C20ALGR5470AASK - KEMET Electronics Corporation

One WORLD One Brand One Strategy One Focus One Team One KEMET

Benets

• Overpressure safety device

• High peak current capability

• High torque screw terminals with plastic insulator

• Long lifetime

• Self-healing

Overview

Polypropylene metallized lm with cylindrical aluminium can type

lled with oil, screw terminals, plastic insulator and overpressure

safety device.

Applications

Typical applications include commutation, power factor correction

and AC harmonic ltering.

Radial Aluminum and Plastic Case Power Film Capacitors

C44P/C20A, 250 – 1,000 VAC, 400 – 1,400 VDC,

for PFC and AC Filter

Part Number Decoding

C44 PFG R 6 2 2 0 Z A 0 J

Series Series Application Rated Voltage (VAC) Case Type Terminal Style Capacitance Code (pF) Internal

Code

Internal

Code

Internal

Code Tolerance

MKP

Capacitors

for Power

Applications

44 =

250 – 440

Vrms

20 =

550 – 1,000

Vrms

AC Filter

P = C44

A = C20

For C44P

F = 25

L = 330

K = 440

For C20A

K = 550

L = 640

Q = 780

Z = 1,000

G =

with M12

bolt

R= Male M10 Digits 9, 10, & 11

indicate the rst 3

digits of capacitance

value. Digit 8

indicates the number

of zeros that must be

added to obtain rated

capacitance in pF.

A =

Standard

Z =

Special

J = 5%

K = 10%

Mechanical Data

P (Terminals Pitch) 28 mm for D = 65 mm

35 mm for D ≥ 75 mm

Maximum Driving Torque 10 Nm

Creepage Distance > 10 mm

Clearance in Air > 10 mm

Insulation Group D

P±1

Ø20 +0.5

M10

24 ±1

43 ±2

(Ø+4) ±0.5

M12

16 ±0.5

Ø±0.5

Power and AC Film Capacitors

Radial Aluminum and Plastic Case Power Film Capacitors – C44P/C20A, 250 – 1,000 VAC, 400 – 1,400 VDC, for PFC and AC Filter

Qualication

Reference Standards EIC 61071

Application Class (DIN 40040) HSF/LR

Performance Characteristics

Reference Standards IEC 1071, EN 61071, VDE 0560–12

Application Class (DIN 40040) HSF/LR according to DIN 40040

Temperature Range (Case) -25 to + 70°C

Temperature Storage -55 to + 85°C

Maximum Permissible Ambient Temperature +70°C

Capacitance Tolerance Code (15th Digit) J = ± 5%, K = ± 10%

Test Voltage Terminal to Terminal (VTT) 2.15 VRMS for 10 seconds at 25°C

Test Voltage Terminal to Case (V

) 4 kV – 50 Hz for 60 seconds

Rated Insulation Voltage Vi 3,600 VAC for 10 seconds at 25°C for Vrms < 600 VAC

Insulation Resistance ≥ 10,000 MΩ x μF

Dissipation Factor (tgδ) ≤ 3 x 10-4 (Vn, 50 Hz)

Acceptable Relative Humidity

Annual average ≤ 70%

≤ 85% for ≤ 30 intermittent days annually

Dewing not admissible

IEC Climatic Category 25/70/56 according to IEC 68–1

Degree of Protection IP00

Capacitance Deviation in the Operating

Temperature Range of -40 to +70°C ±1.5% maximum on capacitance value measured at +20°C

Change of Capacitance vs. Operating Time -3% after 100,000 hours at Vrms

Terminations Plastic insulator with screw terminals M10

Installation Space for safety device ≥ 15 mm

Life Expectancy ≥ 100,000 hours at Vrms

Failure Quota 300/109 components per hour

Power and AC Film Capacitors

Radial Aluminum and Plastic Case Power Film Capacitors – C44P/C20A, 250 – 1,000 VAC, 400 – 1,400 VDC, for PFC and AC Filter

Table 1 – Ratings & Part Number Reference

VDC VAC Cap Value

(µF)

