V-Series V-Series CONTURA II, III SWITCHES The V-Series Contura II & III snap-in rocker switches offer countless unique options including choices for ratings, circuits, colors, illuminations and symbols. These single or double pole switches feature removable actuators in a choice of actuator styles and colors, and can be illuminated with either square or bar shaped lenses. Actuators may be purchased and stocked separately. An optional plug-in terminal connector enables pre-wiring of wire harnesses. The Contura switches with sealed option, are certified to IP66/68, signifying complete protection against dust and prolonged spray and submersion under pressure, and are recognized to UL1500 - Ignition Protection for Marine Products. These switches are vibration, shock, thermoshock, moisture and salt spray resistant. Temperature ratings range from -40C to +85C. Resources: Download 3D CAD Files IGS STP Watch Product Video Product Highlights: Countless options for ratings, circuits, colors, illuminations and legends Certified to IP66/68 for front panel components Vibration, shock, thermoshock, moisture and salt spray resistant Temperature range from -40C to +85C. Typical Applications: On/Off Highway Equipment Marine Military Armored Vehicles Mining Machinery and Equipment Any application requiring environmental protection Carling Technologies, Inc. 60 Johnson Avenue, Plainville, CT 06062 Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: 860.793.9281 Fax: 860.793.9231 www.carlingtech.com 2 | V-Series Contura Sealed Rocker Switches - Design Features V-Series Switch DESIGN FEATURES INTERCHANGEABLE ACTUATORS Panel redesign is a snap with our wide range of rocker styles. Achieve maximum design variety with minimum inventory. Simply swap rockers to create an entirely new look for your panel. OPTIONAL PANEL SEAL Prevents water/dust ingress behind panel. DUAL SEAL PROTECTION Seals out water, dust, debris, and enables switch certification to IP66/68 for front panel components. MULTIPLE LIGHTING OPTIONS In addition to Incandescent lamps, our LED illumination is offered in a wide array of light intensities, colors, as well as dual level, tri-color, and flashing options. CLEAN CONNECTIONS Options for both eight and ten terminal base styles with AMP & Packard compatible connectors affords myriad circuit options while providing ease of assembly. BRASS ROLLER PIN Robust mechanism eliminates the need for lubricants. Enables switch to withstand -40C to +85C temperatures. SILVER PLATED BUTT CONTACT MECHANISM Providing 50k to 100k electrical cycles and a variety of different electrical ratings. *Manufacturer reserves the right to change product specification without prior notice. Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793-9281 Fax: (860) 793-9231 www.carlingtech.com V-Series Contura Sealed Rocker Switches - Actuator Options & Accessories | 3 Contura II & III Contura X Contura IV Contura XI Contura V Contura XII Contura VI (WAVE) Contura XIV Contura VII Illuminated Indicators & Accessories The Contura II & III actuators are constructed of thermoplastic polycarbonate and are offered with a hard nylon overlay or a "soft-touch" elastomer overlay. These models incorporate aesthetic designs on the top and bottom of the rocker featuring two rows of raised "bumps" on the Contura II and three "indented" lines on the Contura III. The Contura IV's "Shape to create a Shape" actuator works with the curves, contours & advanced styling of the latest panel designs, flowing with these advanced curves & radii. This actuator style fits on the Contura flush bracket/bezel. The symmetrically curved Contura V actuator provides the perfect complement to the Contura IV's "Shape to create a Shape" design concept. With its flush style mounting bracket, Contura V can be mounted in between two Contura IV's, by itself, or in groups. The Contura VI WAVE sealed rocker switches, when used in a row, create an uniquely appealing "wave" design on your panel. A variety of colors and finishes are available for both rocker and wave insert. Contura VI features bar and oval lenses. Contura VII featuring gently curved corners and edges assuring compatibility with most any panel design. Intuitive feel is maximized by the use of 2 embossed circular pads located at opposite ends of the rocker. Any combination of Bar or Oval style lenses can be located in the pads providing a truly unique look, exclusive to Contura VII. The raised bracket/bezel on the Contura X helps prevent inadvertent actuation of the rocker, as well as preventing debris from being trapped under the actuator. This curved rocker style is available with a variety of lenses and legends. The raised bracket/bezel on the Contura XI helps prevent inadvertent actuation of the rocker, as well as preventing debris from being trapped under the actuator. This convex style rocker is available with a wide variety of lenses and