1.2V and 2.5V Micropower
VOLTAGE REFERENCE
FEATURES
●INITIAL ACCURACY:
REF1004-1.2 ±4mV
REF1004-2.5 ±20mV
●MINIMUM OPERATING CURRENT:
REF1004-1.2 10µA
REF1004-2.5 20µA
●EXCELLENT LONG TERM
TEMPERATURE STABILITY
●VERY LOW DYNAMIC IMPEDANCE
●OPERATES UP TO 20mA
●PACKAGE: 8-Lead SOIC
International Airport Industrial Park • Mailing Address: PO Box 11400 • Tucson, AZ 85734 • Street Address: 6730 S. Tucson Blvd. • Tucson, AZ 85706
Tel: (520) 746-1111 • Twx: 910-952-1111 • Cable: BBRCORP • Telex: 066-6491 • FAX: (520) 889-1510 • Immediate Product Info: (800) 548-6132
REF1004
NC
NC
NC
Anode
Cathode
NC
Cathode
NC
1
2
3
4
8
7
6
5
Typical Operating Circuit
(Top View)
APPLICATIONS
●BATTERY POWERED TEST EQUIPMENT
●PORTABLE MEDICAL INSTRUMENTATION
●PORTABLE COMMUNICATIONS DEVICES
●A/D AND D/A CONVERTERS
●NOTEBOOK AND PALMTOP COMPUTERS
DESCRIPTION
The REF1004-1.2 and REF1004-2.5 are two terminal
bandgap reference diodes designed for high accuracy
with outstanding temperature characteristics at low
operating currents. Prior to the introduction of the
REF1004 Micropower Voltage References, accuracy
and stability specifications could only be attained by
expensive screening of standard devices. The REF1004
is a cost effective solution when reference voltage
accuracy, low power, and long term temperature sta-
bility are required.
REF1004 is a drop-in replacement for the LT1004 as
well as an upgraded replacement of the LM185/385
series references. The REF1004C is characterized for
operation from 0°C to 70°C and the REF1004I is
characterized for operation from –40°C to +85°C.
The REF1004 is offered in an 8-lead Plastic SOIC
package and shipped in anti-static rails or tape and
reel.
©1992 Burr-Brown Corporation PDS-1172 Printed in U.S.A. October, 1993
SBVS002
2
®
REF1004
REF1004-1.2 REF1004-2.5
PARAMETER CONDITIONS MIN TYP MAX MIN TYP MAX UNITS
REFERENCE VOLTAGE IR = 100µA 1.231 1.235 1.239 2.490 2.500 2.511 V
REF1004C(1) 1.229 1.235 1.239 2.487 2.500 2.511
REF1004I(2) 1.225 1.235 1.239 2.480 2.500 2.511
AVERAGE TEMPERATURE
COEFFICIENT IMIN ≤ IR ≤ 20mA 20 20 ppm/°C
MINIMUM OPERATION
CURRENT(3) 810 1220 µA
REVERSE BREAKDOWN IMIN ≤ IR ≤ 1mA 1 1 mV
VOLTAGE CHANGE WITH 1.5(3) 1.5(3)
CURRENT 1mA ≤ IR ≤ 20mA 10 10
20(3) 20(3)
REVERSE DYNAMIC
IMPEDANCE(3) IR = 100µA 0.2 0.6 0.2 0.6 Ω
WIDE BAND NOISE (RMS) IR = 100µA
10Hz ≤ IR ≤ 10kHz 60 120 µV
LONG TERM STABILITY IR = 100µA
TA = 25°C ± 0.1°C 20 20 ppm/KHr
NOTES: (1) This specification applies over the full operating temperature range of 0°C ≤ TA ≤ 70°C. (2) This specification applies over the full operating
temperature range of 40°C ≤ TA ≤ +85°C. (3) Denotes the specifications which apply over the full operating temperature range.
SPECIFICATIONS
ELECTRICAL
TA = +25°C unless otherwise noted.