Dimensions (mm) Vpk

VDC Ipkr

AIrms

AWeight

(kg) Part Number

D H P

400 250 300 75 268 35 600 3000 60 1.2 C44PFGR6300ZA0J

400 250 400 85 268 35 600 4000 65 1.7 C44PFGR6400ZA0J

400 250 500 85 268 35 600 5000 65 1.7 C44PFGR6500AA0J

400 250 600 95 280 35 600 6000 65 2.1 C44PFGR6600AA0J

500 330 100 65 115 28 700 1500 25 0.5 C44PLGR6100AASJ

500 330 200 65 145 28 700 3000 43 0.6 C44PLGR6200ZASJ

500 330 300 65 247 28 700 4500 50 0.8 C44PLGR6300ZASJ

500 330 400 65 247 28 700 6000 50 1C44PLGR6400ZASJ

500 330 500 75 247 35 700 7500 58 1.2 C44PLGR6500ZASJ

500 330 600 85 270 35 700 9000 70 1.3 C44PLGR6600ZASJ

750 440 100 75 147 35 940 2000 30 0.7 C44PKGR6100AASJ

750 440 133 65 247 28 940 3000 40 0.8 C44PKGR6133AASJ

750 440 150 65 247 28 940 3000 45 1C44PKGR6150AASJ

750 440 200 75 247 35 940 4000 55 1.2 C44PKGR6200AASJ

750 440 300 85 247 35 940 4000 60 1.6 C44PKGR6300AASJ

750 550 22 65 117 28 940 1540 40 0.4 C20AKGR5220AASK

750 550 33 75 117 35 940 2310 45 0.5 C20AKGR5330AASK

750 550 47 65 247 28 940 3290 50 0.8 C20AKGR5470AASK

750 550 68 65 247 28 940 4760 55 1C20AKGR5680AASK

750 550 100 75 247 35 940 7000 60 1.5 C20AKGR6100AASK

750 550 120 85 247 35 940 8400 60 2C20AKGR6120AASK

750 550 150 95 247 35 940 10500 60 2.3 C20AKGR6150AASK

900 640 15 65 117 28 1130 1350 45 0.4 C20ALGR5150AASK

900 640 22 75 147 35 1130 1980 45 0.5 C20ALGR5220AASK

900 640 33 75 147 35 1130 2970 50 0.8 C20ALGR5330AASK

900 640 47 65 247 28 1130 4230 55 1C20ALGR5470AASK

900 640 68 75 247 35 1130 6120 60 1.5 C20ALGR5680AASK

900 640 100 95 247 35 1130 9000 60 2.3 C20ALGR6100AASK

900 640 120 95 280 35 1130 10800 60 2.5 C20ALGR6120AASK

900 640 150 116 280 35 1130 13500 60 3C20ALGR6150AASK

1100 780 10 65 147 28 1380 1000 30 0.4 C20AQGR5100AASK

1100 780 15 75 147 35 1380 1500 45 0.5 C20AQGR5150AASK

1100 780 22 75 147 35 1380 2200 45 0.8 C20AQGR5220AASK

1100 780 33 85 147 35 1380 3300 50 1.2 C20AQGR5330AASK

1100 780 47 75 247 35 1380 4700 55 1.5 C20AQGR5470AASK

1100 780 68 85 247 35 1380 6800 60 2C20AQGR5680AASK

1100 780 100 95 280 35 1380 10000 60 2.5 C20AQGR6100AASK

1000 1400 10 65 147 28 1700 1000 25 0.56 C20AZGR5100AASK

1000 1400 15 75 147 35 1700 1500 33 0.75 C20AZGR5150AASK

1000 1400 22 75 147 35 1700 2200 35 0.75 C20AZGR5220AASK

1000 1400 33 75 247 35 1700 3300 40 1.25 C20AZGR5330AASK

1000 1400 47 85 247 35 1700 4700 45 1.65 C20AZGR5470AASK

1000 1400 68 95 247 35 1700 6800 55 2C20AZGR5680AASK

VDC VAC Cap Value (µF) D (mm) H (mm) P (mm) Vpk VDC I

pkr

A I

rms

A Weight (kg) Part Number

Roll Over for

Order Info.