legends. The Contura XII version features a paddle style actuator with the raised bracket/bezel of Contura X and XI. The contoured handle design provides intuitive recognition and ease of operation and is available with all Contura X and XI lens and legend offerings. The Contura XIV represents a sleek new crossover rocker design which should appeal to Trucks, Buses and Heavy Vehicles as well as the Marine Industry. Intuitive feel is provided by recessed ridges along with a Center Groove which effectively defines the boundary between top and bottom switch functions. Alert operator of systems functions or malfunctions, are offered with removable/replaceable lamps in Contura II, II, V or X styles. Accessories include connectors, mounting panels, hole plugs, panel seals, and actuator removal tools. Refer to accessories page for full details Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793-9281 Fax: (860) 793-9231 www.carlingtech.com 4 | V-Series Contura Sealed Rocker Switches - General Specifications Electrical Contact Rating .4VA @ 24VDC (MAX) resistive 15 amps, 125VAC 10 amps, 250VAC 1/2 HP 125-250VAC 20 amps, 4-14VDC 15 amps, 15-28VDC 10A, 14VT 6A, 125VAC L Dielectric Strength 1500 Volts RMS Insulation Resistance 50 Megohms Initial Contact Resistance 10 milliohms max. @ 4VDC Life 50,000 - 100,000 cycles circuit dependent Contacts Silver alloy, silver tin-oxide, fine silver Terminals Brass or copper/silver plate 1/4" (6.3mm) Quick Connect terminations standard. Solder lug, Wire Lead Mechanical Endurance 150,000 cycles minimum circuit dependent Agency Certifications Environmental Sealing Corrosion Operating Temp. Vibration 1 Vibration 2 Physical Lighted Incandescent - rated 10,000 hours Neon - rated 25,000 hours LED - rated 100,000 hours 1/2 life (LED is internally ballasted for voltages to 24VDC) Seals Internal Optional external gasket panel seal Base Polyester blend rated to 125C with a UL flammability rating of 94V0. Contura II,III,IV,V, Hard Surface: Basic actuator VI, VII Actuator structure molded of thermoplastic polycarbonate with a hard Nylon 66 thermoplastic surface overlay. Soft Surface: Basic actuator structure molded of thermoplastic polycarbonate with an elastomer overlay. Contura X,XI,XII Actuator,VP Nylon 66 Reinforced rated to 105C Lens Polycarbonate rated at 100C Contura XIV Polycarbonate lens/sub-rocker with ABS shell Actuator Travel (Angular Displacement) 2 position 3 positions 18 9 from center Mounting Specifications Shock Salt Spray Dust Thermal Shock Moisture Resistance Ignition Protection Sealed version: IP66/68, this rating applies to front panel components of the actual switch only, and signifies complete protection against dust as well as powerful jets of water. Mixed Flowing Gas (MFG) Class III 3 year accelerated exposure per ASTM B-827, B-845 Silver and gold contacts -40C to +85C Per Mil-Std 202F, Method 204D Test Condition A 0.06 DA or 10G's 10-500 Hz. Tested with VCH connector. Test criteria - No loss of circuit during test, pre and post test contact resistance. Resonance search 24-50 Hz 0.40 DA 50-2000 Hz 10 G's peak Horizontal Axis 3-5 G's max. Random 24 Hz 0.06 PSD-Gsq/Hz 60 Hz 0.50 100 Hz 0.50 200 Hz 0.025 2000 Hz 0.025 No loss of circuit during test; <10 seconds chatter. Per Mil-Std 202F, Method 213B, Test Condition K @ 30G's. Tested with VCH connector. Test criteria - No loss of circuit during test, pre and post test contact resistance. Per Mil-Std 202F, Method 101D, Test Condition A, 96 Hrs. Sealed version only. Mil STD 810, Method 510.2 Air Velocity 300 Ft/Min Duration 16Hr Per Mil-Std 202F, Method 107F, Test Cond. A, -55C to +85C. Test criteria pre and post test contact resistance Per Mil-Std 202F, Method 106F, Test Criteria - pre and post test contact resistance All Contura switches with sealed construction meet the requirements of UL1500/ISO8846 for ignition protection, in addition to conformance with EC directive 94/25/EC for marine products. .830[21.08] Panel Thickness Range Gaskets Acceptable Panel Thickness 0 .030 to .250 (.76 to 6.35mm) TEST CUT 1.450[36.83] HOLE IN 1 .030 to .109 & .147 to .157 ACTUAL MATERIAL (.76 to 2.77mm & 3.73 to 3.98mm) Recommended: No gasket with panel SWITCH thickness of .032, .062, .093, .125,.187 or .250 MOUNTING HOLE Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793-9281 Fax: (860) 793-9231 www.carlingtech.com V-Series Contura Sealed Rocker Switches- Contura II & III - Ordering Scheme | 5 V 1 D A B T 0 B 1 Series 2 Circuit 3 Rating 4 5 6 Termination Illumination Lamp 7 Lamp 8 Bracket 1 SERIES V 2 CIRCUIT Terminal Connections as viewed ( ) - momentary from bottom of switch: SP - single pole - uses terminals 1, 2 & 3. 8 terminal10 terminal DP - double pole uses terminals 1, 2, 3, 4, 5 & 6. 