Signal Relays AXICOM P2 Relay V23079 Standard telecom relay (ringing and test access) Slim line 15x7.5mm (.590x.295") n Max. switching current 5A n 2 form C bifurcated contacts (2 changeover contacts, 2 CO) n Immersion cleanable n High sensitivity for low power consumption 140mW/ 70mW n Single coil version with surge voltage resistance between contact and coil: 2.5kV (2/10s) meets the Telcordia Requirement GR-1089, 1.5kV (10/160s) meets FCC Part 68 Typical applications Communications equipment linecard application (ringing and test access), PABX, voice over IP, office equipment, measurement and control equipment, automotive equipment as CAN bus, keyless entry, speaker switch, medical equipment, consumer electronics, set top boxes, HiFi n n P2 V23079 Relay Z Coil Operating Range Magnetic system Coil voltage3.4range 3.2 Max. coil temperature 3 Thermal resistance 2.8 Technical data of approved types on request 2 form C (CO) 220VDC, 250VAC 2A 2A 60W, 62.5VA AgNi, gold-covered bifurcated contact 100V <10V <50m at 10mA, 20mV 50 operations/s typ. 2ms, max. 4ms typ. 2ms, max. 4ms Coil Voltage [U/Unom] UL 508 File No. E 111441, UL 60950, IEC/EN60950 IEC Ref. Cert. No. 327 polarized 70 mW 2 to 24VDC 125C Umax. at 0 A <Umax. 125K/W at 2 x 1 A Umax. at 2 x 2 A 2.6 N Umax. = U th co All figures are given for coil without pre-energization, at ambient temperature +23C. Other coil voltages on request. typ. 2ms, max. 4ms typ. 4ms, max. 6ms typ. 1ms, max. 3ms 140 mW 2.8 2.6 Umax. at 0 A Umax. at 2 x 1 A Umax. at 2 x 2 A 2.4 typ. 5x107 operations typ. 1x107 operations typ. 5x105 operations typ. 1x106 operations typ. 2x105 operations 110VDC / 0.3A - 33W 30VDC / 2.0A - 60W 120VAC / 0.5A - 60VA 240VAC / 0.25A -60VA typ. 100x106 operations Unom = 2.4 Coil versions, monostable 2.2 Coil Rated Operate Limiting Release Coil Rated coil 2 code voltage voltage Voltage voltage resistance power 1.8 1.6VDC VDC VDC VDC 10% mW Uop. min. = Lo th 1.43.00 008 2.25 6.50 0.30 64 140 1.2 016 4.00 3.00 8.70 0.40 114 140 U nom. nominal coil voltage 1 Fo 011 4.50 3.38 9.80 0.45 145 140 0.8 001 5.00 3.75 10.90 0.50 178 140 Uop. min. 0.6 002 4.50 13.00 0.60 257 140 Urel. min. = Lo 0.46.00 th 0.29.00 006 6.75 19.60 0.90 578 140 0 003 12.00 9.00 26.15 1.20 1029 140 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 005 24.00 18.00 52.30 2.40 4114 140 Ambient Temperature [C] 2.2 Coil Voltage [U/Unom] Contact arrangement Max. switching voltage Rated current Limiting continuous current, 85C Switching Power Contact material Contact style Minimum switching voltage Thermoelectrical potential Initial contact resistance Frequency of operation, without load Operate time Set/reset time Release time without diode in parallel with diode in parallel Bounce time Electrical endurance at 12V / 10mA at 6V / 100mA at 60V / 500mA at 30V / 1000mA at 30V / 2000mA Contact ratings, UL Mechanical endurance Telecom-, Signal and RF Relays Coil Data Approvals Contact Data AXICOM 2 1.8 1.6 1.4 1.2 1 Unom. nominal coil voltage 0.8 Uop. min. Urel. min. 0.6 0.4 0.2 Max. DC load breaking capacity 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 Ambient Temperature [C] 200 mW 2.8 Umax. at 0 A Umax. at 2 x 1 A Umax. at 2 x 2 A 2.6 2.4 DC current [A] 09-2012, Rev. 0912 www.te.com (c) 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Coil Voltage [U/Unom] DC voltage [VDC] 2.2 2 1.8 1.6 1.4 1.2 1 Unom. nominal coil voltage 0.8 Uop. min. Datasheets,Uproduct rel. min. data, `Definitions' section, application notes and all specifications are subject to change. 