R75 2 - R75 L MKP Series metallized polyPROPYLENE film capacitor Typical applications: This special release is specifically designed for application in series with the main (Capacitive power supply), with particular protection against severe ambient conditions. BEST FITTING COMPONENTS IN TERMS OF BOTH SIZE & PERFORMANCES PRODUCT CODE: R752 (Digit 12: 0 to 9) R75L Digit 12: 0 to 9) 15p27.5 0.8 Od0.05 p = 37.5 1.0 All dimensions are in mm. Product code system The part number, comprising 14 digits, is formed as follows: 1 2 3 4 5 6 7 8 9 10 11 12 R 7 5 13 Pitch (mm) Box thickness (mm) 15.0 15.0 22.5 27.5 37.5 <7.5 7.5 All All All 14 - (mm) AMMO-PACK AMMO-PACK REEL O 355mm REEL O 500mm REEL O 500mm Loose, short leads Loose, long leads (p15mm) Taping style P2 (mm) 12.70 19.05 12.70 12.70 19.05 Fig. (No.) 2 3 2 2 3 Ordering code (Digit 10 to 11) DQ DQ GY CK CK AA 40 50 Pitch (mm) 15.0 22.5 15.0 15.0 22.5/27.5 04+2 30+5 25+2/-1 Note: Ammo-pack is the preferred packaging for taped version. 09/2008 H +0.1 H +0.1 H +0.1 H +0.1 H +0.1 Winding scheme Table 1 Lead length B +0.2 B +0.2 B +0.2 B +0.2 B +0.3 L +0.3 L +0.5 L +0.3 L +0.3 L +0.3 GENERAL TECHNICAL DAta Dielectric: polypropylene film. Plates: aluminium layer deposited by evaporation under vacuum. Winding: non-inductive type. Leads: tinned wire. Protection: plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94 V0. Marking: manufacturer's logo, series (R75), dielectric code (MKP), capacitance, tolerance, A.C. rated voltage, manufacturing date code. Climatic category: 55/105/56 IEC 60068-1 Operating temperature range: -55 to +105C Related documents:IEC 60384-16 Digit 1 to 3 Series code. Digit 4 a.c. rated voltage: 2 = 230V L = 250V Digit 5 Pitch: I=15mm; N= 22.5.mm; W=37.5mm R=27.5mm; Digit 6 to 9 Digits 7 - 8 - 9 indicate the first three digits of Capacitance value and the 6th digit indicates the number of zeros that must be added to obtain the Rated Capacitance in pF. Digit 10 to 11 Mechanical version and/or packaging (table 1) Digit 12 Identifies the dimensions and electrical characteristics (0 to 9). Digit 13 Internal use. Digit 14 Capacitance tolerance: K=10%; M=20% Tolerance 5% (J) available upon request Standard packaging style Maximum dimensions (mm) B max H max L max 182 single sided metallized polypropylene film R75 2 - R75 L MKP Series metallized polyPROPYLENE film capacitor PRODUCT CODE: R752 (Digit 12: 0 to 9) R75L (Digit 12: 0 to 9) Rated Cap. 0.033 0.100 0.082 0.10 0.15 0.18 0.22 0.27 0.33 0.47 0.27 0.33 0.47 0.56 0.68 0.82 1.0 1.5 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F 230Vac / 400Vdc* Std dimensions B H L p 4.0 9.0 13.0 10.0 6.0 12.0 13.0 10.0 5.0 11.0 18.0 15.0 5.0 11.0 18.0 15.0 6.0 12.0 18.0 15.0 6.0 12.0 18.0 15.0 7.5 13.5 18.0 15.0 8.5 14.5 18.0 15.0 8.5 14.5 18.0 15.0 10.0 16.0 18.0 15.0 6.0 15.0 26.5 22.5 6.0 15.0 26.5 22.5 7.0 16.0 26.5 22.5 8.5 17.0 26.5 22.5 10.0 18.5 26.5 22.5 10.0 18.5 26.5 22.5 11.0 20.0 26.5 22.5 13.0 22.0 26.5 22.5 9.0 17.0 32.0 27.5 9.0 17.0 32.0 27.5 9.0 17.0 32.0 27.5 9.0 17.0 32.0 27.5 11.0 20.0 32.0 27.5 11.0 20.0 32.0 27.5 13.0 22.0 32.0 27.5 13.0 22.0 32.0 27.5 14.0 28.0 32.0 27.5 18.0 33.0 32.0 27.5 18.0 33.0 32.0 27.5 18.0 33.0 32.0 27.5 22.0 37.0 32.0 27.5 11.0 22.0 41.5 37.5 13.0 24.0 41.5 37.5 13.0 24.0 41.5 37.5 16.0 28.5 41.5 37.5 16.0 