8- -7 8- -7 Terminals 7, 8, 9 & 10 for lamp circuit only. 1- -4 1- -4 2- -5 2- -5 3- -6 3- -6 10 - - 9 Position: 1 2 3 SP DP 2 & 3, 5 & 6 Connected Terminals 1 & 2, 4 & 5 1 A ON NONE OFF 2 B (ON) NONE OFF 3 C ON NONE (OFF) 4 D ON NONE ON 5 F ON NONE (ON) 6 J ON OFF ON 7 K ON OFF (ON) 8 L (ON) OFF (ON) SPECIAL CIRCUITS H* 2&3 2 & 3, 5 & 4 5&4 G* 2 & 3, 5 & 6 2&3 OFF S* 2 & 3, 5 & 6 2&3 1&2 M* (2 & 3, 5 & 6) 2&3 OFF R* (2 & 3, 5 & 6) 2&3 2&1 E* 5&6 5&3 5&1 *Jumper between terminals 2 & 5 for circuits H,G,M,R & S are specified in selection 4. External jumper between terminals 2 & 4 for circuit E are provided by customer. Circuit E may be used for SP OFF-ON-ON circuit. 3 RATING 3 1 .4VA @ 28VDC Resistive B 15A 24V C 20A 18V D 20A 12V E 20A 14V, 10A 14VT (circuit 1, 4 , A & D only) F 10A 14V, 6A 14VT (circuit G only) M .4VA/20A 12V N .4VA/15A 24V 4 TERMINATION / BASE STYLE 8 term 10 Term Termination Jumper 1 2 .250 TAB (QC) no barriers No A B .250 TAB (QC) with barriers No J K .250 TAB (QC) no barriers Yes T2 to 5 3 5 Solder Lug no barriers No C D Solder Lug No 5 6 Wire Leads no barriers No E F Wire Leads No Note: Codes J & K for circuits H, G & M. Do not use silicone based lubricants to reduce terminal insertion forces during connector assembly, as it is detrimental to function and performance. 5 ILLUMINATION Lamp #1:above terminals 1 & 4 end of switch.; Lamp #2 above terminals 3 & 6 end of switch. Positive (+) and negative (-) symbols apply to LED lamps only Sealed Unsealed Lamps Illumination Type Lamp wired to Terminals S 0 NONE - - A 1 1 INDEPENDENT 8 (+) 7 (-) B 2 1 DOWN 3 (+) 7 (-) C 3 2 UP 3 (+) 7 (-) D 4 1 DOWN 3 (+) 7 (-) 2 DOWN 1 (+) 7 (-) E 5 1 UP 1 (+) 7 (-) 2 UP 3 (+) 7 (-) F 6 1 INDEPENDENT 8 (+) 7 (-) 2 UP 3 (+) 6 (-) G 7 1 INDEPENDENT 8 (+) 7 (-) 2 UP 3 (+) 7 (-) H Z 2 INDEPENDENT 8 (+) 7 (-) U Y 1 INDEPENDENT 8 (+) 7 (-) 2 INDEPENDENT 10 (+) 9 (-) SINGLE POLE SWITCHES ONLY J 8 1 DOWN 3 (+) 8 (-) 2 INDEPENDENT 6 (+) 7 (-) K W 1 INDEPENDENT 8 (+) 7 (-) 2 INDEPENDENT 6 (+) 7 (-) DOUBLE POLE SWITCHES ONLY L 9 1 DOWN 3 (+) 6 (-) M R 1 UP 3 (+) 6 (-) N T 1 DOWN 3 (+) 6 (-) 2 DOWN 1 (+) 4 (-) P V 1 UP 1 (+) 4 (-) 2 UP 3 (+) 6 (-) A R B 00 9 Actuator 10 Lens 11 Color 12 Legend 0 00 13 14 Legend Actuator Orientation Lens Legend 6,7 LAMP (SAME CODING FOR BOTH SELECTIONS) Selection 6: above terminals 1 & 4; Selection 7: above terminals 3 & 6 No lamp 0 Neon 1 125VAC 2 250VAC Incandescent 4 3V 5 6V 6 12V 7 18V 8 24V LED* superbright superbright Red Amber Green Red 2VDC A L F R 6VDC B M G S 12VDC C N H T 24VDC D P J V * Consult factory for "daylight bright" LED options. Typical current draw for LED is 20ma. 8 FLUSH BRACKET COLOR 1, PANEL SEAL Black White Gray No Seal B W G One Seal C Y H 9 ACTUATOR 0 No Actuator A, B Contura II C, D Contura III Actuator orientation above terminals: 10 LENS 0 - No Actuator Clear White Amber 1 6 8 2 7 C 3 8 D 4 9 E 5 A F Z - No Lens Green Red G M H N J P K R L S 3,6 1,4 Blue T U V W Y Lens color for LEDs must be clear, white, or match color of LED. Green or blue lenses are not recommended with Neon lamps. 11 ACTUATOR COLOR 1 AND TEXTURE 0 - No Actuator Black Gray Red Soft Surface B G R Hard Surface C H S White W Y 12 ACTUATOR LENS OR BODY LEGENDS 2 11 ON 12 OFF 13 I 14 O OFF ONO I 15 O O 16 O O 17 O I 18 I O F N N F F F For additional legend options & codes, visit us at www.carlingtech.com. 13 LEGEND ORIENTATION 0 No legend (used with codes 11-18 in selection 12) 1 Orientation 1 2 Orientation 2 3 Orientation 3 4 Orientation 4 1 2 3 4 14 ACTUATOR LENS LEGEND 00 No legend this location / no actuator (used with codes 11-18 in selection 12) Selection 14 required when switch requires two legends. If the two legends consist of one lens and one body legend, lens legend must be specified in selection 12; body legend specified in selection 14. For legend options & codes, visit us at www.carlingtech.com. Notes: Consult factory to verify horsepower rating for your particular circuit choice. 1 Custom colors are available. Consult factory. 2 Body legends not available on Soft surface actuators; White imprinting is standard on black actuators; Black imprinting is standard on white, red and gray actuators. Custom colors are available, consult factory. 3 Additional ratings available. See V-Series Switch Accessories page. 4 Contura II available with two square lenses. Consult factory for details. Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793-9281 Fax: (860) 793-9231 www.carlingtech.com 6 | V-Series Contura Sealed Rocker Switches - Contura II & III Locking - Ordering Scheme V 1 D A S W 0 B 1 Series 2 Circuit 3 Rating 4 5 6 Termination Illumination Lock 7 Lamp 1 SERIES V 2 CIRCUIT Terminal Connections as viewed ( ) - momentary from bottom of switch: SP - single pole - uses terminals 1, 2 & 3. 8 terminal10 terminal DP - double pole uses terminals 1, 2, 3, 4, 5 & 6. 