MODEL TAVZPACKAGE
REF1004C-1.2 0°C to +70°C 1.2V 8-Lead SOIC
REF1004C-2.5 0°C to +70°C 2.5V 8-Lead SOIC
REF1004I-1.2 –40°C to +85°C 1.2V 8-Lead SOIC
REF1004I-2.5 –40°C to +85°C 2.5V 8-Lead SOIC
NOTE: Available in Tape and Reel, Add –TR to Model Number.
ORDERING INFORMATION
Reverse Breakdown Current ........................................................... 30mA
Forward Current................................................................................ 10mA
Operating Temperature Range
REF1004C ........................................................................ 0°C to +70°C
REF1004I...................................................................... –40°C to +85°C
Storage Temperature
REF1004C .................................................................. –65°C to +150°C
REF1004I.................................................................... –65°C to +150°C
Lead Temperature (soldering, 10s) ............................................... +300°C
ABSOLUTE MAXIMUM RATINGS
MODEL PART MARKING
REF1004C-1.2 BBREF0412
REF1004C-2.5 BBREF0425
REF1004I-1.2 BBREF0412
REF1004I-2.5 BBREF0425
ORDERING INFORMATION
PACKAGE INFORMATION
PACKAGE DRAWING
MODEL PACKAGE NUMBER(1)
REF1004C-1.2 8-Pin SOIC 182
REF1004C-2.5 8-Pin SOIC 182
REF1004I-1.2 8-Pin SOIC 182
REF1004I-2.5 8-Pin SOIC 182
NOTE: (1) For detailed drawing and dimension table, please see end of data
sheet, or Appendix D of Burr-Brown IC Data Book.
The information provided herein is believed to be reliable; however, BURR-BROWN assumes no responsibility for inaccuracies or omissions. BURR-BROWN assumes
no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change
without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. BURR-BROWN does not authorize or warrant
any BURR-BROWN product for use in life support devices and/or systems.
®
3REF1004
TYPICAL PERFORMANCE CURVES 1.2V
TA = +25°C unless otherwise noted.
REVERSE CHARACTERISTICS
Reverse Voltage (V)
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4
Reverse Current (µA)
100
10
1
0.1
–40°C ≤ T
A
≤ +85°C
Temperature (°C)
–55 –35 –15 5 25 45 65 85 105 125
1.245
1.240
1.235
1.230
1.225
Reverse Voltage (V)
TEMPERATURE DRIFT
REVERSE DYNAMIC IMPEDANCE
Reverse Current (mA)
0.01 0.1 1 10 100
100
10
1
0.1
Reverse Impedance (Ω)
f = 25Hz
–40°C to +85°C
FORWARD CHARACTERISTICS
1.2
0.8
0.4
0.0
Forward Voltage (V)
Forward Current (mA)
0.01 0.1 1 10 100
T
A
= 25°C
16
12
8
4
0
–4
Output Voltage Change (mV)
REVERSE VOLTAGE CHANGE
Reverse Current (mA)
10.01 0.1 10 100
–40°C ≤ T
A
≤ +85°C
REVERSE DYNAMIC IMPEDANCE
Frequency (Hz)
10 100 1k 10k 100k 1M
10k
1k
100
10
1
0.1
Dynamic Impedance (Ω)
T
A
= +25°C
I
REF
= 100µA
4
®
REF1004
TYPICAL PERFORMANCE CURVES 1.2V (CONT)
TA = +25°C unless otherwise noted.
Frequency (Hz)
1k 10k 100k10010
700
600
500
400
300
200
100
0
Noise (nV/√Hz)
NOISE VOLTAGE
I
REF
= 100µA
T
A
= 25°C
FILTERED OUTPUT NOISE
100 1k 10k 100k
Cutoff Frequency (Hz)
Integrated Noise (µV)
70
60
50
40
30
20
10
0
I
REF
= 100µA
100µA
R
C
RESPONSE TIME
Time (µSec)
0 100 200 300 400 500 600
1.5
1.0
0.5
0.0
5
2.5
0
Voltage (V)
36kΩ
V
IN
V
OUT
Output
Input
®
5REF1004
REVERSE CHARACTERISTICS
Reverse Current (µA)
100
10
1
0.1
Reverse Voltage (V)
0.0 0.5 1.0 1.5 2.0 2.5 3.0
–40°C ≤ T
A
≤ +85°C
TYPICAL PERFORMANCE CURVES 2.5V
TA = +25°C unless otherwise noted.