28.5 41.5 37.5 19.0 32.0 41.5 37.5 19.0 32.0 41.5 37.5 20.0 40.0 41.5 37.5 Max dv/dt (V/s) 1000 1000 700 700 700 700 700 700 700 700 250 250 250 250 250 250 250 250 130 130 130 130 130 130 130 130 130 130 130 130 130 70 70 70 70 70 70 70 70 Max K0 (V2/s) 800 E3 800 E3 560 E3 560 E3 560 E3 560 E3 560 E3 560 E3 560 E3 560 E3 200 E3 200 E3 200 E3 200 E3 200 E3 200 E3 200 E3 200 E3 104 E3 104 E3 104 E3 104 E3 104 E3 104 E3 104 E3 104 E3 104 E3 104 E3 104 E3 104 E3 104 E3 56 E3 56 E3 56 E3 56 E3 56 E3 56 E3 56 E3 56 E3 Mechanical version and packaging (Table1) Internal use Tolerance: K (10%); M (20%) All dimensions are in mm Rated Cap. Part Number R752F 2330--0-R752F 3100--0-R752I 2820--0-R752I 3100--0-R752I 3150--0-R752I 3180--0-R752I 3220--0-R752I 3270--0-R752I 3330--0-R752I 3470--0-R752N 3270--0-R752N 3330--0-R752N 3470--0-R752N 3560--0-R752N 3680--0-R752N 3820--0-R752N 4100--0-R752N 4150--0-R752R 3470--0-R752R 3560--0-R752R 3680--0-R752R 3820--0-R752R 4100--0-R752R 4120--0-R752R 4150--0-R752R 4180--0-R752R 4220--0-R752R 4270--0-R752R 4330--0-R752R 4390--0-R752R 4470--0-R752W 4180--0-R752W 4220--0-R752W 4270--0-R752W 4330--0-R752W4390--0-R752W4470--0-R752W4560--0-R752W4680--0-- 0.010 0.015 0.022 0.033 0.047 0.068 0.056 0.068 0.082 0.10 0.15 0.18 0.22 0.27 0.33 0.22 0.27 0.33 0.47 0.56 0.68 0.82 1.0 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10.0 F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F F 250Vac / 560Vdc* Std dimensions B H L p 4.0 9.0 13.0 10.0 4.0 9.0 13.0 10.0 4.0 9.0 13.0 10.0 5.0 11.0 13.0 10.0 5.0 11.0 13.0 10.0 6.0 12.0 13.0 10.0 5.0 11.0 18.0 15.0 5.0 11.0 18.0 15.0 5.0 11.0 18.0 15.0 6.0 12.0 18.0 15.0 7.5 13.5 18.0 15.0 7.5 13.5 18.0 15.0 8.5 14.5 18.0 15.0 10.0 16.0 18.0 15.0 10.0 16.0 18.0 15.0 6.0 15.0 26.5 22.5 6.0 15.0 26.5 22.5 7.0 16.0 26.5 22.5 8.5 17.0 26.5 22.5 10.0 18.5 26.5 22.5 11.0 20.0 26.5 22.5 11.0 20.0 26.5 22.5 13.0 22.0 26.5 22.5 9.0 17.0 32.0 27.5 9.0 17.0 32.0 27.5 9.0 17.0 32.0 27.5 9.0 17.0 32.0 27.5 11.0 20.0 32.0 27.5 11.0 20.0 32.0 27.5 13.0 22.0 32.0 27.5 13.0 22.0 32.0 27.5 13.0 25.0 32.0 27.5 18.0 33.0 32.0 27.5 18.0 33.0 32.0 27.5 18.0 33.0 32.0 27.5 22.0 37.0 32.0 27.5 22.0 37.0 32.0 27.5 11.0 22.0 41.5 37.5 13.0 24.0 41.5 37.5 13.0 24.0 41.5 37.5 16.0 28.5 41.5 37.5 16.0 28.5 41.5 37.5 19.0 32.0 41.5 37.5 19.0 32.0 41.5 37.5 20.0 40.0 41.5 37.5 20.0 40.0 41.5 37.5 24.0 44.0 41.5 37.5 24.0 44.0 41.5 37.5 30.0 45.0 41.5 37.5 Max dv/dt (V/s) 1500 1500 1500 1500 1500 1500 900 900 900 900 900 900 900 900 900 300 300 300 300 300 300 300 300 150 150 150 150 150 150 150 150 150 150 150 150 150 150 90 90 90 90 90 90 90 90 90 90 90 90 Max K0 Part Number (V2/s) 168 E4 168 E4 168 E4 168 E4 168 E4 168 E4 101 E4 101 E4 101 E4 101 E4 101 E4 101 E4 101 E4 101 E4 101 E4 336 E3 336 E3 336 E3 336 E3 336 E3 336 E3 336 E3 336 E3 168 E3 168 E3 168 E3 168 E3 168 E3 168 E3 168 E3 168 E3 168 E3 168 E3 168 E3 168 E3 168 E3 168 E3 101 E3 101 E3 101 E3 101 E3 101 E3 101 E3 101 E3 101 E3 101 E3 101 E3 101 E3 101 E3 R75LF 2100--0-R75LF 2150--0-R75LF 2220--0-R75LF 2330--0-R75LF 2470--0-R75LF 2680--0-R75LI 2560--0-R75LI 2680--0-R75LI 2820--0-R75LI 3100--0-R75LI 3150--0-R75LI 3180--0-R75LI 3220--0-R75LI 3270--0-R75LI 3330--0-R75LN 3220--0-R75LN 3270--0-R75LN 3330--0-R75LN 3470--0-R75LN 3560--0-R75LN 3680--0-R75LN 3820--0-R75LN 