Power and AC Film Capacitors

Radial Aluminum and Plastic Case Power Film Capacitors – C44P/C20A, 250 – 1,000 VAC, 400 – 1,400 VDC, for PFC and AC Filter

Environmental Compliance

As an environmentally conscious company, KEMET is working continuously with improvements concerning the environmental effects of

both our capacitors and their production.

In Europe (RoHS Directive) and in some other geographical areas like China, legislation has been put in place to prevent the use of

some hazardous materials, like Lead (Pb), in electronic equipment. All products in this catalog are produced to help our customers'

obligations to guarantee their products to fulll these legislative requirements. The only material of concern in our products has

been Lead (Pb), which has been removed from all designs to fulll the requirement of containing less than 0.1% of Lead in any

homogeneous material.

KEMET will closely follow any changes in legislation world wide and makes any necessary changes in its products, whenever needed.

Some customer segments like Medical, Military and Automotive Electronics may still require the use of Lead in electrode coatings. To

clarify the situation and distinguish products from each other, a special symbol is used on the packaging labels for RoHS compatible

capacitors.

Because of customer requirements there may appear additional markings like LF = Lead Free or LFW = Lead Free Wires on the label.

All KEMET power lm products are RoHS Compliant.

Materials & Environment

The selection of materials used by KEMET for the production of capacitors is the result of extensive experience and constant attention

to environmental protection. KEMET selects its suppliers according to ISO 9001 standards and carries out statistical analysis on the

materials purchased before acceptance. All materials are, to the company's present knowledge, non-toxic and free from Cadmium,

Mercury, Chrome and compounds, PCB (Polychlorine Triphenyl), Bromide and Chlorine Dioxins Bromurate Clorurate, CFC and HCFC

and Asbestos.

Insulation Resistance

When the capacitor temperature increases, the insulation resistance decreases. This is due to increased electron activity. Low

insulation resistance can also be the result of moisture trapped in the windings, caused by a prolonged exposure to excessive

humidity.

Dissipation Factor

Dissipation factor is a complex function involved with the inefciency of the capacitor. The tgδ may change up and down with increased

temperature. For more information, please refer to Performance Characteristics.

Power and AC Film Capacitors

Radial Aluminum and Plastic Case Power Film Capacitors – C44P/C20A, 250 – 1,000 VAC, 400 – 1,400 VDC, for PFC and AC Filter

Hermetically Sealed Capacitors

When the temperature increases, the pressure inside the capacitor increases. If the internal pressure is high enough, it can cause a

breach in the capacitor which can result in leakage, impregnation, lling uid or moisture susceptibility.

Resin Encased/Wrap & Fill Capacitors

The resin seals on resin encased and wrap and ll capacitors will withstand short-term exposure to high humidity environments without

degradation. Resins and plastic tapes will form a pseudo-impervious barrier to humidity and chemicals. These case materials are

somewhat porous and through osmosis can cause contaminants to enter the capacitor. The second area of contaminated absorption

is the lead-wire/resin interface. Since resins cannot bond 100% to tinned wires, there can be a path formed up to the lead wire into the

capacitor section. Aqueous cleaning of circuit boards can aggravate this condition.

Barometric Pressure

The altitude at which hermetically sealed capacitors are operated controls the voltage rating of the capacitor. As the barometric

pressure decreases, the susceptibility to terminal arc-over increases. Non-hermetic capacitors can be affected by internal stresses due

to pressure changes. This can be in the form of capacitance changes or dielectric arc-over as well as low insulation resistance. Heat

transfer can also be affected by altitude operation. Heat generated in operation cannot be dissipated properly and can result in high RI2

losses and eventual failure.

Radiation

Radiation capabilities of capacitors must be taken into consideration. Electrical degradation in the form of dielectric embitterment can

take place causing shorts or opens.

