OV7960 NTSC/PAL OV7962 NTSC/PAL/digital available in a lead-free package product brief Enabling Next-Generation Camera-Based Driver Assistance Applications The ultra-compact OV7960/OV7962 AutoVision solution packs a high level of functionality into the automotive industry's smallest package - up to 40 percent smaller than competing devices. Boasting the industry's best responsivity of 12V/lux-sec, the OV7960/OV7962 color sensor incorporates OmniVision's most advanced OmniPixel3-HSTM architecture, delivering superior low-light performance and higher dynamic range with the full functionality of a single-chip analog output sensor. Ideal for applications requiring a small footprint, low power, high performance video camera, the OV7960/ OV7962 is optimized for digital progressive and certain analog applications. The OV7960/OV7962 operates across a wide-temperature range, from -40C to +105C, meeting AEC-Q100 grade-2 requirements. Extra pixels allow users to adjust the camera setup by moving the active area of the image in both vertical and horizontal directions. This feature is especially useful in fine tuning the viewing window to compensate for mechanical misalignments. A new feature in the OV7960/OV7962 allows the sensor to output digital interlaced or progressive YUV data into an external image processor, providing additional processing, such as distortion correction while still meeting NTSC/PAL system requirements. Find out more at www.ovt.com/automotive OV7960/OV7962 Applications rear view/backup camera 360 view adaptive cruise control Ordering Information occupant sensor black box, personal security OV07960-E62V-PF (color, NTSC, lead-free) 62-pin aCSPTM with protective film drive recorder OV07960-E62T-RF (color, NTSC, lead-free) 62-pin aCSPTM with protective film and Tape & Reel lane departure warning blind spot detection OV07962-E62Y-PF (color, digital, lead-free) 62-pin aCSPTM with protective film night vision with active illumination OV07962-E62Y-RG (color, digital, lead-free) 62-pin aCSPTM Product Specifications Product Features packaged in an aCSP for the most efficient package size array size slave compatible serial camera control bus (SCCB) control interface for register programming (SCCB is I2C compatible) industry's best responsivity (12V/lux-sec) exceptional low-light performance (0.01/lux) VGA full array (OV7962) extremely low dark current for high temperature applications power supply: 50/60 Hz flicker cancellation high sensitivity color and b&w sensor options SPI master for single static overlay and loading setting automatic exposure/gain with 16 zone control AEC-Q100 qualified power requirements: - 225 mW (OV7960) - 245 mW (OV7962) - 20 A (standby) temperature range: defective pixel correction horizontal and vertical windowing capability - operating: -40C to 105C output formats: optimized for digital progressive and analog applications auto white balance control - NTSC - PAL - digital (OV7962) direct interface with in-car LCD screens or devices with 75 Ohm loading aperture/gamma control external frame sync capability (Genlock) - 1/3.6" for NTSC - 1/3" for PAL - 1/3.2" for digital (OV7962) frame rate: - core: 1.5V + 5% - analog: 3.14V~3.47V - I/O: 1.7 ~ 3.47V dynamic overlay with four layers, 16 colors and eight transparencies each parallel DVP interface optical format: - NTSC: 656 x 492 - PAL: 768 x 576 - digital: 752 x 480 (OV7962) lens chief ray angle: 0 (no microlens shift) - NTSC: 60 fields/sec - PAL: 50 fields/sec - digital: 30 fps (OV7962) shutter: rolling shutter max S/N ratio: 38 dB dynamic range: 70 dB @ 8x gain scan mode: interlaced dark current: 50 mV/s @ 60C junction temperature pixel size: 6.0 m x 6.0 m image area: 4752 m x 3552 m package dimensions: 6.64 mm x 7.10 mm x 0.67 mm sensitivity: 12 V/Lux-sec low power consumption * Since it is impossible to check compatibility with all displays, check the interoperability before committing to mass production * Sensors with rolling shutter and high sensitivity can produce images with bandingunder certain fluorescent lighting conditions. ** The sensor is qualified to AEC-Q100 grade-2 specifications. Functional Block Diagram OV7960/OV7962 DVP FIFO DAC gain control image output interface encoder column sample/hold 10-bit ADC DSP AMP digital gain image array image sensor processor black level calibration row select image sensor core Y[9:0] VCON/VCOP PAL/NTSC COLOR/BW SPI master interface video input VICK VI_[7:0] PLL SCCB slave interface SCL SDA timing generator and system control logic ESI CS SCK ESO XI XO OSC PWDN RESET_B OVLEN FSIN VSYNC HREF PCLK control register bank 7960_7962_PB_1_1 4275 Burton Drive Santa Clara, CA 95054 version 14, October 2012 tel: +1 408 567 3000 fax: +1 408 567 3001 www.ovt.com OmniVision reserves the right to make changes to their products or to discontinue any product or service without further notice. OmniVision, the OmniVision logo and OmniPixel are registered trademarks of OmniVision Technologies, Inc. OmniPixel3-HS is a trademark of OmniVision Technologies, Inc. All other trademarks are the property of their respective owners.