8- -7 8- -7 Terminals 7, 8, 9 & 10 for lamp circuit only. 1- -4 1- -4 2- -5 2- -5 3- -6 3- -6 10 - - 9 Position: 1 2 3 SP DP 2 & 3, 5 & 6 Connected Terminals 1 & 2, 4 & 5 1 A ON NONE OFF 4 D ON NONE ON 6 J ON OFF ON 7 K ON OFF (ON) 8 L (ON) OFF (ON) 9 N OFF NONE ON SPECIAL CIRCUITS H* 2&3 2 & 3, 5 & 4 5&4 G* 2 & 3, 5 & 6 2&3 OFF S* 2 & 3, 5 & 6 2&3 1&2 M* (2 & 3, 5 & 6) 2&3 OFF R* (2 & 3, 5 & 6) 2&3 2&1 E* 5&6 5&3 5&1 *Jumper between terminals 2 & 5 for circuits H,G,M,R & S are specified in selection 4. External jumper between terminals 2 & 4 for circuit E are provided by customer. Circuit E may be used for SP OFF-ON-ON circuit. 3 RATING 4 1 B C D E F M N .4VA @ 28VDC Resistive 15A 24V 20A 18V 20A 12V 20A 14V, 10A 14VT (circuit 1, 4 , A & D only) 10A 14V, 6A 14VT (circuit G only) .4VA/20A 12V .4VA/15A 24V 4 TERMINATION / BASE STYLE 8 term 10 Term Termination Jumper 1 2 .250 TAB (QC) no barriers No A B .250 TAB (QC) with barriers No J K .250 TAB (QC) no barriers Yes T2 to 5 3 5 Solder Lug no barriers No C D Solder Lug No 5 6 Wire Leads no barriers No E F Wire Leads No Note: Codes J & K for circuits H, G & M. Do not use silicone based lubricants to reduce terminal insertion forces during connector assembly, as it is detrimental to function and performance. 5 ILLUMINATION & SWITCH SEALING Lamp #1:above terminals 1 & 4 end of switch.; Lamp #2 above terminals 3 & 6 end of switch. Positive (+) and negative (-) symbols apply to LED lamps only Sealed Unsealed Lamps Illumination Type Lamp wired to Terminals S 0 NONE - - C 3 2 UP 3 (+) 7 (-) H Z 2 INDEPENDENT 8 (+) 7 (-) DOUBLE POLE SWITCHES ONLY M R 1 UP 3 (+) 6 (-) 8 Bracket A Z E 00 9 Actuator 10 Lens 11 Function 12 Legend 0 13 Legend Orientation 7 LAMP Lamp above terminals 3 & 6 end of switch No lamp 0 Neon 1 125VAC 2 250VAC Incandescent 4 3V 5 6V 6 12V 7 18V 8 24V LED* superbright superbright Red Amber Green Red 2VDC A L F R 6VDC B M G S 12VDC C N H T 24VDC D P J V * Consult factory for "daylight bright" LED options. Typical current draw for LED is 20ma. 8 FLUSH BRACKET COLOR 1, PANEL SEAL Black White Gray No Seal B W G One Seal C Y H 9 HARD SURFACE ACTUATOR 1 Black Gray Red Contura II A B G Contura III C D White H E F 3,6 Actuator orientation above terminals: 10 LENS Z - No Lens Clear White Amber Green Red 3 8 D J P 1,4 Blue V Lens color for LEDs must be clear, white, or match color of LED. Green or blue lenses are not recommended with Neon lamps. 11 ACTUATOR LOCK FUNCTION AND COLOR 1 Lock Color Up Down Up & Down Center 3 Match Actuator A H R 1 Black B J S 2 White C K T 3 Red D L V 4 Safety Orange E M W 5 12 ACTUATOR LENS OR BODY LEGEND 2 00 - No Legend 21 22 23 24 OFF ON O I 25 O 26 O 27 O 28 I F N F For additional legend options & codes, visit us at www.carlingtech.com. 13 LEGEND ORIENTATION 0 No legend (used with codes 21-28 in selection 12) 1 Orientation 1 2 Orientation 2 3 Orientation 3 4 Orientation 4 1 6 LOCK Lock above terminals 1 & 4 end of switch W lock Notes: Consult factory to verify horsepower rating for your particular circuit choice. 1 Custom colors are available. Consult factory. 2 White imprinting is standard on black actuators; Black imprinting is standard on white, red and gray actuators. Custom colors are available, consult factory. 3 Only available with 3 position circuits. Center OFF and special circuits only available with center position lock function. 4 Additional ratings available. See V-Series Switch Accessories page. Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793-9281 Fax: (860) 793-9231 www.carlingtech.com 2 3 4 V-Series Contura Sealed Rocker Switches - Contura II & III - Dimensional Specifications | 7 Dimensional Specifications: in. [mm] Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793-9281 Fax: (860) 793-9231 www.carlingtech.com 8 | V-Series Contura Sealed Rocker Switches - II to XIV - Circuit Diagrams Circuit Diagrams: CIRCUIT CODE CIRCUIT DIAGRAM CIRCUIT CODE CIRCUIT DIAGRAM 3 1 3 2 3 5 3 3 3 1 2 5 3 4 2 1 5 3 4 6 2 3 1 4 1 5 6 5 6 2 5 3 4 SYM. DEFINITION DESIGNATES TERMINALS AND CONTACTS DESIGNATES MAINTAINED CIRCUITS DESIGNATES OTHER POSITION H 2 5 SYMBOL LEGEND 3 8 6 3 2 G 1 3 2 6 3 3 2 5 S 2 7 1 5 F 1 6 R 2 2 6 5 2 E 6 4 M 2 3 6 3 6 D 1 4 5 3 1 6 2 5 3 L 2 3 5 2 5 C 1 1 6 2 4 6 K 2 3 4 2 B 1 3 J 2 3 CIRCUIT DIAGRAM 1 6 A 2 CIRCUIT CODE DESIGNATES MOMENTARY CIRCUITS DESIGNATES TWO POSITION CONNECTION 2 5 DESIGNATES EXTERNAL JUMPER PROVIDED BY CUSTOMER Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793-9281 Fax: (860) 793-9231 www.carlingtech.com V-Series Contura Sealed Rocker Switches - II to XIV - Lamp Circuit Diagrams, Hazard Warning Circuit Diagrams | 9 Lamp Circuit Diagrams: LAMP CIRCUIT CODE CIRCUIT DIAGRAM LAMP CIRCUIT CODE +8 +8 A/1 F/6 1 -6 +3 L/9 2 LAMP CIRCUIT CODE CIRCUIT DIAGRAM +3 -6 SPECIAL #1 1 G/7 +3 +3 1 2 SPECIAL #3 +1 +3 -4 H/Z 2 N/T 2 -7 +8 -6 2 1 SPECIAL #4 +3 -8 1 J/8 2 +1 +3 -4 +6 P/V 2 1 -7 -6 1 2 -7 +1 +3 +8 K/W 2 1 +6 U/Y 2 1 -7 (-)7 +8 +10 1 2 -7 -9 J-Series Hazard Warning Circuit Diagrams: CIRCUIT CODE CIRCUIT CODE CIRCUIT DIAGRAM 1 17 18 10(-) 3 J1 1 2 11 13 5 3 14 1 3 5 6 3 14 3 14 JJ 8 1 2 11 13 17 18 10(-) J4 8 