C106 Series Preferred Devices Sensitive Gate Silicon Controlled Rectifiers Reverse Blocking Thyristors Glassivated PNPN devices designed for high volume consumer applications such as temperature, light, and speed control; process and remote control, and warning systems where reliability of operation is important. Features * * * * * * Glassivated Surface for Reliability and Uniformity Power Rated at Economical Prices Practical Level Triggering and Holding Characteristics Flat, Rugged, Thermopad Construction for Low Thermal Resistance, High Heat Dissipation and Durability Sensitive Gate Triggering Pb-Free Packages are Available* http://onsemi.com SCRs 4 A RMS, 200 - 600 Volts G A K TO-225AA CASE 077 STYLE 2 MARKING DIAGRAM & PIN ASSIGNMENT 1. Cathode 2. Anode 3. Gate Y WW C106xx xx G YWW C106xxG = Year = Work Week = Device Code = B, D, D1, M, M1 = Pb-Free Package ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet. *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. (c) Semiconductor Components Industries, LLC, 2005 August, 2005 - Rev. 8 1 Publication Order Number: C106/D C106 Series MAXIMUM RATINGS (TJ = 25C unless otherwise noted) Characteristic Symbol Peak Repetitive Off-State Voltage (Note 1) (Sine Wave, 50-60 Hz, RGK = 1 kW, TC = -40 to 110C) Max Unit VDRM, VRRM V 200 400 600 C106B C106D, C106D1* C106M, C106M1* On-State RMS Current (180 Conduction Angles, TC = 80C) IT(RMS) 4.0 A Average On-State Current (180 Conduction Angles, TC = 80C) IT(AV) 2.55 A Peak Non-Repetitive Surge Current (1/2 Cycle, Sine Wave, 60 Hz, TJ = +110C) ITSM 20 A I2t 1.65 A2s Forward Peak Gate Power (Pulse Width v1.0 msec, TC = 80C) PGM 0.5 W Forward Average Gate Power (Pulse Width v1.0 msec, TC = 80C) PG(AV) 0.1 W Forward Peak Gate Current (Pulse Width v1.0 msec, TC = 80C) IGM 0.2 A Circuit Fusing Considerations (t = 8.3 ms) Operating Junction Temperature Range TJ -40 to +110 C Storage Temperature Range Tstg -40 to +150 C Mounting Torque (Note 2) 6.0 in. lb. - Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; however, positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. 2. Torque rating applies with use of compression washer (B52200F006). Mounting torque in excess of 6 in. lb. does not appreciably lower case-to-sink thermal resistance. Anode lead and heatsink contact pad are common. THERMAL CHARACTERISTICS (TC = 25C unless otherwise noted.) Symbol Max Unit Thermal Resistance, Junction-to-Case Characteristic RqJC 3.0 C/W Thermal Resistance, Junction-to-Ambient RqJA 75 C/W TL 260 C Maximum Lead Temperature for Soldering Purposes 1/8 in. from Case for 10 Seconds ORDERING INFORMATION Package Shipping C106B TO-225AA 500 Units / Box C106BG TO-225AA (Pb-Free) 500 Units / Box C106D TO-225AA 500 Units / Box C106DG TO-225AA (Pb-Free) 500 Units / Box C106D1* TO-225AA 500 Units / Box C106D1G* TO-225AA (Pb-Free) 500 Units / Box C106M TO-225AA 500 Units / Box C106MG TO-225AA (Pb-Free) 500 Units / Box C106M1* TO-225AA 500 Units / Box C106M1G* TO-225AA (Pb-Free) 500 Units / Box Device For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *D1 signifies European equivalent for D suffix and M1 signifies European equivalent for M suffix. http://onsemi.com 2 C106 Series ELECTRICAL CHARACTERISTICS (TC = 25C unless otherwise noted.) Characteristic Symbol Min Typ Max Unit - - - - 10 100 mA mA - - 2.2 V - - 15 35 200 500 - - 6.0 0.4 0.5 0.60 0.75 0.8 1.0 0.2 - - - - 0.20 0.35 5.0 7.0 - - - 0.19 0.33 0.07 3.0 6.0 2.0 - 8.0 - OFF CHARACTERISTICS IDRM, IRRM Peak Repetitive Forward or Reverse Blocking Current (VAK = Rated VDRM or VRRM, RGK = 1000 Ohms) TJ = 25C TJ = 110C ON CHARACTERISTICS Peak Forward On-State Voltage (Note 3) (ITM = 4 A) VTM Gate Trigger Current (Continuous dc) (Note 4) (VAK = 6 Vdc, RL = 100 Ohms) mA IGT TJ = 25C TJ = -40C Peak Reverse Gate Voltage (IGR = 10 mA) VGRM Gate Trigger Voltage (Continuous dc) (Note 4) (VAK = 6 Vdc, RL = 100 Ohms) VGT V TJ = 25C TJ = -40C Gate Non-Trigger Voltage (Continuous dc) (Note 4) (VAK = 12 V, RL = 100 Ohms, TJ = 110C) VGD Latching Current (VAK = 12 V, IG = 20 mA) IL V mA TJ = 25C TJ = -40C Holding Current (VD = 12 Vdc) (Initiating Current = 20 mA, Gate Open) V IH mA TJ = 25C TJ = -40C TJ = +110C DYNAMIC CHARACTERISTICS Critical Rate-of-Rise of Off-State Voltage (VAK = Rated VDRM, Exponential Waveform, RGK = 1000 Ohms, TJ = 110C) dv/dt V/ms 3. Pulse Test: Pulse Width 2.0 ms, Duty Cycle 2%. 