TAK-610 Kit Vishay Micro-Measurements Strain Gage Application Kit for Transducers It is often of greatest convenience for the strain gage user to purchase all of the needed accessory supplies and materials in a single package. For this purpose, Micro-Measurements offers the TAK-610 Strain Gage Application Kit. Kit contents are available separately. Refer to the appropriate sections of this catalog for specific component details. TAK-610 KIT CONTENTS * M-Bond 610 Kit * CSM-1A Degreaser, 1 can * MCA-1 Conditioner A, 1 bottle * MN5A-1 Neutralizer 5A, 1 bottle * SCP-1 220 grit, 1 roll, 100 ft (30 m) * SCP-2 320 grit, 1 roll, 100 ft (30 m) * SCP-3 400 grit, 1 roll, 100 ft (30 m) * CSP-1 Cotton Swabs, 1 package * GSP-1 Gauze Sponges, 1 package * MJG-2 Mylar Tape, 1 roll * PDT-1 Paper Drafting Tape, 1 roll * 361A-20R-25 Solder, 1 roll, 25 ft (7.6 m) * FAR-1 Rosin Flux Kit * CPF-AST Bondable Terminals, 1 box * 426-DFV, 4-Conductor Leadwire, 100 ft (30 m) * M-Coat C, 1 oz (30 ml) * 134-AWP Solid Copper Wire, 500 ft (150 m) * SGP-2 Silicone Rubber, 1 piece * HSC-1 No. 1 Spring Clamp, 4 each * TFE-1 Teflon Film, 1 roll * BTW-1 Blunt-Nose Tweezers * Plastic Tool Box www.vishaymg.com 64 micro-measurements@vishay.com Document Number: 11572 Revision 22-Aug-03