JA 17 18 10(-) 5 5 5 1 2 11 13 8 J3 17 18 3 2 1 3 1 2 8 J2 1 J5 17 18 10(-) 5 CIRCUIT DIAGRAM 10(-) 11 13 JK 1 -7 -7 +1 +3 2 -7 +8 C/3 +6 1 -7 +3 2 +8 -6 M/R 2 1 -7 +6 -7 +8 1 E/5 CIRCUIT DIAGRAM -7 +3 D/4 +3 1 -7 B/2 LAMP CIRCUIT CODE CIRCUIT DIAGRAM 3 14 15 12 6 16 NOTE: J circuits are available for all non-locking V-Series styles. Consult factory for partnumber details. SYMBOL LEGEND SYM. DEFINITION DESIGNATES TERMINALS AND CONTACTS DESIGNATES LAMP LOCATION Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793-9281 Fax: (860) 793-9231 www.carlingtech.com +3 2 10 | V-Series Contura Sealed Rocker Switches - Stand-Alone Components Reduce inventory levels and cost by stocking actuators and base switches separately. Contura II, III, IV, V, VI, VII, X, XI, XII, XIV Base switches separately: specify V with code selections 2-8 in the ordering schemes. Contura II, III, IV, V Actuator only: VV with code A or C for selection 9, & with selections 10-14 in the ordering schemes. Contura VI Actuator with lenses and inserts only: VV with code selections 9-16 Contura II, III, IV, V, VII Actuator only: VV with code A, C, E, G, P or Z for selection 9 & with selections 10-14 in the ordering schemes. Contura X, XI, XII, XIV actuators with lenses separately: VV with code selections 9-14 in the ordering schemes. Panel Seal: VPS Contura X & XI actuators without lenses separately: VVR 6 1 00 1 1 Actuator Separately 2 3 Actuator Lens Style/Color Opening 4 Actuator Legend 5 Legend Orientation Contura XII actuators without lenses separately: VVP J 1 Z 21 1 00 1 Actuator 2 Style & Color 4 Lens Opening 3 Lens Opening 6 7 Legend Legend Orientation 5 Legend 1 CONTURA X & XI ACTUATOR SEPARATELY VVR 1 CONTURA XII ACTUATOR SEPARATELY VVP 2 ACTUATOR STYLE & COLOR Black Gray 1 2 6 7 2 ACTUATOR STYLE & COLOR J Black K Gray N White M 3,4 LENS OPENING FOR Z No lens 1 Bar lens Square lens Contura X Contura XI 3 LENS OPENING FOR 1 1 One bar lens 2 One bar lenses 3 One square lens 4 two square lens White 3 8 5 Red 4 9 square lens on top/ bar lens on bottom (Contura X only) 5, 7 LENS OR BODY LEGEND 2 00 - No Legend 21 22 OFF ON 4 ACTUATOR LENS OR BODY LEGEND 00 - No Legend this location 11 ON 12 OFF 13 I 14 O OFF ON O I 15 O O 16 O O 17 O I 18 I O F N N F F F For additional legend options & codes, visit us at www.carlingtech.com. 5 LEGEND ORIENTATION 1 0 No legend 1 Orientation 1 2 Orientation 2 3 Orientation 3 4 Orientation 4 1 Lens Separately 2 Color 1 2 3 4 25 O 26 O 27 O 28 I F N F For additional legend options & codes, visit us at www.carlingtech.com. 6 LEGEND ORIENTATION 3 0 No legend 1 Orientation 1 2 Orientation 2 1 2 VVL 2 1 00 0 1 Lens Separately 2 Lens Style 3 Lens Color 4 Legend 1 CONTURA X, XI & XII LENS SEPARATELY VVL 2 COLOR 1 Clear 2 Smoke 2 LENS STYLE 3 1 Bar lens 2 One Piece Square lens 3 Bottom of Two-Piece Square lens 5 top lens actuator stem 24 I 1 TOP OF LENS SEPARATELY VVT 3 White Contura X, XI & XII actuator lens assembly: posts mount toward actuator stem 23 O Contura X, XI & XII actuator lens assembly separately: Contura X, XI & XII top piece of 2-piece lens separately: VVT 1 2 Red bottom lens } 3 TRANSLUCENT LENS COLOR 1 Clear 2 White 3 Amber two piece lens assembly 1 piece lens/bar lens are positioned the same as bottom lens for assembly, minus the top lens. Lenses snap in from bottom. Notes: 1 If actuator lens opening for 2 bar or 2 square lenses, legend orientation 0,1, or 2 must be chosen. 2 Center of actuator marking not available for Contura XII. 3 Legend is not available for bar style lens. 4 Not recommended with neon lamps. 5 Must also order top piece of 2 piece square lens separately. 4 LENS OR BODY LEGEND 2 00 - No Legend 21 22 OFF ON 4 5 Legend Orientation Green 4 23 O 5 Red 6 Blue 4 24 I 25 O 26 O 27 O 28 I F N F For additional legend options & codes, visit us at www.carlingtech.com. 5 LEGEND ORIENTATION 3 0 No legend 1 Orientation 1 2 Orientation 2 3 Orientation 3 4 Orientation 4 1 2 Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793-9281 Fax: (860) 793-9231 www.carlingtech.com 3 4 V-Series Contura Sealed Rocker Switches - Accessories | 11 Easily integrate Contura products into your system, with Contura Accessories Q.C. SELECTION GUIDE PART NO Contura Connectors COMPANY SERIES WIRE RANGE TIN GUIDE PLAIN Q.C. SELECTION AWG PLATED BRASS PART NO BRASS 02965580 COMPANY SERIES ORIENTATION MM 2 (REF) WIRE RANGE 12 3.0 ORIENTIN 02965471 (2)16-14 2GUIDE TATION PLAIN Q.C. SELECTION Q.C.12010601 SELECTION GUIDE Q.C. GUIDE MM(2)1.0-2.0 AWGSELECTION PLATED BRASS 02965470 16-14 (REF) 1.0-2.0 BRASS WIRE WIRE WIRE PART NO PART NO PART NO PACKARD 58 SERIES B RANGE .5-.8 RANGE 02965469 06288318RANGE 02965580 12 20-18 ORIEN3.0 COMPANY COMPANY ORIENTIN TIN 102TIN 5.0 2 12084590 SERIES PLAIN SERIES PLAIN PLAIN TATION TATION 02965471 PLATED 12010601 (2)16-14 (2)1.0-2.0 AWG MM AWG MM AWG MM 2 PLATED PLATED BRASS BRASS12052224 BRASS (REF) 3.0 BRASS