4. RGK is not included in measurement. Voltage Current Characteristic of SCR + Current Symbol Parameter Anode + VTM VDRM Peak Repetitive Off State Forward Voltage IDRM Peak Forward Blocking Current VRRM Peak Repetitive Off State Reverse Voltage IRRM Peak Reverse Blocking Current VTM Peak On State Voltage IH Holding Current on state IRRM at VRRM Reverse Blocking Region (off state) Reverse Avalanche Region Anode - http://onsemi.com 3 IH + Voltage IDRM at VDRM Forward Blocking Region (off state) C106 Series 110 P(AV), AVERAGE ON-STATE POWER DISSIPATION (WATTS) 10 TC, CASE TEMPERATURE ( C) 100 90 DC 80 70 60 50 HALF SINE WAVE RESISTIVE OR INDUCTIVE LOAD. 50 to 400 Hz 40 30 20 10 0 .4 .8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 IT(AV) AVERAGE ON-STATE CURRENT (AMPERES) Figure 1. Average Current Derating HALF SINE WAVE RESISTIVE OR INDUCTIVE LOAD 50 TO 400Hz. 6 DC 4 2 0 0 .4 .8 1.2 1.6 2.0 2.4 2.6 3.2 3.6 4.0 IT(AV) AVERAGE ON-STATE CURRENT (AMPERES) Figure 2. Maximum On-State Power Dissipation 1000 10 100 1 -40 -25 -10 5 20 35 50 65 80 95 10 -40 -25 110 -10 5 20 35 50 65 80 95 TJ, JUNCTION TEMPERATURE (C) TJ, JUNCTION TEMPERATURE (C) Figure 3. Typical Gate Trigger Current versus Junction Temperature Figure 4. Typical Holding Current versus Junction Temperature 1.0 110 1000 0.9 I L , LATCHING CURRENT (m A) VGT , GATE TRIGGER VOLTAGE (V) 8 IH, HOLDING CURRENT (m A) IGT, GATE TRIGGER CURRENT (m A) 100 JUNCTION TEMPERATURE 110C 0.8 0.7 100 0.6 0.5 0.4 0.3 0.2 -45 -25 -10 5 20 35 50 65 80 95 110 10 -40 -25 -10 5 20 35 50 65 80 95 TJ, JUNCTION TEMPERATURE (C) TJ, JUNCTION TEMPERATURE (C) Figure 5. Typical Gate Trigger Voltage versus Junction Temperature Figure 6. Typical Latching Current versus Junction Temperature http://onsemi.com 4 110 C106 Series PACKAGE INTERCHANGEABILITY The dimensional diagrams below compare the critical dimensions of the ON Semiconductor C-106 package with competitive devices. It has been demonstrated that the smaller dimensions of the ON Semiconductor package make it compatible in most lead-mount and chassis-mount applications. The user is advised to compare all critical dimensions for mounting compatibility. .295 ____ .305 .145 ____ .155 .148 ____ .158 .115 ____ .130 .425 ____ .435 .400 ____ .360 .095 ____ .105 .385 ____ .365 .575 ____ .655 .040 .020 ____ .026 .094 BSC .025 ____ .035 .026 ____ .019 .520 ____ .480 5_ TYP 1 2 3 .050 ____ .095 .127 ____ DIA .123 .135 ____ .115 .315 ____ .285 .420 ____ .400 .105 ____ .095 .105 ____ .095 .015 ____ .025 .054 ____ .046 .045 ____ .055 ON Semiconductor C-106 Package .190 ____ .170 Competitive C-106 Package http://onsemi.com 5 C106 Series PACKAGE DIMENSIONS TO-225 CASE 77-09 ISSUE Z -B- U F Q -A- NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 077-01 THRU -08 OBSOLETE, NEW STANDARD 077-09. C M 1 2 3 H DIM A B C D F G H J K M Q R S U V K J V G S R 0.25 (0.010) A M M B M D 2 PL 0.25 (0.010) M A M B M INCHES MIN MAX 0.425 0.435 0.295 0.305 0.095 0.105 0.020 0.026 0.115 0.130 0.094 BSC 0.050 0.095 0.015 0.025 0.575 0.655 5_ TYP 0.148 0.158 0.045 0.065 0.025 0.035 0.145 0.155 0.040 --- MILLIMETERS MIN MAX 10.80 11.04 7.50 7.74 2.42 2.66 0.51 0.66 2.93 3.30 2.39 BSC 1.27 2.41 0.39 0.63 14.61 16.63 5 _ TYP 3.76 4.01 1.15 1.65 0.64 0.88 3.69 3.93 1.02 --- STYLE 2: PIN 1. CATHODE 2. ANODE 3. GATE ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800-282-9855 Toll Free Literature Distribution Center for ON Semiconductor USA/Canada P.O. Box 61312, Phoenix, Arizona 85082-1312 USA Phone: 480-829-7710 or 800-344-3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Fax: 480-829-7709 or 800-344-3867 Toll Free USA/Canada Phone: 81-3-5773-3850 Email: orderlit@onsemi.com http://onsemi.com 6 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. C106/D