Bulletin No. PMK6/A-C Drawing No. LP0481 Released 3/08 Tel +1 (717) 767-6511 Fax +1 (717) 764-0839 www.redlion.net PANEL MOUNT ADAPTER KIT - 1/8 DIN TO 1/16 DIN The panel mount adapter kit is used to mount 1/16 DIN instruments into existing vertical or horizontal 1/8 DIN panel cut-outs. The kit includes two black painted durable steel mounting plates and a sponge rubber gasket. The Adapter Kit, when used with a unit which has NEMA 4/IP65 specifications, will meet NEMA 4/IP65 requirements when properly installed. Red Lion Controls 1/16 DIN products include Temperature and Process Control Units (Models T48, and P48), and the C48 units. ORDERING INFORMATION MODEL NO. PMK6 DESCRIPTION Panel Mount Adapter Kit (1/8 DIN to 1/16 DIN) DIMENSIONS In inches (mm) MOUNTING PLATE ADAPTER PLATE INSTALLATION TYPICAL VERTICAL MOUNT INSTALLATION 1. Remove the paper backing from the adhesive side of the adapter gasket (included with adapter kit) and carefully apply the gasket to the front of the existing panel cut-out. 2. Carefully remove the center section of the panel gasket (provided with the unit) and discard. Slide the panel gasket over the rear of the unit to the back of the bezel. 3. Slide the mounting plate over the rear of the unit to the back of the unit bezel. 4. Insert the unit with mounting plate into the panel cut-out from the front. Slide the adapter plate over the rear of the unit. The protrusion on the adapter plate is designed to fit into the existing 1/8 DIN panel cut-out to properly position the unit. 5. Refer to the installation section of the manual, supplied with the unit, to complete the installation. 1 PART NUMBER PMK60000 PANEL MOUNT ADAPTER KIT - 1/8 DIN TO CUB5 The panel mount adapter kit is used to mount CUB5 units into existing 1/8 DIN panel cut-outs. The kit includes two black painted durable steel mounting plates and a sponge rubber gasket. The Adapter Kit, when used with a unit which has NEMA 4/IP65 specifications, will meet NEMA 4/IP65 requirements when properly installed. Red Lion Controls CUB5 products include Counters, Timers, Temperature, Process and Rate units. ORDERING INFORMATION MODEL NO. PMK6A DESCRIPTION PART NUMBER Panel Mount Adapter Kit (1/8 DIN to CUB5) PMK6A000 DIMENSIONS In inches (mm) MOUNTING PLATE ADAPTER PLATE INSTALLATION TYPICAL HORIZONTAL MOUNT INSTALLATION 1. Remove the paper backing from the adhesive side of the adapter gasket (included with adapter kit) and carefully apply the gasket to the front of the existing panel cutout. 2. Carefully remove the center section of the panel gasket (provided with the unit) and discard. Slide the panel gasket over the rear of the unit to the back of the bezel. 3. Slide the mounting plate over the rear of the unit to the back of the unit bezel. 4. Insert the unit with mounting plate into the panel cut-out from the front. Slide the adapter plate over the rear of the unit. The protrusion on the adapter plate is designed to fit into the existing 1/8 DIN panel cut-out to properly position the unit. 5. Refer to the installation section of the manual, supplied with the unit, to complete the installation. Red Lion Controls AP Red Lion Controls 20 Willow Springs Circle Red Lion Controls BV Printerweg 10 Unit 101, XinAn Plaza Building 13, No.99 Tianzhou Road York PA 17406 NL - 3821 AD Amersfoort Tel +1 (717) 767-6511 Tel +31 (0) 334 723 225 Tel +86 21 6113-3688 Fax +1 (717) 764-0839 Fax +31 (0) 334 893 793 Fax +86 21 6113-3683 ShangHai, P.R. China 200223