STP12NM50FD-STP12NM50FDFP-STW14NM50FD STB12NM50FD - STB12NM50FD-1 N-CHANNEL500V-0.32-12ATO-220/FP/D2PAK/I2PAK/TO-247 FDmesh Power MOSFET (with FAST DIODE) TYPE STP12NM50FD STP12NM50FDFP STB12NM50FD STB12NM50FD-1 STW14NM50FD VDSS R DS(on) 500 500 500 500 500 < < < < < V V V V V 0.4 0.4 0.4 0.4 0.4 ID 12 12 12 12 14 A A A A A Pw 160 W 35 W 160 W 160 W 175 W TYPICAL RDS(on) = 0.32 HIGH dv/dt AND AVALANCHE CAPABILITIES 100% AVALANCHE TESTED LOW INPUT CAPACITANCE AND GATE CHARGE LOW GATE INPUT RESISTANCE TIGHT PROCESS CONTROL AND HIGH MANUFACTURING YIELDS DESCRIPTION The FDmesh associates all advantages of reduced on-resistance and fast switching with an intrinsic fast-recovery body diode. It is therefore strongly recommended for bridge topologies, in particular ZVS phase-shift converters. 3 2 1 3 2 TO-220 1 TO-220FP TO-247 3 I2PAK 1 3 12 D 2PAK INTERNAL SCHEMATIC DIAGRAM APPLICATIONS ZVS PHASE-SHIFT FULL BRIDGE CONVERTERS FOR SMPS AND WELDING EQUIPMENT ORDERING INFORMATION SALES TYPE MARKING PACKAGE PACKAGING STP12NM50FD P12NM50FD TO-220 TUBE STP12NM50FDFP P12NM50FDFP TO-220FP TUBE STB12NM50FD B12NM50FD D 2PAK TUBE STB12NM50FDT4 B12NM50FD D 2PAK TAPE & REEL STB12NM50FD-1 B12NM50FD I2PAK TUBE STW14NM50FD W14NM50FD TO-247 TUBE June 2002 1/14 STP12NM50FD / STP12NM50FDFP / STB12NM50FD / STB12NM50FD-1 / STW14NM50FD ABSOLUTE MAXIMUM RATINGS Symbol Parameter Value TO-220 / D2PAK / I2PAK VDS VDGR VGS Unit TO-220FP TO-247 Drain-source Voltage (VGS = 0) 500 V Drain-gate Voltage (RGS = 20 k) 500 V 30 Gate- source Voltage V ID Drain Current (continuous) at TC = 25C 12 12 (*) 14 A ID Drain Current (continuous) at TC = 100C 7.5 7.5 (*) 8.8 A Drain Current (pulsed) 48 48 (*) 56 A IDM (l ) PTOT dv/dt (1) Total Dissipation at TC = 25C 160 35 175 W Derating Factor 1.28 0.28 1.4 W/C Peak Diode Recovery voltage slope VISO Insulation Withstand Voltage (DC) Tj Tstg Operating Junction Temperature Storage Temperature 20 - V/ns 2500 V C C - 65 to 150 - 65 to 150 ( l ) Pulse width limi ted by safe operating area (1) ISD 12A, di/dt 400 A, VDD V(BR)DSS, Tj TJMAX. (*) Limited only by maximum temperature allowed THERMAL DATA TO-220 I2PAK Rthj-case Rthj-pcb Thermal Resistance Junction-case Max Thermal Resistance Junction-pcb Max D 2PAK TO-220FP TO-247 3.57 0.715 0.78 C/W C/W 30 (When mounted on minimum Footprint) Rthj-amb Tl Thermal Resistance Junction-ambient Max Maximum Lead Temperature For Soldering Purpose 62.5 30 C/W C 300 AVALANCHE CHARACTERISTICS Symbol 2/14 Parameter IAR Avalanche Current, Repetitive or Not-Repetitive (pulse width limited by Tj max) EAS Single Pulse Avalanche Energy (starting Tj = 25 C, ID = IAR, VDD = 50 V) Max Value Unit 6 A 400 mJ STP12NM50FD / STP12NM50FDFP / STB12NM50FD / STB12NM50FD-1 / STW14NM50FD ELECTRICAL CHARACTERISTICS (TCASE =25C UNLESS OTHERWISE SPECIFIED) ON/OFF Symbol V(BR)DSS Parameter Test Conditions Drain-source Breakdown Voltage ID = 1 mA, VGS = 0 IDSS Zero Gate Voltage Drain Current (V GS = 0) VDS = Max Rating VDS = Max Rating, TC = 125 C IGSS Gate-body Leakage Current (VDS = 0) VGS = 30V VGS(th) Gate Threshold