MCS 0402, MCT 0603, MCU 0805, MCA 1206 - Professional Vishay Beyschlag Professional Thin Film Chip Resistors FEATURES * Approved according to EN 140401-801 * Excellent overall stability: Class 0.5 * Professional tolerance of value: 0.5 % and 1 % * Lead (Pb)-free solder contacts * Compliant to RoHS directive 2002/95/EC APPLICATIONS * * * * Automotive Telecommunication Medical equipment Industrial equipment MCS 0402, MCT 0603, MCU 0805 and MCA 1206 Professional Thin Film Flat Chip Resistors are the perfect choice for most fields of modern professional electronics where reliability and stability is of major concern. Typical applications include telecommunication, medical equipment and high-end computer and audio/video electronics. METRIC SIZE INCH: METRIC: 0402 0603 0805 1206 RR 1005M RR 1608M RR 2012M RR 3216M TECHNICAL SPECIFICATIONS DESCRIPTION MCS 0402 Metric size Resistance range MCT 0603 MCU 0805 MCA 1206 RR 1005M RR 1608M RR 2012M RR 3216M 10 to 4.99 M 1 to 10 M 1 to 10 M 1 to 2 M Resistance tolerance 1 %; 0.5 % Temperature coefficient 50 ppm/K; 25 ppm/K Operation mode Standard Power Standard Power Standard Power Standard Power Climatic category (LCT/UCT/days) 55/125/56 55/155/56 55/125/56 55/155/56 55/125/56 55/155/56 55/125/56 55/155/56 0.063 W 0.1 W 0.1 W 0.125 W 0.125 W 0.2 W 0.25 W 0.4 W Rated dissipation, P70 (1) Operating voltage, Umax. AC/DC 50 V 125 C Film temperature Max. resistance change at P70 for resistance range, |R/R| max., after: 75 V 155 C 10 to 4.99 M 125 C 150 V 155 C 1 to 10 M 125 C 155 C 1 to 10 M 200 V 125 C 155 C 1 to 10 M 1000 h 0.25 % 0.5 % 0.25 % 0.5 % 0.25 % 0.5 % 0.25 % 0.5 % 8000 h 0.5 % 1.0 % 0.5 % 1.0 % 0.5 % 1.0 % 0.5 % 1.0 % 225 000 h 1.5 % 1.5 % 1.5 % 1.5 % Insulation voltage: Failure rate: FITobserved 1 min; Uins 75 V 100 V 200 V 300 V Continuous 75 V 75 V 75 V 75 V 0.1 x 10-9/h 0.1 x 10-9/h 0.1 x 10-9/h 0.1 x 10-9/h Notes (1) The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is not exceeded. * These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime. Document Number: 28705 Revision: 20-Nov-09 For technical questions, contact: thinfilmchip@vishay.com www.vishay.com 191 MCS 0402, MCT 0603, MCU 0805, MCA 1206 - Professional Vishay Beyschlag Professional Thin Film Chip Resistors PART NUMBER AND PRODUCT DESCRIPTION (1) PART NUMBER: MCT06030D4641DPW00 M C T 0 6 0 3 0 D 4 6 4 1 D P W 0 0 MODEL/SIZE SPECIAL CHARACTER TCR VALUE TOLERANCE PACKAGING SPECIAL MCS0402 MCT0603 MCU0805 MCA1206 0 = Neutral D = 25 ppm/K C = 50 ppm/K Z = Jumper 3 digit value 1 digit multiplier D = 0.5 % F=1% Z = Jumper P5 PW E0 Up to 2 digits 00 = Standard MULTIPLIER 7 = *10-3 8 = *10-2 9 = *10-1 0 = *100 1 = *101 2 = *102 3 = *103 4 = *104 5 = *105 6 = *106 0000 = Jumper PRODUCT DESCRIPTION: MCT 0603-25 0.5 % PW 4K64 MCT 0603 -25 0.5 % PW 4K64 MODEL MCS MCT MCU MCA SIZE TCR TOLERANCE PACKAGING RESISTANCE VALUE 0402 0603 0805 1206 25 ppm/K 50 ppm/K 0.5 % 1% P5 PW E0 47K = 47 k 50R1 = 50.1 0R0 = Jumper (2) Notes (1) Products can be ordered using either the PRODUCT DESCRIPTION or the PART NUMBER (2) Jumpers are ordered by the resistance value 0 , e.g. MCT 0603 P5 0R0 TEMPERATURE COEFFICIENT AND RESISTANCE RANGE RESISTANCE VALUE (3) DESCRIPTION TCR 50 ppm/K 25 ppm/K Jumper TOLERANCE MCS 0402 MCT 0603 MCU 0805 MCA 1206 1% 10 to 4.99 M 1 to 10 M 1 to 10 M 1 to 2 M 0.5 % 100 to 221 k 39 to 511 k 10 to 1.5 M 10 to 2 M 0.5 % 100 to 221 k 39 to 511 k 10 to 1.5 M 10 to 2 M - 20 m; Imax. = 0.63 A 20 m; Imax. = 1 A 20 m; Imax. = 1.5 A 20 m; Imax. = 2 A Note (3) Resistance values