Power and AC Film Capacitors

Radial Aluminum and Plastic Case Power Film Capacitors – C44P/C20A, 250 – 1,000 VAC, 400 – 1,400 VDC, for PFC and AC Filter

KEMET Corporation

World Headquarters

2835 KEMET Way

Simpsonville, SC 29681

Mailing Address:

P.O. Box 5928

Greenville, SC 29606

www.kemet.com

Tel: 864-963-6300

Fax: 864-963-6521

Corporate Of ces

Fort Lauderdale, FL

Tel: 954-766-2800

North America

Southeast

Lake Mary, FL

Tel: 407-855-8886

Northeast

Wilmington, MA

Tel: 978-658-1663

West Chester, PA

Tel: 610-692-4642

Central

Novi, MI

Tel: 248-994-1030

Carmel, IN

Tel: 317-706-6742

West

Milpitas, CA

Tel: 408-433-9950

Mexico

Zapopan, Jalisco

Tel: 52-33-3123-2141

Europe

Southern Europe

Geneva, Switzerland

Tel: 41-22-715-0100

Paris, France

Tel: 33-1-4646-1009

Sasso Marconi, Italy

Tel: 39 -051-939111

Milan, Italy

Tel: 39-02-57518176

Rome, Italy

Tel: 39-06-23231718

Madrid, Spain

Tel: 34-91-804-4303

Central Europe

Landsberg, Germany

Tel: 49-8191-3350800

Dortmund, Germany

Tel: 49-2307-3619672

Kwidzyn, Poland

Tel: 48-55-279-7025

Northern Europe

Bishop’s Stortford, United Kingdom

Tel: 44-1279-757201

Weymouth, United Kingdom

Tel: 44-1305-830747

Coatbridge, Scotland

Tel: 44-1236-434455

Färjestaden, Sweden

Tel: 46-485-563934

Espoo, Finland

Tel: 358-9-5406-5000

Asia

Northeast Asia

Hong Kong

Tel: 852-2305-1168

Shenzhen, China

Tel: 86-755-2518-1306

Beijing, China

Tel: 86-10-5829-1711

Shanghai, China

Tel: 86-21-6447-0707

Taipei, Taiwan

Tel: 886-2-27528585

Southeast Asia

Singapore

Tel: 65-6586-1900

Penang, Malaysia

Tel: 60-4-6430200

Bangalore, India

Tel: 91-806-53-76817

Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not

assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of

KEMET Electronics Corporation.

Power and AC Film Capacitors

Radial Aluminum and Plastic Case Power Film Capacitors – C44P/C20A, 250 – 1,000 VAC, 400 – 1,400 VDC, for PFC and AC Filter

Other Kemet Resources

Tools

Resource Location

Con gure A Part: CapEdge http://capacitoredge.kemet.com

SPICE & FIT Software http://www.kemet.com/spice

Search Our FAQs: KnowledgeEdge http://www.kemet.com/keask

Product Information

Resource Location

Products http://www.kemet.com/products

Technical Resources (Including Soldering Techniques) http://www.kemet.com/technicalpapers

RoHS Statement http://www.kemet.com/rohs

Quality Documents http://www.kemet.com/qualitydocuments

Product Request

Resource Location

Sample Request http://www.kemet.com/sample

Engineering Kit Request http://www.kemet.com/kits

Contact

Resource Location

Website www.kemet.com

Investor Relations http://www.kemet.com/ir

Call Us 1-877-MyKEMET

Twitter http://twitter.com/kemetcapacitors

Disclaimer

All product speci cations, statements, information and data (collectively, the “Information”) are subject to change without notice.

All Information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.

Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we

speci cally disclaim – any warranty concerning suitability for a speci c customer application or use. This Information is intended for use only by customers who have the requisite

experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the

use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.

Although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur.

Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or

redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.

Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not

be required.

Power and AC Film Capacitors

Radial Aluminum and Plastic Case Power Film Capacitors – C44P/C20A, 250 – 1,000 VAC, 400 – 1,400 VDC, for PFC and AC Filter

Digitally signed by Marcy Brand

DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corporation, ou=Marketing Communications, cn=Marcy Brand,

email=marcybrand@kemet.com

Date: 2012.06.06 15:52:56 -04'00'