Voltage VDS = VGS, ID = 250A R DS(on) Static Drain-source On Resistance VGS = 10V, ID = 6A Min. Typ. Max. 500 3 Unit V 1 10 A A 100 nA 4 5 V 0.32 0.4 Typ. Max. Unit DYNAMIC Symbol gfs (1) Parameter Test Conditions Forward Transconductance VDS = 15 V, ID = 6 A C iss Coss Crss Input Capacitance Output Capacitance Reverse Transfer Capacitance VDS = 25V, f = 1 MHz, VGS = 0 RG Gate Input Resistance f=1 MHz Gate DC Bias = 0 Test Signal Level = 20mV Open Drain Min. 9.8 S 1027 205 24 pF pF pF 3.7 SWITCHING ON Symbol Parameter Test Conditions td(on) tr Turn-on Delay Time Rise Time VDD = 250 V, ID = 6 A RG = 4.7 VGS = 10 V (Resistive Load see, Figure 3) Qg Qgs Q gd Total Gate Charge Gate-Source Charge Gate-Drain Charge VDD = 400V, I D = 12 A, VGS = 10V Min. Typ. Max. 19 10 Unit ns ns 27.5 8 12 38.5 nC nC nC Typ. Max. Unit SWITCHING OFF Symbol tr(Voff) tf tc Parameter Off-voltage Rise Time Fall Time Cross-over Time Test Condition s Min. VDD = 400 V, I D = 12 A, R G = 4.7, VGS = 10V (Inductive Load see, Figure 5) 39 18 29 ns ns ns SOURCE DRAIN DIODE Symbol Parameter ISD ISDM (2) Source-drain Current Source-drain Current (pulsed) VSD (1) Forward On Voltage ISD = 12 A, V GS = 0 Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current ISD = 12 A, di/dt = 100A/s VDD = 30V, Tj = 150C (see test circuit, Figure 5) trr Qrr IRRM Test Conditions Min. Typ. 224 1.3 12 Max. Unit 12 48 A A 1.5 V ns C A Note: 1. Pulsed: Pulse duration = 300 s, duty cycle 1.5 %. 2. Pulse width limited by safe operating area. 3/14 STP12NM50FD / STP12NM50FDFP / STB12NM50FD / STB12NM50FD-1 / STW14NM50FD Safe Operating Area For TO-220/D2PAK/I2PAK Thermal Impedance For TO-220/D2PAK/I2PAK Safe Operating Area For TO-220FP Thermal Impedance For TO-220FP Safe Operating Area For TO-247 Thermal Impedance For TO-247 4/14 STP12NM50FD / STP12NM50FDFP / STB12NM50FD / STB12NM50FD-1 / STW14NM50FD Output Characteristics Transfer Characteristics Transconductance Static Drain-source On Resistance Gate Charge vs Gate-source Voltage Capacitance Variations 5/14 STP12NM50FD / STP12NM50FDFP / STB12NM50FD / STB12NM50FD-1 / STW14NM50FD Normalized Gate Threshold Voltage vs Temp. Normalized On Resistance vs Temperature Source-drain Diode Forward Characteristics Normalized BVDSS vs Temperature 6/14 STP12NM50FD / STP12NM50FDFP / STB12NM50FD / STB12NM50FD-1 / STW14NM50FD Fig. 1: Unclamped Inductive Load Test Circuit Fig. 2: Unclamped Inductive Waveform Fig. 3: Switching Times Test Circuit For Resistive Load Fig. 4: Gate Charge test Circuit Fig. 5: Test Circuit For Inductive Load Switching And Diode Recovery Times 7/14 STP12NM50FD / STP12NM50FDFP / STB12NM50FD / STB12NM50FD-1 / STW14NM50FD TO-220 MECHANICAL DATA mm DIM. MIN. inch TYP. MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 C 1.23 1.32 0.048 0.051 D 2.40 2.72 0.094 D1 0.107 1.27 0.050 E 0.49 0.70 0.019 F 0.61 0.88 0.024 0.027 0.034 F1 1.14 1.70 0.044 0.067 F2 1.14 1.70 0.044 0.067 G 4.95 5.15 0.194 0.203 0.106 G1 2.4 2.7 0.094 H2 10.0 10.40 0.393 L2 0.409 16.4 0.645 13.0 14.0 0.511 0.551 L5 2.65 2.95 0.104 0.116 L6 15.25 