to be selected for 1 % tolerance from E24 and E96; for 0.5 % tolerance from E24 and E192 Resistance ranges printed in bold are preferred TCR/tolerance combinations with optimized availability. PACKAGING REEL MODEL MCS 0402 MCT 0603 MCU 0805 MCA 1206 www.vishay.com 192 PIECES/ PAPER TAPE ON REEL CODE 10 000 E0 5000 P5 20 000 PW 5000 P5 20 000 PW 5000 P5 For technical questions, contact: thinfilmchip@vishay.com Document Number: 28705 Revision: 20-Nov-09 MCS 0402, MCT 0603, MCU 0805, MCA 1206 - Professional Vishay Beyschlag Professional Thin Film Chip Resistors DIMENSIONS T1 W WT H T2 L DIMENSIONS AND MASS H (mm) L (mm) W (mm) WT (mm) T1 (mm) T2 (mm) MASS (mg) MCS 0402 0.32 0.05 1.0 0.05 0.5 0.05 > 75 % of W 0.2 + 0.1/- 0.15 0.2 0.1 0.6 MCT 0603 0.45 + 0.1/- 0.05 1.55 0.05 0.85 0.1 > 75 % of W 0.3 + 0.15/- 0.2 0.3 + 0.15/- 0.2 1.9 MCU 0805 0.45 + 0.1/- 0.05 2.0 0.1 1.25 0.15 > 75 % of W 0.4 + 0.1/- 0.2 0.4 + 0.1/- 0.2 4.6 MCA 1206 0.55 0.1 3.2 0.1/- 0.2 1.6 0.15 > 75 % of W 0.5 0.25 0.5 0.25 9.2 TYPE SOLDER PAD DIMENSIONS X G Y Z RECOMMENDED SOLDER PAD DIMENSIONS WAVE SOLDERING TYPE REFLOW SOLDERING G (mm) Y (mm) X (mm) Z (mm) G (mm) Y (mm) X (mm) Z (mm) MCS 0402 - - - - 0.35 0.55 0.55 1.45 MCT 0603 0.55 1.10 1.10 2.75 0.65 0.70 0.95 2.05 MCU 0805 0.80 1.25 1.50 3.30 0.90 0.90 1.40 2.70 MCA 1206 1.40 1.50 1.90 4.40 1.50 1.15 1.75 3.80 Note * The rated dissipation applies only if the permitted film temperature is not exceeded. Furthermore, a high level of ambient temperature or of power dissipation may raise the temperature of the solder joint, hence special solder alloys or board materials may be required to maintain the reliability of the assembly. Specified power rating above 125 C requires dedicated heat-sink pads, which depend on board materials. The given solder pad dimensions reflect the considerations for board design and assembly as outlined e.g. in standards IEC 61188-5-x, or in publication IPC-7351. They do not guarantee any supposed thermal properties, particularly as these are also strongly influenced by many other parameters. Still, the given solder pad dimensions will be found adequate for most general applications, e.g. those referring to "standard operation mode". Please note however that applications for "power operation mode" require special considerations for the design of solder pads and adjacent conductor areas. Document Number: 28705 Revision: 20-Nov-09 For technical questions, contact: thinfilmchip@vishay.com www.vishay.com 193 MCS 0402, MCT 0603, MCU 0805, MCA 1206 - Professional Vishay Beyschlag Professional Thin Film Chip Resistors DESCRIPTION APPROVALS Production is strictly controlled and follows an extensive set of instructions established for reproducibility. A homogeneous film of metal alloy is deposited on a high grade Al2O3 ceramic substrate and conditioned to achieve the desired temperature coefficient. Specially designed inner contacts are deposited on both sides. A special laser is used to achieve the target value by smoothly cutting a meander groove in the resistive layer without damaging the ceramics. For the high and low ohmic range, optimized Cermet products provide comparable properties. The resistor elements are covered by a protective coating designed for electrical, mechanical and climatic protection. The terminations receive a final pure tin on nickel plating. The resistors are approved within the IECQ-CECC Quality Assessment System for Electronic Components to the detail specification EN 140401-801 which refers to EN 60115-1, EN 140400 and