FORWARD CHARACTERISTICS
1.2
1.0
0.8
0.6
0.4
0.2
0.0
Forward Voltage (V)
Forward Current (mA)
0.01 0.1 1 10 100
T
A
= +25°C
REVERSE VOLTAGE CHANGE
Reverse Current (mA)
Output Voltage Change (mV)
6
5
4
3
2
1
0
–1
–20.01 0.1 1 10 100
–40°C ≤ T
A
≤ +85°C
Temperature (°C)
–55 –35 –15 5 25 45 65 85 105 125
2.520
2.515
2.510
2.505
2.500
2.495
2.490
2.485
2.480
2.475
Reference Voltage (V)
TEMPERATURE DRIFT
REVERSE DYNAMIC IMPEDANCE
1000
100
10
1
0.1
Reverse Impedance (Ω)
Reverse Current (mA)
0.01 0.1 1 10 100
f = 25Hz
–40°C to +85°C
REVERSE DYNAMIC IMPEDANCE
Frequency (Hz)
10 100 1k 10k 100k 1M
10k
1k
100
10
1
0.1
Dynamic Impedance (Ω)
T
A
= +25°C
I
REF
= 100µA
6
®
REF1004
TYPICAL PERFORMANCE CURVES 2.5V (CONT)
TA = +25°C unless otherwise noted.
Noise (nV/√Hz)
Frequency (Hz)
1k 10k 100k10010
1400
1200
1000
800
600
400
200
0
NOISE VOLTAGE
IREF = 100µA
FILTERED OUTPUT NOISE
100
Cutoff Frequency (Hz)
1k 10k 100k
Integrated Noise (µV)
120
100
80
60
40
20
0
100µA
R
C
I
REF
= 100µA
RESPONSE TIME
Voltage (V)
Time (µSec)
4.0
3.0
2.0
1.0
0.0
5.0
0.0 0 100 200 300 400 500 600
24kΩ
V
IN
V
OUT
Output
Input
®
7REF1004
FIGURE 1. Low-Noise Reference.
FIGURE2. Micropower Reference from 9V Battery.
1.5V (see Note)
REF1004-1.2
3kΩ
1.235V
NOTE: Output regulates
to 1.285V for I
O
= 0.
FIGURE 3. 1.2V Reference from 1.5V Battery.
FIGURE 4. 2.5V Reference.
+
100µA
V
I
≥ 5V
22Ω
REF1004-1.2
Output
5µF
9V
REF1004-1.2
510kΩ
1.235V
5V
REF1004-2.5
50kΩ
2.5V
FIGURE 5. Lead-Acid Low-Battery-Voltage Detector.
TLC271 LO = Battery Low
12V
Battery Output
1MΩ
R
1(1)
1%
133kΩ
1% REF1004-1.2
NOTE: (1) R
1
sets trip point, 60.4kΩ per cell for 1.8V per cell.