BRASS 02965470 BRASS 16-14 12 1.0-2.0(REF) B (REF) COMPANY SERIES PACKARD 58 SERIES 0296558012015870 12 12 16-14 1.0-2.0 06288318 1202965580 20-18 3.0 .5-.8 3.0 PACKARD 02965469 12010601 12010601 12010601 (2)1.0-2.0 02965471 (2)16-14 (2)16-14 02965471 (2)16-14 02965471(2)1.0-2.0 12020035 (2)22-18 (2).5-.8 METRI-PACKPACKARD PACKARD PACKARD 10 1.0-2.0 5.0 B1.0-2.0 12084590 Q.C. SELECTION GUIDE 02965470 02965470 16-14 02965470 16-14 16-14 SERIES58 SERIES 58630 SERIES 58 SERIES 12015869 20-18 .5-.8 12015832 12052224 12 .5-.8 02965469 06288318 02965469 20-18 06288318 02965469 20-18 062883183.0 .5-.8 20-18 02965580 WIRE 12052222 20-22 .35-.5 12015870 16-14 RANGE 1.0-2.05.0 10 5.0 10 10 12084590 12084590 12084590 PACKARD COMPANY ORIENTIN 12052224 12052224 12 (2)22-18 3.012052224 12 3.0 12 2 PLAIN TATION METRI-PACK SERIES 12020035 (2).5-.8 1.3-3 AWG 16-12 MM Q.C. SELECTION GUIDE PLATED 60253-2 60253-1 BRASS 12015870 12015870 12015870 16-14 1.0-2.0 16-14 1.0-2.0 16-14 630PACKARD SERIES AMP BRASS PACKARD PACKARD 12015832 12015869 20-18 (2) .5-.8 (2) 1.3 16 (REF) WIRE 250 SERIES (2)22-18 (2).5-.8 (2)22-18 A (2).5-.8 (2)22-18 12020035 12020035 12020035 METRI-PACK METRI-PACK 02965580 METRI-PACK PART NO 12 3.0 20-22RANGE .35-.5 20-18 630 SERIES 630 SERIES 63012052222 SERIES42100-2 18-14 .8-2 42100-1 FASTIN-FASTON 12015869 12015869 12015869 20-18 20-18 12015832 12015832 12015832 COMPANY ORIEN12010601 (2)16-14.5-.8 (2)1.0-2.0 .5-.8 02965471 TIN PACKARD 2 .35-.5 PLAIN SERIES TATION 16-12 1.3-3 20-22 20-22 20-22 12052222 PLATED 12052222 12052222 60295-2 22-18 .3-.9 60295-1 B 02965470 16-14.35-.5 1.0-2.0 AWG MM 58 SERIES 60253-2 60253-1 BRASS AMP (REF) BRASS 02965469 06288318 20-18 .5-.8 16-12 (2) 161.3-3 16-12 (2) 1.31.3-3 16-12 PART NO ORIENTATION 3.0 (2)1.0-2.0 A B1.0-2.0 .5-.8 B TANG TANG 5.0 TANG SYMBOL = SHOWS ORIENTATION OF TANG IN TANG TANG TANG A 3.0 SYMBOL 1.0-2.0 A(2).5-.8B A .5-.8 TANG SYMBOL = SHOWS ORIENTATION OF TANG IN SLOT .35-.5 SYMBOL TANG SYMBOL =TANGSHOWS SYMBOL =TANG SYMBOL = ORIENTATION SHOWS OFORIENTATION TANG IN SHOWS SLOT OFORIENTATION TANG IN SLOT OF TANG IN SLOT 1.3-3 SYMBOL SYMBOL SYMBOL 60253-2 60253-2 60253-2 60253-1 60253-1 60253-1 250 SERIES AMPConsult Delphi AMP Packard AMP 12084590 NOTE: and/or Amp on actual part numbers and availability. B (2) 1.3 02965580 12 3.0 10 5.0 (2) 16 (2) 1.3 (2) 16 (2) 1.3 (2) 16 FASTIN-FASTON 42100-1 trademark 42100-2 18-14 .8-2 B 250 SERIES SERIES 250 SERIES B B AMP is 250 a registered of AMP Inc. Harrisburg, PA TANG 12010601 (2)16-14 (2)1.0-2.0 12052224 12 3.0 18-14 .8-218-14 .8-218-14 .8-2 42100-2 42100-2 42100-2 FASTIN-FASTON FASTIN-FASTON 42100-1 02965471 42100-1 42100-1 Delphi Packard is a FASTIN-FASTON registered trademark of Delphi-Packard Systems Warren, Ohio PACKARD 60295-1 60295-2 22-18 .3-.9 Electrical B 16-14 1.0-2.0 12015870 16-14 .3-.9 1.0-2.0 22-18 22-18 .3-.9 22-18 .3-.9 60295-2 60295-2 60295-2 60295-1 02965470 60295-1 60295-1 58 SERIES PACKARD 02965469 METRI-PACK 06288318 12020035 20-18 (2)22-18 .5-.8 (2).5-.8 SLOT A NOTE: Delphi Packard and/or Amp on actual part numbers and availability. .820[20.83] 630 SERIES NOTE:Consult Consult Delphi NOTE: Packard Consult and/or Delphi NOTE: Amp Packard Consult on actual and/or Delphi part Amp numbers Packard on actual and/or and part availability. Amp numbers on actual and part availability. numbers and availability. 12015869 20-18 .5-.8 12015832 10 5.0 12084590 .820[20.83] AMP a registered registered trademark oftrademark AMP Inc.ofHarrisburg, PA AMP is is a AMP trademark is a registered of AMP AMP Inc. is Harrisburg, a registered AMP PA trademark Inc. Harrisburg, of AMP PAInc. Harrisburg, PA TANG 12052224 12of 3.0 of 20-22 .35-.5 12052222 Delphi Packard Packard is is Delphi a registered Packard trademark is trademark Delphi a registered ofPackard Delphi-Packard trademark is a registered Electrical Delphi-Packard trademark Systems Electrical Warren, Delphi-Packard Systems Ohio Warren, Electrical Warren, Ohio Systems Ohio ORIENTATION OF TANG IN SLOT Delphi a registered of Delphi-Packard Electrical Systems TANGOhio SYMBOL Warren, = SHOWS 12015870 16-14 1.0-2.0 16-12 1.3-3 PACKARD SYMBOL 60253-2 60253-1 AMP .820[20.83] .820[20.83] (2)22-18 (2).5-.8 A METRI-PACK (2) 16 (2) 1.3 .820[20.83] .820[20.83] .820[20.83]12020035 .820[20.83] 250.820[20.83] SERIES B 630 SERIES .820[20.83] 12015869 20-18 .5-.8 12015832 18-14 .8-2 42100-2 FASTIN-FASTON 42100-1 20-22 .35-.5 12052222 22-18 .3-.9 60295-2 60295-1 TANG SYMBOL = SHOWS ORIENTATION OF TANG IN SLOT 16-12 1.3-3 SYMBOL NOTE: AMP Consult Delphi Packard Amp on actual part numbers and availability. 