the variety of environmental test procedures of the IEC 60068 (3) series. The detail specification refers to the climatic category 55/125/56, which relates to the "standard operation mode" of this datasheet. The result of the determined production is verified by an extensive testing procedure and optical inspection performed on 100 % of the individual chip resistors. Only accepted products are laid directly into the paper tape in accordance with IEC 60286-3 (3). Conformity is attested by the use of the CECC Logo ( the Mark of Conformity on the package label. ) as Vishay BEYSCHLAG has achieved "Approval of Manufacturer" in accordance with IEC QC 001002-3, clause 2. The release certificate for "Technology Approval Schedule" in accordance with CECC 240001 based on IEC QC 001002-3, clause 6 is granted for the Vishay BEYSCHLAG manufacturing process. RELATED PRODUCTS This product family of thin film flat chip resistors is completed by Zero Ohm Jumpers. ASSEMBLY The resistors are suitable for processing on automatic SMD assembly systems. They are suitable for automatic soldering using wave, reflow or vapour phase as shown in IEC 61760-1. The encapsulation is resistant to all cleaning solvents commonly used in the electronics industry, including alcohols, esters and aqueous solutions. The suitability of conformal coatings, if applied, shall be qualified by appropriate means to ensure the long-term stability of the whole system. The resistors are RoHS compliant, the pure tin plating provides compatibility with lead (Pb)-free and lead-containing soldering processes. Solderability is specified for 2 years after production or requalification. The permitted storage time is 20 years. The immunity of the plating against tin whisker growth has been proven under extensive testing. For more information about products with better TCR and tighter tolerance please refer to the Precision Thin Film Chip Resistors datasheet document no. 28700. On request, resistors are available with established reliability in accordance with EN 140401-801 version E. Please refer to the special datasheet document no. 28744 for information on failure rate level, available resistance ranges and order codes. Precision chip resistor arrays may be used in voltage divider applications or precision amplifiers where close matching between multiple resistors is necessary. ACAS 0612 chip arrays are specified by the following datasheets: * Professional type, document no. 28754 * Precision type, document no. 28751 (1) and the All products comply with the GADSL CEFIC-EECA-EICTA (2) list of legal restrictions on hazardous substances. This includes full compliance with the following directives: * 2000/53/EC End of Vehicle life Directive (ELV) an Annex II (ELV II) * 2002/95/EC Restriction of the Substances Directive (RoHS) use of Hazardous * 2002/96/EC Waste Electrical and Electronic Equipment Directive (WEEE) Notes (1) (2) (3) Global Automotive Declarable Substance List, see www.gadsl.org CEFIC (European Chemical Industry Council), EECA (European Electronic Component Manufacturers Association), EICTA (European trade organisation representing the information and communications technology and consumer electronics), see www.eicta.org/index.php?id=995 issues environment policy chemicals chemicals for electronics The quoted IEC standards are also released as EN standards with the same number and identical contents www.vishay.com 194 For technical questions, contact: thinfilmchip@vishay.com Document Number: 28705 Revision: 20-Nov-09 MCS 0402, MCT 