SPECIFICATION CONTROL DRAWING Product Revision Product Name B-155-03-S A B-155-05-S A B-155-07-S A B-155-09-S A B-155-11-S A Product Dimensions L oA oB max min min 18.5 2.5 3.0 (0.728) (0.098) (0.118) 18.5 4.3 4.8 (0.728) (0.169) (0.189) 21.0 6.8 7.3 (0.827) (0.267) (0.287) 28.5 8.7 9.2 (1.102) (0.343) (0.362) 28.5 10.8 11.5 (1.122) (0.425) (0.452) D max 3.0 (0.118) 4.8 (0.189) 7.3 (0.287) 9.2 (0.362) 11.5 (0.452) oE min 1.5 (0.059) 2.0 (0.078) 3.3 (0.130) 4.5 (0.177) 4.5 (0.177) Cable Dimensions oF oG H0.5 min max (H0.020) 1.0 2.5 6.0 (0.039) (0.098) (0.236) 1.5 4.3 6.0 (0.059) (0.169) (0.236) 2.8 6.8 8.0 (0.110) (0.267) (0.315) 4.0 8.7 8.0 (0.157) (0.343) (0.315) 4.0 10.8 8.0 (0.157) (0.425) (0.315) Qty: Item 2 J0.5 (J0.020) 7.0 (0.275) 7.0 (0.275) 9.0 (0.354) 9.0 (0.354) 9.0 (0.354) 1 1 1 2 2 MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent clear, radiation cross-linked modified polyolefin. 2. SOLDER PREFORM WITH FLUX: Qty: see table (one solder washer shown). SOLDER: TYPE Sn42Bi58 per ANSI / J-STD-006. FLUX: TYPE ROM1 per ANSI / J-STD-004. 3. MELTABLE SEALING RINGS: Thermally stabilized thermoplastic. APPLICATION 1. These controlled soldering devices are designed for termination of a bare or tin plated copper shield on a cable having an insulation rated for at least +85C. 2. Temperature range: -55C to +125C. 3. Parts will meet the requirements of Tyco Electronics Specification RT-1404 when installed properly. 4. For installation procedure and application equipment, consult RPIP-688-00. For best results, prepare the cable as shown: TITLE: Tyco Electronics Corporation 300 Constitution Drive, Menlo Park, CA. 94025, U.S.A. Raychem Unless otherwise specified dimensions are in millimeters. [Inches dimensions are shown in brackets] TOLERANCES: 0.00 N/A 0.0 N/A 0 N/A PREPARED BY: Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their ROUGHNESS IN application. MICRON DCR NUMBER: REPLACES: SOLDERSLEEVE DEVICE, LOW FIRE HAZARD SHIELD TERMINATION, LOW TEMPERATURE DOCUMENT NO.: B-155-XX-S ANGLES: N/A mforonda D050239 --(c) 2005 Tyco Electronics Corporation. All rights reserved. If this document is printed it becomes uncontrolled. Check for the latest revision. PROD. REV.: DOC. ISSUE: SEE TABLE CAGE CODE : 06090 DATE: 1 SCALE: 6-Jul-05 SIZE: --- A SHEET: 1 of 1