60253-1and/or60253-2 .770[19.56] (2) 16 PA (2) 1.3 AMP is a registered trademark of AMP Inc. Harrisburg, 250 SERIES Delphi Packard is a registered trademark Electrical Systems B Warren, Ohio 18-14 .8-2 42100-2 of Delphi-Packard FASTIN-FASTON 42100-1 .920[23.37] 60295-1 A .920[23.37] .820[20.83] .920[23.37] A A B B AMP, PACKARD AMP, PACKARD 58 PACKARDPACKARD 630 630 PACKARD 630 VC1 .820[20.83] .920[23.37] .920[23.37] .920[23.37] 58 VC1 PACKARD 630 VC1 VC1 B .820[20.83] A AMP, 58 AMP, PACKARD 58 AMP, PACKARD AMP, PACKARD 58 58 PACKARD AMP, PACKARD 58 B B VC1 B VC2 PACKARD 630 B VC1 1.266[32.16] .920[23.37] AMPAMP, PACKARD 58 AMP A VC2 VC2 .820[20.83] 1.266[32.16] 1.466[37.24] 1.266[32.16] 1.466[37.24] 1.266[32.16] AMP AMPAMP .920[23.37] B 1.466[37.24] 1.266[32.16] 1.266[32.16] 1.170[29.72] VC2 AMP 1.466[37.24] 1.266[32.16] 5 AMP PACKARD 630 VC2 B AMP AMP, PACKARD 58 679 VC2 4 73 45 2 1.466[37.24] A VC2 69 15 8 6 9 A PACKARD 630 .770[19.56] .950[24.13] B .770[19.56] .770[19.56] 1.170[29.72] A VC2 B .920[23.37] VC2 10 10 3 23 1VC1 1053 630 6729 417VC1 845 56 96 9 10 73 4 2 51 689 10 10 3 3 2 128 1 7104 8 3 5 2 619 8 7 4 28 10 1 38 2 1 784PACKARD PACKARD 630 B .3-.9 .920[23.37] NOTE: Consult Delphi Packard and/or Amp on actual partAnumbers and availability. AMP is a registered trademark of AMP Inc. Harrisburg, PA VC2 A A A A A .920[23.37] .920[23.37] PACKARD 630 Delphi Electrical Systems Warren, Ohio VC1Packard is a registered trademark of Delphi-Packard VC1 PACKARD 630 PACKARD 630 22-18 60295-2 .770[19.56] .770[19.56] 1.170[29.72] 1.170[29.72] A A 1.170[29.72] PACKARD 630 PACKARD 630 .950[24.13] .950[24.13] .950[24.13] PACKARD 630 B A B B B AMP, 58 PACKARD 58AMP, PACKARD 58 AMP, PACKARDPACKARD 58 AMP, AMP, PACKARD PACKARD 58 630 8 7 3 4 235 1 62 8 1.466[37.24] 1.250[31.75] B 1.250[31.75] 3 2 1 1 87 4 .950[24.13] 1.170[29.72] A A PACKARD PACKARD 630 630 5 A 6 B AMP, PACKARD PACKARD 630 58 7 4 5 B 6 PACKARD 630 AMP, PACKARD 58 AMP 1.266[32.16] 1.466[37.24] .770[19.56] 1.250[31.75] AMP, PACKARD 58 AMP, PACKARD 58 10MARKING 3 2 DETAIL 1A 8 MARKING DETAIL 7MARKING 4DETAIL 5DETAIL 69 A 10 3 VC22 1 DETAIL 8 7 4 5 6MARKING 9 MARKING 3 2MARKING 1 8 DETAIL 7 4 5DETAIL 6 MARKING MARKING DETAIL MARKING MARKING DETAIL DETAIL MARKING MARKING DETAIL MARKING DETAIL DETAIL DETAIL MARKING DETAIL MARKING DETAIL MARKING DETAIL MARKING AMP, PACKARD 58 PACKARD 630 FRONT VIEWB MARKING VC1 FRONT VIEW DETAIL 1.266[32.16] FRONT VIEW AMP, PACKARD 58 1.466[37.24] AMP, PACKARD 58 PACKARD 630 VC1 REARFRONT VIEW VIEW REAR B VIEW MARKING DETAIL .920[23.37] 1.466[37.24] REAR VIEW AMP, PACKARD 58 8 7 4 5 69 VC1 10 3 2 1 VC1 VC1 CONNECTOR HOUSING CONNECTOR HOUSING CONNECTOR HOUSING A MARKING DETAIL MARKING DETAIL A 1.266[32.16] 1.466[37.24] VC1 PACKARD 630 PACKARD 630 VC1 FRONT VIEW REAR VIEW VC1 B CONNECTOR HOUSING MARKING DETAIL FRONT VIEW AMP, PACKARD 58 VC1 10 3 2 1 8 VC1 CONNECTOR HOUSING 1.266[32.16] CONNECTOR HOUSING MARKING DETAIL FRONT VIEW AMP B MARKING DETAIL REAR VIEW AMP, PACKARD 58 7 4 5 FRONT REAR VIEW VIEW DETAIL VC2 A PACKARD 630 REAR VIEWMARKING FRONT REAR VIEW VIEW .950[24.13] FRONT VIEW DETAIL 1.466[37.24] REAR VIEW B AMP 1.170[29.72] B CONNECTOR HOUSING MARKING DETAIL (For AMP terminals only) REAR VIEW 10 3 2 1VC2 8 7 4 5 69 CONNECTOR HOUSING VC2 1.266[32.16] 1.466[37.24] CONNECTOR (For AMP HOUSING terminals only) MARKING DETAIL FRONT VIEW AMP 69 AMP (For AMP terminals only) MARKING DETAIL FRONT VIEW 1.050[26.67] 1.050[26.67] VC2 CONNECTOR HOUSING (For AMP terminals only) MARKING DETAIL REAR VIEW AMP, PACKARD 58 MARKING DETAIL B FRONT AMP, PACKARDVIEW 58 3 2 1 8 4 REAR FRONT VIEW VIEW MARKING REAR VIEW DETAIL 1.250[31.75] FRONT VIEW REAR VIEW MARKING AMP, PACKARD 58 MARKING DETAIL REAR VIEW CONNECTOR HOUSING MARKING DETAIL B REAR VIEW AMP, PACKARD 58 VCH 7 4 5 6 HOUSING VCH CONNECTOR 1.250[31.75] CONNECTOR HOUSING MARKING DETAIL FRONT VIEW MARKING DETAIL REAR VIEW 1 VCH CONNECTOR HOUSING .4VA @ 28VDC Resistive VAC 1/2 HP, No Agency Listings 10A 250VAC 1/2 HP, 15A 125 VAC 1/2 HP, UL Recognized, CSA Certified B 15A 24V 1.050[26.67] C VB1-01 20A 18V VB1-01 CONTURA X BOOT 2.000[50.80] .757[19.23] .757[19.23] D 20A 12V CONTURA X BOOT 2.000[50.80] 1.050[26.67].757[19.23] VB1-01 E 20A 14V, 10A 14VT (circuits 1, 4, A, & D only) 2.000[50.80] CONTURA X BOOT F VB1-01 10A 14V, 6A, 14VT (circuit G only) 2.000[50.80] CONTURA X20A BOOT6V G .757[19.23] H 20A 3V .757[19.23] 15A 125 VAC, 10A 250VAC, 1/2 HP 125-250 VAC; 6A 125 VAC L L2 3.99 [101.35] 3.99 [101.35] .757[19.23] 3.99 [101.35] M .4VA/20A 12V (combi-contact) .757[19.23] (combination gold/silver contacts for borderline dry circuit applications) VRT VRT VRT ACTUATOR ACTUATOR ACTUATOR REMOVAL N REMOVAL .4VA/15AREMOVAL 24V (combi-contact) 3.99 [101.35] .900 [22.86] .900 [22.86] .900 [22.86] TOOL TOOL TOOL (combination gold/silver contacts for borderline dry circuit applications) (For flush bracket) (For flush bracket) (For flush bracket) 2.000[50.80] 2.000[50.80] 1.050[26.67] 2.000[50.80] 1.050[26.67] Contura II, III, IV, V, VI & VII Actuator Removal Tool (P/N VRT) VB1-01 VB1-01 4VB1-01 10A 250VAC 1/2 HP, 15A 125 CONTURA X BOOT CONTURA X BOOT CONTURA X BOOT TOP TOP TOP TOP TOP INSERT POINTS UNDER ACTUATOR