4100--0-R75LR 3330--0-R75LR 3390--0-R75LR 3470--0-R75LR 3560--0-R75LR 3680--0-R75LR 3820--0-R75LR 4100--0-R75LR 4120--0-R75LR 4150--0-R75LR 4180--0-R75LR 4220--0-R75LR 4270--0-R75LR 4330--0-R75LR 4390--0-R75LW 4120--0-R75LW 4150--0-R75LW 4180--0-R75LW 4220--0-R75LW 4270--0-R75LW 4330--0-R75LW 4390--0-R75LW 4470--0-R75LW 4560--0-R75LW 4680--0-R75LW 4820--0-R75LW 5100--0-- Mechanical version and packaging (Table1) Internal use Tolerance: K (10%); M (20%) E12 Series available upon request Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. The dv/dt test is carried out at 2 times the above values. *Not suitable for EMI filtering applications. 183 09/2008 R75 2 - R75 L MKP Series metallized polyPROPYLENE film capacitor PRODUCT CODE: R752 (Digit 12: 0 to 9) R75L (Digit 12: 0 to 9) test method and performance electrical characteristics Rated voltage (VR): 230Vac (400Vdc) - 250Vac (560Vdc) Rated temperature (TR):+85C Temperature derated voltage: The following decreasing factor has to be applied on the rated voltage: +85C to +105C: 2.00% per C for VR (d.c.) +85C to +105C: 0.5% per C for VR (a.c.) Capacitance range: 0.056 F to 10 F. Capacitance values: E12 series (IEC 60063 Norm). Capacitance tolerances (measured at 1 kHz): 10% (K); 20% (M). Total self-inductance (L): (Lead length ~2 mm) Pitch (mm) L (nH) 15 10 22.5 18 27.5 18 37.5 20 C0.1F 04 06 25 0.1<C1.0F 5 8 1<C3.3F 6 Insulation resistance: Test conditions Temperature: +25C5C Voltage charge time: 1min 100Vdc Voltage charge: Performance 1x105 M for C0.33F (5x105 M)* 30000 s for C >0.33F (150000 s)* * Typical value. Test voltage between terminations: 1.6xVR applied for 2 s at +25C5C Surge test: 1500 Vpk (10 pulses) for 230Vac 1700 Vpk (10 pulses) for 250Vac Test conditions 1st Temperature: Relative humidity (RH): Test duration: +40C2C 93% 2% 56 days Performance Capacitance change |C/C|: 2% DF change (tg): 10x10-4 at 1kHz Insulation resistance: 50% of initial limit. Test conditions 2nd Temperature: Relative humidity (RH): Test duration: Voltage applied: +40C2C 93% 2% 56 days VR Performance Dissipation factor (DF): tgx10-4 at +25C5C kHz 1 10 100 Damp heat, steady state: 3.3<C10F 10 Capacitance change |C/C|: 5% 10x10-4 at 1kHz DF change (tg): Insulation resistance: 50% of initial limit. Test conditions 3rd Temperature: Relative humidity (RH): Test duration: Voltage applied: +85C2C 85% 2% 250 h VR Performance Capacitance change |C/C|: 5% DF change (tg): 10x10-4 at 1kHz 50% of initial limit. Insulation resistance: Endurance: Test conditions Temperature: Test duration: Voltage applied: +85C2C 2000 h 1.25xVR Performance Capacitance change |C/C|: 5% 10x10-4 at 10kHz for C1F DF change (tg): 10x10-4 at 01kHz for C>1F Insulation resistance: 50% of initial limit. Resistance to soldering heat: Test conditions Solder bath temperature: +260C5C Dipping time (with heat screen):10 s1 s Performance Capacitance change |C/C|: 1% 10x10-4 at 10kHz for C1F DF change (tg): 10x10-4 at 01kHz for C>1F initial limit. Insulation resistance: Long term stability (after two years): Storage: standard environmental conditions (see page 12 of DC film capacitors catalogue) Performance Capacitance change |C/C|: 0.5% Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute - and we specifically disclaim - any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.