SMT POWER INDUCTORS E & E Magnetic Products Limited Drum Type, UIS5010HC Series, Self-Leaded Suitable for DC/DC conversions in notebook computers, SCHEMATICS or other portable handheld devices. High performance and small size for surface mounting applications Unshielded and self-leaded design for pick and place handling Inductance range from 0.78 to 1000 micro H RoHS compliant versions are available ELECTRICAL SPECIFICATION @ 25C Part Number RoHS Part Number Inductance L (uH 20%) DCR (m) Max SRF (MHz) Typ Isat (A) 1 2 Irms (A) 3 Marking (XYYY) UIS5010HCM-781 UIS5010HCM-781F 0.78 2.6 156 30 15 M781 UIS5010HCM-152 UIS5010HCM-152F 1.5 4.0 100 25 15 M152 UIS5010HCM-222 UIS5010HCM-222F 2.2 6.1 75 20 12 M222 UIS5010HCM-332 UIS5010HCM-332F 3.3 8.6 60 17 10 M332 UIS5010HCM-392 UIS5010HCM-392F 3.9 10 55 15 9 M392 UIS5010HCM-472 UIS5010HCM-472F 4.7 14 40 13 8.4 M472 UIS5010HCM-602 UIS5010HCM-602F 6.0 17 35 12 7.5 M602 UIS5010HCM-782 UIS5010HCM-782F 7.8 18 35 11 7.5 M782 UIS5010HCM-103 UIS5010HCM-103F 10 26 28 10 6.0 M103 UIS5010HCM-123 UIS5010HCM-123F 12 28 26 8.5 5.2 M123 UIS5010HCM-153 UIS5010HCM-153F 15 32 20 8.0 4.4 M153 UIS5010HCM-223 UIS5010HCM-223F 22 47 20 7.0 3.5 M223 UIS5010HCM-333 UIS5010HCM-333F 33 66 15 5.5 3.0 M333 UIS5010HCM-473 UIS5010HCM-473F 47 86 9 4.5 2.6 M473 UIS5010HCM-683 UIS5010HCM-683F 68 130 8 3.5 2.3 M683 UIS5010HCM-104 UIS5010HCM-104F 100 190 7 3.0 1.8 M104 UIS5010HCM-154 UIS5010HCM-154F 150 250 6 2.6 1.5 M154 UIS5010HCM-224 UIS5010HCM-224F 220 380 5 2.4 1.2 M224 UIS5010HCM-334 UIS5010HCM-334F 330 560 4 1.9 1.0 M334 UIS5010HCM-474 UIS5010HCM-474F 470 850 3 1.4 0.82 M474 UIS5010HCM-684 UIS5010HCM-684F 680 1100 2.5 1.2 0.72 M684 UIS5010HCM-105 UIS5010HCM-105F 1000 1800 2 1.0 0.56 M105 Notes: 1. Inductance is tested at 100kHz, 0.1Vrms. 2. DC current at which the inductance drops 10% typical from its value without current. 3. Average current for a 40C rise above 25C ambient. 4. Operating temperature range: -40C to +85C. 5. Contact EEMPL for RoHS compliant version availability. 6. The part temperature (ambient temperature + temperature rise) should not exceed the upper limit of the operating temperature under worst case operating conditions. Circuit design, component placement, PWB trace size and thickness, airflow and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application. 2/F Block A, 94 Tokwawan Road, Kowloon, Hong Kong 1 Tel: (852) 2765 3888 Fax: (852) 2954 3304 PI107(01) Revised in 06/07 SMT POWER INDUCTORS E & E Magnetic Products Limited Drum Type, UIS5010HC Series, Self-Leaded MECHANICAL DIMENSIONS .730 Max 18.54 (DATE) XYYY (DATE) .600 15.24 Max E&E Part Number Height (Max) For M781 to M153 .315 8.00 For M223 to M683 .300 7.62 For M104 to M105 .280 7.11 .551 14.00 .710 18.03 Max .250 6.35 .500.010 12.700.25 Height Recommended Pad Layout Reference or Gauge Plane .065 Max 1.65 .075 1.90 .580 Max 14.73 .200 Max 5.08 Notes: inches 7. All dimensions are specified in mm with higher precedence in mm. 8. Unless otherwise specified, all tolerances are .010 . 0.25 9. For available RoHS part number, the part will be marked with "XYYYF", instead of "XYYY". Weight (in gram) : 5 typ. Tape & Reel : 250 / reel SCHEMATICS 1 2 FOR MORE INFORMATION, PLEASE CONTACT HEADQUARTER 2/F Block A, Merit Industrial Centre, 94 Tokwawan Road, Kowloon, Hong Kong Tel: (852) 2765 3888 Fax: (852) 2954 3304 Email: eempl@eleceltek.com Website: http://www.eleceltek.com Information herein is for reference only and subject to change without notice. It does not constitute any representation, warranty or commitment of the company in respect of the products in any aspect. All logos, brands and product names mentioned herein are trademarks or registered trademarks of their respective owners. The company does not assume any liability arising out of the application or use of any product or circuit described herein. Copyrights 2006, E & E Magnetic Products Limited. 2/F Block A, 94 Tokwawan Road, Kowloon, Hong Kong 2 Tel: (852) 2765 3888 Fax: (852) 2954 3304 PI107(01) Revised in 06/07