105
Power Dividers
Power Dividers
YCNEUQERF
EGNAR
)zHG(
ESAC
ELYTS
LEDOM
REBMUN
EDUTILPMA
ECNALAB
)Bd(
ESAHP
ECNALAB
)seerged(
NOITRESNI
SSOL
xam)Bd(
NOITALOSI
nim)Bd(
RWSV
xam
TUPNI
REWOP
)W(xam
0.2-5.0 197-AMS-40-0255-DWP 5.0010.18105.15
0.8-0.2 197-AMS-40-2255-DWP 5.0010.18105.15
0.81-0.6 297-AMS-40-6255-DWP 5.0010.18105.15
0.81-0.2 197-AMS-40-2355-DWP 5.0015.18105.101
0.81-5. 397-AMS-40-0355-DWP 5.0015.16105.101
500 MHz - 18.0 GHz High Performance
MECHANICAL SPECIFICATIONS - INCHES (mm)
Full 2.0 - 18.0 GHz bandwidth units
Low VSWR - High Isolation
Rugged Stripline Construction
Meets Mil-E-5400 and Mil-E16400 Environment
Note: 1. Specifications assume that all of the outputs are terminated with a load that has a VSWR not greater than 2.0:1.
2. TNC or NType output connectors are available by substituting "TNC" or "NNN" for "SMA" in the Model Number.
Housings thickness will increase to 0.88 to accomodate these larger diameter connectors.
ELECTRICAL SPECIFICATIONS
Midwest Microwave's series of high performance isolated Power Dividers
are small, lightweight, ruggedly constructed stripline units that possess
inherently low insertion loss and VSWR with high isolation and excellent
phase and amplitude tracking. Units are available in multi-octave, and ultra-
wideband frequency bandwidths covering the entire range of 0.5 - 18.0 GHz.
Four Way Isolated
E
TYP
ESAC
ELYTS A B C D E
THGIEW
rGzO
1)2.67(00.3)0.61(36.0)53.6(052.0)8.05(00.2)00.2(080.000.4511
2)1.73(64.1)5.81(37.0)53.6(052.0)8.05(00.2)00.2(080.050.285
3)1.231(02.5)4.52(00.1)53.6(052.0)8.05(00.2)00.2(080.003.7702
