
Product Specifications
Product Features
4275 Burton Drive
Santa Clara, CA 95054
tel: +1 408 567 3000
fax: +1 408 567 3001
www.ovt.com
OmniVision reserves the right to make changes to their products or to discontinue any
product or service without further notice. OmniVision, the OmniVision logo and
OmniPixel are registered trademarks of OmniVision Technologies, Inc. OmniPixel3-HS
is a trademark of OmniVision Technologies, Inc. All other trademarks are the property
of their respective owners.
version 14, October 2012
OV7960/OV7962
image sensor
core
image sensor
processor
image output
interface
VCON/VCOP
PAL/NTSC
COLOR/BW
image
array
row select
black level
calibration
timing generator and
system control logic
OSC PLL SPI master
interface SCCB slave interface
control register bank
digital gain
column
sample/hold gain
control
10-bit
ADC
AMP
DSP
DAC FIFO
DVP
encoder
HREF
PCLK
SCL
SDA
FSIN
PWDN
RESET_B
OVLEN
VSYNC
XI
XO
SCK
ESO
ESI
CS
video
input
VICK
Y[9:0]
VI_[7:0]
7960_7962_PB_1_1
Functional Block Diagram
OV7960/OV7962
array size
– NTSC: 656 x 492
– PAL: 768 x 576
– digital: 752 x 480 (OV7962)
power supply:
– core: 1.5V + 5%
– analog: 3.14V~3.47V
– I/O: 1.7 ~ 3.47V
power requirements:
– 225 mW (OV7960)
– 245 mW (OV7962)
– 20 μA (standby)
temperature range:
– operating: -40°C to 105°C
output formats:
–NTSC
–PAL
– digital (OV7962)
lens chief ray angle:
0° (no microlens shift)
sensitivity:
12 V/Lux-sec
Ordering Information
rear view/backup camera
360° view
adaptive cruise control
occupant sensor
black box, personal security
drive recorder
lane departure warning
blind spot detection
night vision with active illumination
packaged in an aCSP for the most
efficient package size
industry's best responsivity
(12V/lux-sec)
exceptional low-light performance
(0.01/lux)
VGA full array (OV7962)
parallel DVP interface
high sensitivity
color and b&w sensor options
automatic exposure/gain with 16
zone control
horizontal and vertical windowing
capability
auto white balance control
aperture/gamma control
external frame sync capability
(Genlock)
low power consumption
optical format:
– 1/3.6" for NTSC
– 1/3" for PAL
– 1/3.2” for digital (OV7962)
frame rate:
– NTSC: 60 fields/sec
– PAL: 50 fields/sec
– digital: 30 fps (OV7962)
shutter:
rolling shutter
max S/N ratio:
38 dB
dynamic range:
70 dB @ 8x gain
scan mode:
interlaced
dark current:
50 mV/s @ 60°C
junction temperature
pixel size:
6.0 μm x 6.0 μm
image area:
4752 μm x 3552 μm
package dimensions:
6.64 mm x 7.10 mm x 0.67 mm
slave compatible serial camera
control bus (SCCB) control
interface for register programming
(SCCB is I2C compatible)
extremely low dark current for high
temperature applications
50/60 Hz flicker cancellation
dynamic overlay with four layers, 16
colors and eight transparencies
each
SPI master for single static overlay
and loading setting
AEC-Q100 qualified
defective pixel correction
optimized for digital progressive
and analog applications
direct interface with in-car LCD
screens or devices with 75 Ohm
loading
Applications
OV07960-E62V-PF
(color, NTSC, lead-free) 62-pin aCSP™ with protective film
OV07960-E62T-RF
(color, NTSC, lead-free) 62-pin aCSP™ with protective film and Tape & Reel
OV07962-E62Y-PF
(color, digital, lead-free) 62-pin aCSP™ with protective film
OV07962-E62Y-RG
(color, digital, lead-free) 62-pin aCSP™
* Since it is impossible to check compatibility with all displays, check the interoperability before committing to
mass production
* Sensors with rolling shutter and high sensitivity can produce images with bandingunder certain fluorescent
lighting conditions.
** The sensor is qualified to AEC-Q100 grade-2 specifications.