PACKAGING INFORMATION
Orderable Device Status (1) Package
Type Package
Drawing Pins Package
Qty Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
REF1004C-1.2 ACTIVE SOIC D 8 75 Green (RoHS &
no Sb/Br) CU NIPDAU Level-3-260C-168 HR
REF1004C-1.2/2K5 ACTIVE SOIC D 8 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-3-260C-168 HR
REF1004C-1.2/2K5E4 ACTIVE SOIC D 8 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-3-260C-168 HR
REF1004C-1.2E4 ACTIVE SOIC D 8 75 Green (RoHS &
no Sb/Br) CU NIPDAU Level-3-260C-168 HR
REF1004C-2.5 ACTIVE SOIC D 8 75 Green (RoHS &
no Sb/Br) CU NIPDAU Level-3-260C-168 HR
REF1004C-2.5/2K5 ACTIVE SOIC D 8 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-3-260C-168 HR
REF1004C-2.5/2K5E4 ACTIVE SOIC D 8 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-3-260C-168 HR
REF1004C-2.5E4 ACTIVE SOIC D 8 75 Green (RoHS &
no Sb/Br) CU NIPDAU Level-3-260C-168 HR
REF1004I-1.2 ACTIVE SOIC D 8 75 Green (RoHS &
no Sb/Br) CU NIPDAU Level-3-260C-168 HR
REF1004I-1.2/2K5 ACTIVE SOIC D 8 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-3-260C-168 HR
REF1004I-1.2/2K5E4 ACTIVE SOIC D 8 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-3-260C-168 HR
REF1004I-1.2E4 ACTIVE SOIC D 8 75 Green (RoHS &
no Sb/Br) CU NIPDAU Level-3-260C-168 HR
REF1004I-2.5 ACTIVE SOIC D 8 75 Green (RoHS &
no Sb/Br) CU NIPDAU Level-3-260C-168 HR
REF1004I-2.5/2K5 ACTIVE SOIC D 8 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-3-260C-168 HR
REF1004I-2.5/2K5E4 ACTIVE SOIC D 8 2500 Green (RoHS &
no Sb/Br) CU NIPDAU Level-3-260C-168 HR
REF1004I-2.5E4 ACTIVE SOIC D 8 75 Green (RoHS &
no Sb/Br) CU NIPDAU Level-3-260C-168 HR
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
PACKAGE OPTION ADDENDUM
www.ti.com 7-May-2008
Addendum-Page 1
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
PACKAGE OPTION ADDENDUM
www.ti.com 7-May-2008
Addendum-Page 2
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device Package
Type Package
Drawing Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0 (mm) B0 (mm) K0 (mm) P1
(mm) W
(mm) Pin1
Quadrant
REF1004C-1.2/2K5 SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
REF1004C-2.5/2K5 SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
REF1004I-1.2/2K5 SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
REF1004I-2.5/2K5 SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
PACKAGE MATERIALS INFORMATION
www.ti.com 11-Mar-2008
Pack Materials-Page 1
*All dimensions are nominal
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
REF1004C-1.2/2K5 SOIC D 8 2500 346.0 346.0 29.0
REF1004C-2.5/2K5 SOIC D 8 2500 346.0 346.0 29.0
REF1004I-1.2/2K5 SOIC D 8 2500 346.0 346.0 29.0
REF1004I-2.5/2K5 SOIC D 8 2500 346.0 346.0 29.0
PACKAGE MATERIALS INFORMATION
www.ti.com 11-Mar-2008
Pack Materials-Page 2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,and other changes to its products and services at any time and to discontinue any product or service without notice. Customers shouldobtain the latest relevant information before placing orders and should verify that such information is current and complete. All products aresold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standardwarranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except wheremandated by government requirements, testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products andapplications using TI components. To minimize the risks associated with customer products and applications, customers should provideadequate design and operating safeguards.TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Informationpublished by TI regarding third-party products or services does not constitute a license from TI to use such products or services or awarranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectualproperty of the third party, or a license from TI under the patents or other intellectual property of TI.Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompaniedby all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptivebusiness practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additionalrestrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids allexpress and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is notresponsible or liable for any such statements.TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonablybe expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governingsuch use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, andacknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their productsand any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may beprovided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products insuch safety-critical applications.TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products arespecifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet militaryspecifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely atthe Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products aredesignated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designatedproducts in automotive applications, TI will not be responsible for any failure to meet such requirements.Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers amplifier.ti.com Audio www.ti.com/audioData Converters dataconverter.ti.com Automotive www.ti.com/automotiveDSP dsp.ti.com Broadband www.ti.com/broadbandClocks and Timers www.ti.com/clocks Digital Control www.ti.com/digitalcontrolInterface interface.ti.com Medical www.ti.com/medicalLogic logic.ti.com Military www.ti.com/militaryPower Mgmt power.ti.com Optical Networking www.ti.com/opticalnetworkMicrocontrollers microcontroller.ti.com Security www.ti.com/securityRFID www.ti-rfid.com Telephony www.ti.com/telephonyRF/IF and ZigBee® Solutions www.ti.com/lprf Video & Imaging www.ti.com/videoWireless www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265Copyright © 2008, Texas Instruments Incorporated
