Low power consumption. glove when handling the LEDs. z Available on tape and reel. All devices, equipment and machinery must be electrically z Package : 2000pcs / reel. grounded. z Moisture sensitivity level : level 3. Applications z RoHS compliant. z Traffic signaling. z Backlighting (illuminated advertising , general lighting). z Interior and exterior automotive lighting. z Substitution of micro incandescent lamps. z Reading lamps. Package Dimensions z Signal and symbol luminaire for orientation. z Marker lights (e.g. Steps, exit ways, etc). z Decorative and entertainment lighting. z Indoor and outdoor commercial and residential architectural lighting. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAL5013 REV NO: V.1 DATE: DEC/23/2010 PAGE: 1 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1201007474 Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might lead to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. 3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry. 4.1. The outer diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. The inner diameter of the nozzle should be as large as possible. 4.2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup. 4.3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production. 5. As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plating of leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances. SPEC NO: DSAL5013 REV NO: V.1 DATE: DEC/23/2010 PAGE: 2 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1201007474 Selection Guide Part No. Dice AA2214VRBXS/A-SC-AMT Iv (mcd) [2] @ 20mA Lens Type Blue (InGaN) Viewing Angle [1] Code. Min. Max. S 500 700 T 700 1000 U 1000 1300 Water Clear 21/2 120 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Absolute Maximum Ratings at Ta=25C Parameter Symbol Value Unit Power dissipation PD 120 mW Reverse Voltage VR 5 V Junction temperature TJ 110 C Operating Temperature Top -40 To +100 C Storage Temperature Tstg -40 To +110 C IF 30 mA IFM 100 mA 250 V 300 C/W DC Forward Current[1] Peak Forward Current [2] Electrostatic Discharge Threshold (HBM) Thermal Resistance (Junction/ambient) [1] Rth j-a Notes: 1. Rth(j-a) Results from mounting on PC board FR4 (pad size16 mm 2 per pad), 2. 1/10 Duty Cycle, 0.1ms Pulse Width. Electrical / Optical Characteristics at Ta=25C Parameter Chromaticity Coordinates IF=20mA Forward Voltage IF=20mA [Min.] Forward Voltage IF=20mA [Typ.] Forward Voltage IF=20mA [Max.] Symbol Value Unit X [1] 0.19 - Y[1] 0.19 - VF [2] 3.3 V 4.0 Reverse Current (VR = 5V) [Max.] IR 50 uA Temperature coefficient of VF IF=20mA, -10C T100C [Typ.] TCV -2.2 mV/C Temperature coefficient of X IF=20mA, -10C T100C [Typ.] TCx -0.1 10-3/C Temperature coefficient of Y IF=20mA, -10C T100C [Typ.] TCy -0.2 10-3C Notes: 1.Measurement tolerance of the chromaticity coordinates is 0.01. 2.Forward Voltage: +/-0.1V. SPEC NO: DSAL5013 REV NO: V.1 DATE: DEC/23/2010 PAGE: 3 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1201007474 Blue AA2214VRBXS/A-SC-AMT SPEC NO: DSAL5013 REV NO: V.1 DATE: DEC/23/2010 PAGE: 4 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1201007474 AA2214VRBXS/A-SC-AMT CIE 1931 0.26 0.24 0.22 BSC1 y 0.20 BSC2 0.18 BSC3 0.16 0.14 0.12 0.14 0.16 0.18 0.2 0.22 0.24 x Bin code BSC1 x y 0.1861 0.2232 0.1813 0.2021 0.1993 0.1957 0.2040 0.2163 Bin code BSC2 x y 0.1813 0.2021 0.1767 0.1819 0.1947 0.1760 0.1993 0.1957 Bin code BSC3 x y 0.1767 0.1819 0.1723 0.1626 0.1903 0.1572 0.1947 0.1760 Notes: Shipment may contain more than one chromaticity regions. Orders for single chromaticity region are generally not accepted. Measurement tolerance of the chromaticity coordinates is 0.01. SPEC NO: DSAL5013 REV NO: V.1 DATE: DEC/23/2010 PAGE: 5 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1201007474 AA2214VRBXS/A-SC-AMT Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAL5013 REV NO: V.1 DATE: DEC/23/2010 PAGE: 6 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1201007474 PACKING & LABEL SPECIFICATIONS AA2214VRBXS/A-SC-AMT SPEC NO: DSAL5013 REV NO: V.1 DATE: DEC/23/2010 PAGE: 7 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1201007474 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below Lot Tolerance Percent Defective (LTPD) : 10% No. Test Item Standards Test Times / Number of Cycles Damaged Test Condition 1 Continuous operating test - Ta =25C ,IF = maximum rated current* 1,000 h 0 / 22 2 High Temp. operating test EIAJED4701/100(101) Ta = 100C IF = maximum rated current* 1,000 h 0 / 22 3 Low Temp. operating test - Ta = -40C, IF = maximum rated current* 1,000 h 0 / 22 4 High temp. storage test EIAJEDTa = maximum rated storage temperature 4701/100(201) 1,000 h 0 / 22 5 Low temp. storage test EIAJED4701/100(202) Ta = -40C 1,000 h 0 / 22 6 High temp. & humidity storage test EIAJED4701/100(103) Ta = 60C, RH = 90% 1,000 h 0 / 22 7 High temp. & humidity operating test EIAJED4701/100(102) Ta = 60C, RH = 90% IF = maximum rated current* 1,000 h 0 / 22 8 Soldering reliability test EIAJED4701/100(301) Moisture soak : 30C,70% RH, 72h Preheat : 150~180C(120s max.) Soldering temp : 260C(10s) 3 times 0 / 18 9 Thermal shock operating test - Ta = -40C(15min) ~ 100C(15min) IF = derated current at 100C 1,000 cycles 0 / 22 10 Thermal shock test - Ta = -40C(15min) ~ maximum rated storage temperature(15min) 1,000 cycles 0 / 22 11 Electric Static Discharge (ESD) EIAJED4701/100(304) C = 100pF , R2 = 1.5K V = 250V Once each Polarity 0 / 22 12 Vibration test - a = 196m/s , f = 100~2KHz , t = 48min for all xyz axes 4 times 0 / 22 * : Refer to forward current vs. derating curve diagram Failure Criteria Items Symbols Conditions Failure Criteria luminous Intensity lv IF = 20mA Testing Min. Value <Spec.Min.Value x 0.5 Forward Voltage VF IF = 20mA Testing Max. Value Spec.Max.Value x 1.2 Reverse Current IR VR = Maximum Rated Reverse Voltage Testing Max. Value Spec.Max.Value x 2.5 High temp. storage test - - Occurrence of notable decoloration, deformation and cracking SPEC NO: DSAL5013 REV NO: V.1 DATE: DEC/23/2010 PAGE: 8 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1201007474