ETC1-1-10TR - M/A-COM Technology Solutions

E-Series RF 1:1 Transformer

1710 – 1910 MHz V1

ETC1-1-10

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and prod uct information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to

the product(s) or information contained herein without notice.

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Features

• 1:1 Impedance Ratio

• Surface Mount

• Tape and reel packagi ng available

Description

M/A-COM’s ETC1-1-10 is a 1:1 RF transmission line

transformer in a low cost, surface mount package.

Ideally suited for high volume cellular and wireless

applications. Parts are packaged in tape & reel.

Ordering Information

Part Number Package

ETC1-1-10TR Tape and Reel (2000 piece Reel)

SM - 22 Package

Electrical Specifications: TA = 25°C, Z0 = 50 Ω 1

Parameter Test Conditions Frequency Units Min Typ Max

RF Frequency — 1710 - 1910 MHz — — —

Insertion Loss FL—fU 1710 - 1910 dB — — 2.0

Amplitude Unbalance — 1710 - 1910 dB — — 2.0

Phase Unbalance — 1710 - 1910 Degrees — — 10°

Absolute Maximum Ratings 1

1. Operation of this device above any one of these parameters

may cause permanent damage.

Parameter Absolute Maximum

DC Power 250 mW

DC Current 30 mA

Operating Temperature -40°C to +85°C

Storage Temperature -55°C to +125°C