0603, MCU 0805, MCA 1206 - Professional Vishay Beyschlag Professional Thin Film Chip Resistors Power Dissipation P FUNCTIONAL PERFORMANCE MCS 0402 MCT 0603 MCU 0805 0.2 MCA 1206 W 0.1 0 - 50 0 50 70 100 C 150 Ambient Temperature amb Power Dissipation P Derating - Standard Operation 0.5 MCS 0402 MCT 0603 0.4 MCU 0805 MCA 1206 0.3 W 0.2 0.1 - 50 0 50 70 100 C 150 Ambient Temperature amb Pulse Load Pmax. Derating - Power Operation MCS 0402 100 MCT 0603 MCU 0805 W MCA 1206 10 1 0.1 10 s 100 s 1 ms 10 ms 100 ms 1s 10 s Pulse Duration t i Maximum pulse load, single pulse; for permissible resistance change equivalent to 8000 h operation Single Pulse Document Number: 28705 Revision: 20-Nov-09 For technical questions, contact: thinfilmchip@vishay.com www.vishay.com 195 MCS 0402, MCT 0603, MCU 0805, MCA 1206 - Professional Continuous Pulse Load Pmax. Vishay Beyschlag Professional Thin Film Chip Resistors MCS 0402 100 MCT 0603 MCU 0805 W MCA 1206 10 1 0.1 10 s 100 s 1 ms 10 ms 100 ms 1s 10 s Pulse Duration t i Maximum pulse load, continuous pulses; for permissible resistance change equivalent to 8000 h operation Pulse Voltage Umax. Continuous Pulse 1 kV 100 V MCS 0402 MCT 0603 MCU 0805 MCA 1206 10 V 10 s 100 s 1 ms 10 ms 100 ms 1s 10 s Pulse Duration t i Maximum pulse voltage, single and continuous pulses; for permissible resistance change equivalent to 8000 h operation Test Voltage Pulse Voltage MCS 0402 10 kV MCT 0603 MCU 0805, MCA 1206 1 kV 100 V 10 V 10 100 1 k 10 k 100 k 1 M 10 M Resistance Value R Pulse load rating in accordance with EN 60115-1 clause 4.27; 1.2 s/50 s; 5 pulses at 12 s interval; for permissible resistance change 0.5 % 1.2/50 Pulse www.vishay.com 196 For technical questions, contact: thinfilmchip@vishay.com Document Number: 28705 Revision: 20-Nov-09 MCS 0402, MCT 0603, MCU 0805, MCA 1206 - Professional Vishay Beyschlag Test Voltage Professional Thin Film Chip Resistors MCS 0402 10 kV MCT 0603 MCU 0805, MCA 1206 1 kV 100 V 10 V 100 10 1 k 10 k 100 k 1 M 10 M Resistance Value R Pulse load rating in accordance with EN 60115-1 clause 4.27; 10 s/700 s; 10 pulses at 1 min intervals; for permissible resistance change 0.5 % Current Noise A1 10/700 Pulse 3 1 V/V 0.1 MCS 0402 MCT 0603 MCU 0805 MCA 1206 0.01 100 1 k 10 k 100 k 1 M 10 M Resistance Value R Current noise A1 in accordance with IEC 60195 |Z |/R Current Noise 2.0 1.5 1.0 MCT 0603 MCU 0805 0.5 0.3 0.1 1 3 10 GHz 20 Frequency f |Z|/R for 49.9 chip resistor RF-Behaviour Document Number: 28705 Revision: 20-Nov-09 For technical questions, contact: thinfilmchip@vishay.com www.vishay.com 197 MCS 0402, MCT 0603, MCU 0805, MCA 1206 - Professional Vishay Beyschlag Professional Thin Film Chip Resistors TESTS AND REQUIREMENTS All tests are carried out in accordance with the following specifications: EN 60115-1, generic specification (includes tests) temperature range: Lower Category Temperature, Upper Category Temperature; damp heat, long term, 56 days) is valid. EN 140400, sectional specification (includes schedule for qualification approval) Unless otherwise specified the following values apply: EN 140401-801, detail specification (includes schedule for conformance inspection) Relative humidity: 45 % to 75 % The components are approved in accordance with the European CECC-system, where applicable. The following table contains only the most important tests. For the full test schedule refer to the documents listed above. The testing also covers most of the requirements specified by EIA/IS-703 and JIS-C-5202. The tests are carried out