15.75 0.600 0.620 L7 6.2 6.6 0.244 0.260 L9 3.5 3.93 0.137 0.154 DIA. 3.75 3.85 0.147 0.151 D1 C D A E L4 H2 G G1 F1 L2 F2 F Dia. L5 L9 L7 L6 8/14 L4 P011C STP12NM50FD / STP12NM50FDFP / STB12NM50FD / STB12NM50FD-1 / STW14NM50FD TO-220FP MECHANICAL DATA mm. DIM. MIN. inch MAX. MIN. 4.6 0.173 0.181 2.5 2.7 0.098 0.106 2.5 2.75 0.098 0.108 E 0.45 0.7 0.017 0.027 F 0.75 1 0.030 0.039 F1 1.15 1.7 0.045 0.067 A 4.4 B D TYP TYP. MAX. F2 1.15 1.7 0.045 0.067 G 4.95 5.2 0.195 0.204 G1 2.4 2.7 0.094 0.106 H 10 10.4 0.393 L2 0.409 16 0.630 28.6 30.6 1.126 1.204 L4 9.8 10.6 .0385 0.417 L5 2.9 3.6 0.114 0.141 L6 15.9 16.4 0.626 0.645 L7 9 9.3 0.354 0.366 O 3 3.2 0.118 0.126 B D A E L3 L3 L6 F F1 L7 F2 H G G1 1 2 3 L5 L2 L4 9/14 STP12NM50FD / STP12NM50FDFP / STB12NM50FD / STB12NM50FD-1 / STW14NM50FD D2PAK MECHANICAL DATA mm. inch DIM. MIN. TYP MAX. MIN. TYP. MAX. A 4.4 4.6 0.173 0.181 A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.7 0.93 0.027 0.036 B2 1.14 1.7 0.044 0.067 C 0.45 0.6 0.017 0.023 C2 1.23 1.36 0.048 0.053 D 8.95 9.35 0.352 0.368 D1 E 8 0.315 10 E1 10.4 0.393 8.5 0.334 G 4.88 5.28 0.192 0.208 L 15 15.85 0.590 0.625 L2 1.27 1.4 0.050 0.055 L3 1.4 1.75 0.055 0.068 M 2.4 3.2 0.094 0.126 R 0.015 0 8 3 V2 0.4 10/14 1 STP12NM50FD / STP12NM50FDFP / STB12NM50FD / STB12NM50FD-1 / STW14NM50FD TO-262 (I2PAK) MECHANICAL DATA mm DIM. MIN. inch TYP. MAX. MIN. TYP. MAX. 4.4 4.6 0.173 0.181 A1 2.49 2.69 0.098 0.106 B 0.7 0.93 0.027 0.036 B2 1.14 1.7 0.044 0.067 C 0.45 0.6 0.017 0.023 C2 1.23 1.36 0.048 0.053 D 8.95 9.35 0.352 0.368 e 2.4 2.7 0.094 0.106 E 10 10.4 0.393 0.409 L 13.1 13.6 0.515 0.531 L1 3.48 3.78 0.137 0.149 L2 1.27 1.4 0.050 0.055 E e B B2 C2 A1 A C A L1 L2 D L P011P5/E 11/14 STP12NM50FD / STP12NM50FDFP / STB12NM50FD / STB12NM50FD-1 / STW14NM50FD TO-247 MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 4.7 5.3 0.185 0.209 D 2.2 2.6 0.087 0.102 E 0.4 0.8 0.016 0.031 F 1 1.4 0.039 0.055 F3 2 2.4 0.079 0.094 F4 3 3.4 0.118 G 10.9 0.134 0.429 H 15.3 15.9 0.602 0.626 L 19.7 20.3 0.776 0.779 L3 14.2 14.8 0.559 0.582 L4 34.6 1.362 L5 5.5 0.217 M 2 3 0.079 0.118 P025P 12/14 STP12NM50FD / STP12NM50FDFP / STB12NM50FD / STB12NM50FD-1 / STW14NM50FD D2PAK FOOTPRINT TUBE SHIPMENT (no suffix)* TAPE AND REEL SHIPMENT (suffix "T4")* REEL MECHANICAL DATA DIM. mm MIN. A B C TAPE MECHANICAL DATA mm MIN. MAX. inch MIN. MAX. A0 10.5 10.7 0.413 0.421 B0 15.7 15.9 0.618 0.626 D D1 1.5 1.59 1.6 1.61 0.059 0.063 0.062 0.063 E F 1.65 11.4 1.85 11.6 0.065 0.073 0.449 0.456 K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.161 P1 P2 11.9 1.9 12.1 2.1 0.468 0.476 0.075 0.082 R T 50 0.25 1.574 0.35 0.0098 0.0137 W 23.7 24.3 DIM. 1.5 12.8 D 20.2 G 24.4 N T 100 MAX. 330 inch MIN. MAX. 12.992 13.2 0.059 0.504 0.520 26.4 0.960 1.039 0795 3.937 30.4 1.197 BASE QTY BULK QTY 1000 1000 0.933 0.956 * on sales type 13/14 STP12NM50FD / STP12NM50FDFP / STB12NM50FD / STB12NM50FD-1 / STW14NM50FD Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics 2002 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - United States. http://www.st.com 14/14