micro-measurements@vishay.com
TAK-610 Kit
Vishay Micro-Measurements
www.vishaymg.com
64
Document Number: 11572
Revision 22-Aug-03
Strain Gage Application Kit
for Transducers
TAK-610 KIT CONTENTS
• M-Bond 610 Kit
• CSM-1A Degreaser, 1 can
• MCA-1 Conditioner A, 1 bottle
• MN5A-1 Neutralizer 5A, 1 bottle
• SCP-1 220 grit, 1 roll, 100 ft (30 m)
• SCP-2 320 grit, 1 roll, 100 ft (30 m)
• SCP-3 400 grit, 1 roll, 100 ft (30 m)
• CSP-1 Cotton Swabs, 1 package
• GSP-1 Gauze Sponges, 1 package
• MJG-2 Mylar Tape, 1 roll
• PDT-1 Paper Drafting Tape, 1 roll
• 361A-20R-25 Solder, 1 roll, 25 ft (7.6 m)
• FAR-1 Rosin Flux Kit
• CPF-AST Bondable Terminals, 1 box
• 426-DFV, 4-Conductor Leadwire, 100 ft (30 m)
• M-Coat C, 1 oz (30 ml)
• 134-AWP Solid Copper Wire, 500 ft (150 m)
• SGP-2 Silicone Rubber, 1 piece
• HSC-1 No. 1 Spring Clamp, 4 each
• TFE-1 Teflon Film, 1 roll
• BTW-1 Blunt-Nose Tweezers
• Plastic Tool Box
It is often of greatest convenience for the strain gage user to purchase all of the needed accessory supplies and materials in a
single package. For this purpose, Micro-Measurements offers the TAK-610 Strain Gage Application Kit. Kit contents are available
separately. Refer to the appropriate sections of this catalog for specific component details.