in accordance with IEC 60068 and under standard atmospheric conditions in accordance with IEC 60068-1, 5.3. Climatic category LCT/UCT/56 (rated Temperature: 15 C to 35 C Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar). The components are mounted for testing on boards in accordance with EN 60115-1, 4.31 unless otherwise specified. The requirements stated in the Test Procedures and Requirements table are based on the required tests and permitted limits of EN 140401-801. However, some additional tests and a number of improvements against those minimum requirements have been included. TEST PROCEDURES AND REQUIREMENTS EN 60115-1 CLAUSE IEC 60068-2 TEST METHOD TEST PROCEDURE REQUIREMENTS PERMISSIBLE CHANGE (R) STABILITY CLASS 0.5 STABILITY CLASS 1 MCS 0402 10 to 33.2 k > 33.2 k to 4.99 M MCT 0603 10 to 100 k 1 to < 10 ; > 100 k to 10 M MCU 0805 10 to 221 k 1 to < 10 ; > 221 k to 10 M MCA 1206 10 to 332 k 1 to < 10 ; > 332 k to 2 M Stability for product types: 4.5 - Resistance 4.8.4.2 - Temperature coefficient 1 % R; 0.5 % R At (20/- 55/20) C and (20/125/20) C Endurance at 70 C: Standard operation mode 4.25.1 Endurance at 70 C: Power operation mode U = P 70 x R or U = Umax.; whichever is the less severe; 1.5 h on; 0.5 h off; 70 C; 1000 h (0.25 % R + 0.05 ) 70 C; 8000 h (0.5 % R + 0.05 ) U = P 70 x R or U = Umax.; whichever is the less severe; 1.5 h on; 0.5 h off; 70 C; 1000 h (0.5 % R + 0.05 ) 70 C; 8000 h (1 % R + 0.05 ) - Endurance at upper category temperature 125 C; 1000 h 155 C; 1000 h (0.25 % R + 0.05 ) (0.5 % R + 0.05 ) (0.5 % R + 0.05 ) (1 % R + 0.05 ) 78 (Cab) Damp heat, steady state (40 2) C; 56 days; (93 3) % RH (0.5 % R + 0.05 ) (1 % R + 0.05 ) 4.25.3 4.24 50 ppm/K; 25 ppm/K www.vishay.com 198 For technical questions, contact: thinfilmchip@vishay.com Document Number: 28705 Revision: 20-Nov-09 MCS 0402, MCT 0603, MCU 0805, MCA 1206 - Professional Vishay Beyschlag Professional Thin Film Chip Resistors TEST PROCEDURES AND REQUIREMENTS EN 60115-1 CLAUSE IEC 60068-2 TEST METHOD TEST PROCEDURE REQUIREMENTS PERMISSIBLE CHANGE (R) STABILITY CLASS 0.5 STABILITY CLASS 1 MCS 0402 10 to 33.2 k > 33.2 k to 4.99 M MCT 0603 10 to 100 k 1 to < 10 ; > 100 k to 10 M MCU 0805 10 to 221 k 1 to < 10 ; > 221 k to 10 M MCA 1206 10 to 332 k 1 to < 10 ; > 332 k to 2 M (0.5 % R + 0.05 ) (1 % R + 0.05 ) (0.1 % R + 0.01 ) (0.25 % R + 0.05 ) Stability for product types: Climatic sequence: 4.23 4.23.2 2 (Ba) dry heat UCT; 16 h 4.23.3 30 (Db) damp heat, cyclic 55 C; 24 h; > 90 % RH; 1 cycle 4.23.4 1 (Aa) cold LCT; 2 h 4.23.5 13 (M) low air pressure 8.5 kPa; 2 h; (25 10) C 4.23.6 30 (Db) damp heat, cyclic 55 C; 5 days; > 90 % RH; 5 cycles 4.23.7 - DC load U = P 70 x R Umax.; 1 min LCT = - 55 C UCT = 125 C 1 (Aa) Cold - 55 C; 2 h Rapid change of temperature 30 min at LCT and 30 min at UCT; LCT = - 55 C; UCT = 125 C; 5 cycles (0.1 % R + 0.01 ) no visible damage LCT = - 55 C; UCT = 125 C; 1000 cycles (0.25 % R + 0.05 ) no visible damage - 4.19 4.13 4.27 14 (Na) - - Short time overload; standard operation mode Short time overload; power operation mode Single pulse high voltage overload; standard operation mode Periodic electric overload; standard operation mode 4.37 - Document Number: 28705 Revision: 20-Nov-09 Periodic electric overload; power operation mode U = 2.5 x P 70 x R or U = 2 x Umax.; whichever is the less severe; 5s Severity no. 4: U = 10 x P 70 x R or U = 2 x Umax.; whichever is the less severe; 10 pulses 10 s/700 s U= 15 x P 70 x R or U = 2 x Umax.; whichever is the less severe; 0.1 s on; 2.5 