HOLD FLUSH ON BRACKET AND PUSH IN 3.99 [101.35] TOP .900 [22.86] 3.99 [101.35] 3.99 [101.35] TOP .900 [22.86] TOP TOP INSERT POINTS UNDER TOP ACTUATOR INSERT HOLD POINTSFLUSH UNDER ON BRACKET AND PUSH IN ACTUATOR HOLD FLUSH ON BRACKET AND PUSH TOP IN TOP VRT ACTUATOR REMOVAL TOOL NOTES (For flush bracket) Consult factory to determine availability for individual circuits and their HP rating. TOP INSERT POINTS UNDER ACTUATOR HOLD FLUSH ON BRACKET AND PUSH IN 51 TOP INSERT POINTS UNDER INSERT POINTS UNDER INSERT POINTS UNDER ACTUATOR ACTUATOR ACTUATOR HOLD FLUSH ON BRACKET ANDHOLD PUSH FLUSH ON BRACKET AND HOLD PUSH FLUSH ON BRACKET AND PUSH IN IN IN 1. VRT Not available with Contura 7 or 14 rocker styles. ACTUATOR REMOVAL VRTcircuits 1, 4, A & D only. 2. TOOL Rating L available with (For flush bracket) ACTUATOR REMOVAL VRT .900 [22.86] .900 [22.86] 6 DETAIL REAR VIEW Additional V-Series Ratings 1.050[26.67] 5 PACKARD 630 10 3 2 1 8 VC2 7 VC2 4 5 69 VCH VC2 VCH 3 VCH 2 1 8 7 4 5 6 CONNECTOR HOUSING CONNECTOR HOUSING CONNECTOR HOUSING CONNECTOR HOUSING CONNECTOR HOUSING CONNECTOR HOUSING A A MARKING DETAIL MARKING DETAIL MARKING DETAIL VCH 1.250[31.75] 1.266[32.16] 1.466[37.24] PACKARD 630 PACKARD 630 (For AMP terminals (For AMP terminals only) (Foronly) AMP terminals only) VC2 VC2 VC2 FRONT VIEW REAR VIEW FRONT VIEW .950[24.13] Contura X Boot (P/N VB1-01) VC1 CONNECTOR HOUSING FRONT VIEW MARKING 1.266[32.16] .920[23.37] FRONT VIEW AMP 1.466[37.24] MARKING DETAIL REAR VIEW A FRONT REARVIEW VIEW 7 1.250[31.75]B TOOL ACTUATOR REMOVAL (For flush bracket) TOOL (For flush bracket) Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793-9281 Fax: (860) 793-9231 www.carlingtech.com 12 | V-Series Contura Sealed Rocker Switches - Accessories Contura Mounting Panels Dimensional Specifications: in. [mm] Contura Hole Plug Dimensional Specifications: in. [mm] 1.450 [36.83] .830 [21.08] TEST CUT HOLE IN ACTUAL MATERIAL VHP CONTURA II,III HOLE PLUG 1.240 [31.50] 1.820 [46.23] .430 [10.92] VHP CONTURA II,III HOLE PLUG VH1 STANDARD HOLE PLUG (No wing serrations) (With VC1 connector attached) 2.000 [50.80] VH2 STANDARD HOLE PLUG (With wing serrations) 1.067 [27.10] 1.928 [48.97] VH3 CONTURA IV HOLE PLUG (No wing serrations) VH4 CONTURA IV HOLE PLUG (With wing serrations) DETAIL VIEW VH1,VH3 & VH5 HOLE PLUGS (No wing serrations for ease of removal) 1.020 [25.91] VH5 CONTURA V HOLE PLUG (No wing serrations) VH6 CONTURA V HOLE PLUG (With wing serrations) DETAIL VIEW VH2,VH4 & VH6 HOLE PLUGS (With wing serrations) Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793-9281 Fax: (860) 793-9231 www.carlingtech.com Reps & Contact | 13 Authorized Sales Representatives and Distributors Click on a region of the map below to find your local representatives and distributors or visit www.carlingtech.com/findarep. CANADA EUROPE USA MIDDLE EAST MEXICO AFRICA ASIA-PACIFIC OCEANIA SOUTH AMERICA About Carling Founded in 1920, Carling Technologies is a leading manufacturer of electrical and electronic switches and assemblies, circuit breakers, electronic controls, power distribution units, and multiplexed power distribution systems. With four ISO registered manufacturing facilities and technical sales offices worldwide, Carling Technologies Sales, Service and Engineering teams do much more than manufacture electrical components, they engineer powerful solutions! To learn more about Carling please visit www.carlingtech.com/company-profile. To view all of Carling's environmental, quality, health & safety certifications please visit www.carlingtech.com/environmental-certifications Email: sales@carlingtech.com Application Support: team2@carlingtech.com Phone: (860) 793-9281 Fax: (860) 793-9231 www.carlingtech.com Worldwide Headquarters Carling Technologies, Inc. 60 Johnson Avenue, Plainville, CT 06062 Phone: 860.793.9281 Fax: 860.793.9231 Email: sales@carlingtech.com Northern Region Sales Office: nrsm@carlingtech.com Southeast Region Sales Office: sersm@carlingtech.com Midwest Region Sales Office: mrsm@carlingtech.com West Region Sales Office: wrsm@carlingtech.com Latin America Sales Office: larsm@carlingtech.com Asia-Pacific Headquarters Carling Technologies, Asia-Pacific Ltd., Suite 1607, 16/F Tower 2, The Gateway, Harbour City, 25 Canton Road, Tsimshatsui, Kowloon, Hong Kong Phone: Int + 852-2737-2277 Fax: Int + 852-2736-9332 Email: sales@carlingtech.com.hk Shenzhen, China: shenzhen@carlingtech.com Shanghai, China: shanghai@carlingtech.com Pune, India: india@carlingtech.com Kaohsiung, Taiwan: taiwan@carlingtech.com Yokohama, Japan: japan@carlingtech.com Europe | Middle East | Africa Headquarters Carling Technologies LTD 4 Airport Business Park, Exeter Airport, Clyst Honiton, Exeter, Devon, EX5 2UL, UK Phone: Int + 44 1392.364422 Fax: Int + 44 1392.364477 Email: ltd.sales@carlingtech.com Germany: gmbh@carlingtech.com France: sas@carlingtech.com www.carlingtech.com REV_11_2017