Model 1604-1607 Standard Rotating Shaft Torque Sensor DESCRIPTION A line of rotary transformer torque sensors often ideal for test excitation provides increased signal/noise immunity. Capacity installations running long-term durability testing. Non-contact range from 50 in-lb to 100000 in-lb for shaft mounting configura- nature of the signal transfer virtually eliminates the need for tions. maintenance. High overload protection with high signal output helps prevent potential damage to the sensor. Carrier frequency FEATURES * 50 in-lb to 100000 in-lb capacity * 0.1 % non-linearity and hysteresis * Speed sensor and/or foot mount (optional) * High overload protection with high signal output (sensitivity) *Minimal maintenance due to bearings only contact * Carrier frequency excitation provides increased signal/noise immunity Model 1604-1607 PERFORMANCE SPECIFICATIONS TYPICAL SYSTEM DIAGRAM Characteristic Measure Mating Connectors & Cables Torque range 50 lb-in to 100000 lb-in Non-linearity 0.1 % of rated output Hysteresis 0.1 % of rated output Repeatability 0.05 % of rated output Output @ rated capacity 2 mV/V (nominal) 064-LW13621 Mating connector 064-LW13656 Mating connector, speed pickup 064-LW25469 Mating connector, zero velocity speed pickup 7200-28-XX* Mating connector & 6 conductor cable (unamplified unit with sense leads but not shunt cal) 7200-106-XX* Mating connector & 6 conductor cable (for connection to instrument 7541) 7204-00-XX* Speed sensor cable, pigtail leads at instrument 7204-16-XX* Speed sensor cable to instrument 7541 7220-47-XX* Zero velocity speed sensor cable, pigtail leads at instrument 7220-119-XX* Zero velocity speed sensor cable to instrument 7541 ENVIRONMENTAL SPECIFICATIONS Characteristic Measure Temperature, operating -29 C to 93 C [-20 F to 200 F] Temperature, compensated 21 C to 77 C [70 F to 170 F] Temperature effect, zero 0.002 % of rated output/F Temperature effect, output 0.002 % of reading/F * XX represents length in feet 100ft maximum ** XX represents length in feet 20ft maximum Customer Supplied Chart Recorder Alarm Panel Data Acquisition Computer PLC Lebow Products MENU VIEW TEST Display Units 7541-111 (Single Channel Display) 7541-112 (Dual Channel Display) 7541-115 (For Torque and Optional Speed Display) MODEL 7541 TARE HOLD ESC RESET ENTER ELECTRICAL SPECIFICATIONS Characteristic Measure Excitation 3.28 kHz optimum @ 10 Vac max. RMS Insulation resistance > 5000 mOhm @ 50 Vdc Bridge resistance 350 ohm (nominal) Number of bridges 1 Zero balance 1.0 % of rated output Optional 24368-2 Speed Sensor 22236 Zero Velocity Pickup Model 1604 Optional Foot Mount Optional Calibration Arm 14086-1 (for 500-2000 in-lbs) 14086-2 (for 50-200 in-lbs) 2 Honeywell * Sensing and Control 1604: 25413-1 1605: 25413-9 1606: 25413-17 1607: 25413-11 Standard Rotating Shaft Torque Sensor MECHANICAL SPECIFICATIONS Model Capacity lb-in Capacity N-m Max speed RPM Protected for overloads to lb-in Torsional stiffness lb-in/rad Rotating inertia lb-in sec2 Weight kg [lb] 1604-50 50 5 10000 150 5000 2.59 x 10-3 8,20 [18] 1604-100 100 10 10000 300 13500 2.59 x 10-3 8,20 [18] 1604-200 200 20 10000 600 33000 2.59 x 10 -3 8,20 [18] 1604-500 500 55 10000 1500 85000 2.59 x 10-3 8,20 [18] 1604-1K 1000 115 10000 3000 150000 2.59 x 10 -3 8,20 [18] 1604-2K 2000 225 10000 3000 225000 2.59 x 10-3 8,20 [18] 1605-2K 2000 225 10000 6000 700000 8.41 x 10 -3 12,70 [28] 1605-5K 5000 565 10000 15000 950000 8.41 x 10-3 12,70 [28] 1605-10K 10000 1130 10000 20000 1000000 8.41 x 10 -3 12,70 [28] 1606-20K 20000 2250 6700 60000 4080000 3.62 x 10-2 18,20 [40] 1606-30K 30000 3390 6700 60000 4080000 3.62 x 10-2 18,20 [40] 1607-50K 50000 5650 6000 150000 11800000 0.15 34,10 [75] 1607-100K 100000 11300 6000 150000 19950000 0.47 34,10 [75] MOUNTING DIMENSIONS Model C cm [in] L cm [in] N cm [in] P cm [in] U cm [in] K cm [in] A cm [in] B cm [in] D cm [in] E cm [in] F cm [in] H cm [in] 1604 25,40 [10] 15,24 [6] 5,32 [2] 10,16 [4] 2,54 [1.00]* 0,64 [0.25 sq]* 12,07 8,89 [4.75]OPTIONAL [3.50] 5,40 [2.13] 5,08 [2] 3,49 [1.38] 0,71 [0.28] 1605 32,39 [12.75] 18,42 [7.25] 6,99 [2.75] 11,99 [4.75] 3,81 [1.50] 0,95 [0.38 sq.] 16,51 [6.25] 6,35 [2.50] 6,67 [2.63] 3,81 [1.50] 1,03 [0.41] 1606 40,01 [15.75] 20,96 [8.25] 9,53 [3.75] 13,97 [5.50] 5,72 [2.25] RECEP. 1,27 18,42 13,34 MS-3102E-14S-5P [0.50 sq.] [7] [5.25] 7,62 [3] 1607 48,26 [19] 22,23 [8.75] 13,02 [5.13] 16,51 [6.50] 7,62 [3.00] 1,91 [0.75 sq.] 8,89 [3.50] SPEED SENSOR 10,16 [4] 24,59 [8.50] 13,97 [5.50] 1/4-28 UNF. THRU 7,62 RESTRAINING 5,08 STRAP 1,35 [0.53] ATTACH WHEN MOUNTED [3] NOT FOOT[2] 8,89 [3.50] * 50, 100, 200 lb-in units: K=3/16 in sq., U=3/4 in OPTIONAL SPEED SENSOR F B L C 1/4-28 UNF. THRU ATTACH RESTRAINING STRAP WHEN NOT FOOT MOUNTED RECEP. MS-3102E-14S-5P 1,35 [0.53] U DIA. +.0000 -.0005 K F N 5,08 [2] N P U DIA. +.0000 -.0005 F K F B L C N For reference only N H 4 HOLES +.000 -.010 OPTIONAL FOOT MOUNT E E A P Honeywell * Sensing and Control 3 Model 1604-1607 Standard Rotating Shaft Torque Sensor Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell's standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer's sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. WARNING PERSONAL INJURY * DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. WARNING Find out more Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifica- MISUSE OF DOCUMENTATION * The information presented in this datasheet is for reference only. DO NOT USE this document as product installation information. * Complete installation, operation and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. tions, pricing or name of the nearest Authorized Distributor, contact your local sales office. To learn more about Honeywell's test and measurement products, call +1-614-850-5000, visit http://measurementsensors. honeywell.com, or e-mail inquiries to info.tm@honeywell.com Sensing and Control Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 USA honeywell.com 008778-2-EN IL50 GLO July 2014 Copyright (c) 2014 Honeywell International Inc. All rights reserved. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Honeywell: 1604-500 1605-5K 1604-1K 1604-2K 1605-10K 1604-200