s off; 1000 cycles (0.1 % R + 0.01 ) (0.25 % R + 0.05 ) (0.25 % R + 0.05 ) (0.5 % R + 0.05 ) (0.5 % R + 0.05 ) no visible damage (0.5 % R + 0.05 ) no visible damage For technical questions, contact: thinfilmchip@vishay.com (1 % R + 0.05 ) no visible damage www.vishay.com 199 MCS 0402, MCT 0603, MCU 0805, MCA 1206 - Professional Vishay Beyschlag Professional Thin Film Chip Resistors TEST PROCEDURES AND REQUIREMENTS EN 60115-1 CLAUSE IEC 60068-2 TEST METHOD TEST PROCEDURE REQUIREMENTS PERMISSIBLE CHANGE (R) STABILITY CLASS 0.5 STABILITY CLASS 1 MCS 0402 10 to 33.2 k > 33.2 k to 4.99 M MCT 0603 10 to 100 k 1 to < 10 ; > 100 k to 10 M MCU 0805 10 to 221 k 1 to < 10 ; > 221 k to 10 M MCA 1206 10 to 332 k 1 to < 10 ; > 332 k to 2 M Stability for product types: 4.22 6 (Fc) 4.17.2 58 (Td) Vibration Solderability Endurance by sweeping; 10 Hz to 2000 Hz; no resonance; amplitude 1.5 mm or 200 m/s2; 6 h (0.1 % R + 0.01 ) no visible damage Solder bath method; SnPb40; non-activated flux (215 3) C; (3 0.3) s Good tinning ( 95 % covered); no visible damage Solder bath method; SnAg3Cu0.5 or SnAg3.5; non-activated flux; (235 3) C; (2 0.2) s Good tinning ( 95 % covered); no visible damage (0.1 % R + 0.01 ) no visible damage (0.25 % R + 0.05 ) no visible damage 4.18.2 58 (Td) Resistance to soldering heat Solder bath method; (260 5) C; (10 1) s 4.29 45 (XA) Component solvent resistance Isopropyl alcohol + 50 C; method 2 21 (Ue3) Shear (adhesion) 4.33 21 (Ue1) Substrate bending Depth 2 mm, 3 times (0.1 % R + 0.01 ) no visible damage; no open circuit in bent position 4.7 - Voltage proof URMS = Uins; (60 5) s No flashover or breakdown 4.35 - Flammability IEC 60695-11-5, needle flame test; 10 s No burning after 30 s 4.32 www.vishay.com 200 No visible damage RR 1005M and RR 1608M; 9 N No visible damage RR 2012M and RR 3216M; 45 N For technical questions, contact: thinfilmchip@vishay.com Document Number: 28705 Revision: 20-Nov-09 MCS 0402, MCT 0603, MCU 0805, MCA 1206 - Professional Professional Thin Film Chip Resistors Vishay Beyschlag 12NC INFORMATION FOR HISTORICAL CODING REFERENCE ONLY * The resistors have a 12-digit numeric code starting with 2312. * The subsequent 4 digits indicate the resistor type, specification and packaging; see the 12NC table. * The remaining 4 digits indicate the resistance value: - The first 3 digits indicate the resistance value. - The last digit indicates the resistance decade in accordance with the Last digit of 12NC Indicating Resistance Decade table. Last Digit of 12NC Indicating Resistance Decade RESISTANCE DECADE LAST DIGIT 1 to 9.99 8 10 to 99.9 9 100 to 999 1 1 k to 9.99 k 2 10 k to 99.9 k 3 100 k to 999 k 4 1 M to 9.99 M 5 10 M to 99.9 M 6 12NC example The 12NC of a MCT 0603 resistor, value 47 k and TCR 50 with 1 % tolerance, supplied in cardboard tape of 5000 units per reel is: 2312 215 14703. 12NC - Resistor type and packaging CODE 2312 ... ..... DESCRIPTION CARDBOARD TAPE ON REEL TYPE TOL. P5 (5000 UNITS) E0 (10 000 UNITS) PW (20 000 UNITS) 1% - 275 1.... - 0.5 % - 275 5.... - 25 ppm/K 0.5 % - 276 5.... - Jumper - - 275 90001 - 1% 215 1.... - 205 1.... 0.5 % 215 5.... - 205 5.... 25 ppm/K 0.5 % 216 5.... - 206 5.... Jumper - 215 90001 - 205 90001 50 ppm/K 0.5 % 255 5.... - 245 5.... 25 ppm/K 0.5 % 256 5.... - 246 5.... Jumper - 255 90001 - 245 90001 TCR 50 ppm/K MCS 0402 50 ppm/K MCT 0603 MCU 0805 Document Number: 28705 Revision: 20-Nov-09 For technical questions, contact: thinfilmchip@vishay.com www.vishay.com 201 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1