4 / 8 WizFi360io-H Datasheet
1. Overview
This document describes WizFi360io-H. The form factor of WizFi360io-H is an Xbee inter
face module. 2.00mm pin header is used, similar to the Xbee pin layout. But it is not e
xactly compactible.
WizFi360 is a low cost and low-power consumption industrial-grade WiFi module. It is c
ompatible with IEEE802.11 b/g/n standard and supports SoftAP, Station and SoftAP+Stati
on modes. The serial port baud rate can be up to 2Mbps, which can meet the require
ment of various applications.
2. Features
2.1. WizFi360
⚫ WiFi 2.4G, 802.11 b/g/n
⚫ Support Station / SoftAP / SoftAP+Station operation modes
⚫ Support “Data pass-through” and “AT command data transfer” mode
⚫ Support serial AT command configuration
⚫ Support TCP Server / TCP Client / UDP operating mode
⚫ Support configuration of operating channel 0 ~ 13
⚫ Support auto 20MHz / 40MHz bandwidth
⚫ Support WPA_PSK / WPA2_PSK encryption
⚫ Serial port baud rate up from 600bps to 2Mbps with 16 common values
⚫ Support up to 5 TCP / UDP links
⚫ Obtaining IP address automatically from the DHCP server (Station mode)
⚫ DHCP service for Wireless LAN clients (AP mode)
⚫ Support DNS for communication with servers by domain name
⚫ Support “Keep-Alive” to monitor TCP connection
⚫ Support “Ping” for monitoring network status
⚫ Built-in SNTP client for receiving the network time
⚫ Support built-in unique MAC address and user configurable
⚫ Support firmware upgrade by UART Download / OTA (via WLAN)
⚫ Industrial grade (operating temperature range: -40 °C ~ 85 °C)
⚫ CE, FCC, KC certification
2.2. ETC
⚫ 3.3V Operating Voltage