0.6 Datasheets and0.4product data is subject to the terms of the disclaimer and all chapters of 0.2 the `Definitions' 0section, available at -40 -30 -20 -10 0 10 20 30 40 50 http://relays.te.com/definitions 60 70 80 90 100 110 120 130 140 Ambient Temperature [C] 1 Signal Relays AXICOM P2 Relay V23079 (Continued) Coil Data (continued) Insulation Data Standard HDV Coil Voltage [U/Unom] Coil Voltage [U/Unom] Coil Voltage [U/Unom] Coil Voltage [U/Unom] Initial dielectric strength between open contacts 1000Vrms 1500Vrms Coil versions, bistable between contact and coil 1500Vrms 1500Vrms Coil Rated Set Limiting Reset Coil Rated coil between adjacent contacts 1000 Vrms code voltage voltage Voltage voltage resistance power 1500Vrms VDC VDC VDC VDC 10% mW Initial surge withstand voltage Bistable, 1 coil according to Telcordia TR-NWT-001089 (2/10s) AXICOM 108 3.00 2.25 9.2 -2.25Signal and128 70 between open contacts 2000V Rev. E 2500V Telecom-, RF Relays 108-98002 111 4.50 3.38 13.85 -3.38 289 70 between contact and coil 2500V 2500V 101 5.00 3.75 15.33 P2 -3.75 357 Relay 70 between adjacent contacts 2500V 2500V V23079 102 6.00 4.50 18.5 -4.50 514 70 according to (10/700 s IEC 60950) 106 9.00 6.75 27.75 -6.75 1157 70 between open contacts 2000V 2500V 103 12.00 9.00 37 -9.00 2057 70 between contact and coil 2500V 2500V Operating 105 Coil 24.00 18.00 Range 74 -18.00 8228 70 between adjacent contacts 2500V 2500V Bistable, 2 coil Initial insulation resistance at 500 Vdc > 109 219 2.00 1.50 4.33 1.50 28 140 Capacitance 3.4 218 2.40 1.80 5.2 1.80 140 between open contacts max. 1pF 70 41 mW AXICOM U Nominal coil voltage 3.2 nom = 208 3.00 2.25 6.5 2.25 64 140 between contact and coil max. Telecom-, Signal and RF Relays 108-98002 Rev. 2pF E 3 Umax. at 0 A 211 4.50 3.38 9.8 3.38 Umax. at 2145 140 contacts max. 1.5pF 2.8 Upperadjacent limit of the operative range of Umax. = between x1A 201 5.00 3.75 10.9 140 Clearance /creepage 2.6 Umax. at 2178 x 2 ARelay P23.75 V23079 the coil to voltage (limiting voltage) when coils are 2.4 202 6.00 4.50 13 4.50 257 140 according IEC / EN 60950 1.3/2.5mm 2.2 continously energized 206 9.00 6.75 19.6 6.75 578 140 2 203 12.00 9.00 26.15 9.00 1029 140 1.8 Uop. min. = Lower limit of the operative range of Operating 205 Coil 24.00 18.00 Range 52.3 18.00 4114 140 Other Data 1.6 All figures are given for coil without pre-energization, at ambient temperature +23C. thecompliance: coil voltageEU (reliable operate voltage) Material RoHS/ELV, China RoHS, REACH, Halogen content 1.4 Other coil voltages on request. 1.2 refer to the Product Compliance Support Center at 1 Unom. nominal coil voltage 3.4 U resp. Ureset min. For latching relays www.te.com/customersupport/rohssupportcenter 70 mW Unom = Nominal coil voltage set min. 3.2 0.8 Ambient temperature -40 to +85C Uop. min. 3 0.6 Umax. at 0 A U min. = Lower limit of the operative range of Category of environmental protection 2.8 0.4 = Upper limit of the operative range of Urel. Umax. at 2 x 1 A max. coil voltage (reliable release voltage) IECthe 61810 RT III - wash tight 2.6 0.2 Umax. at 2 x 2 A theofcoil voltage IEC (limiting voltage) when coils IP are 0 2.4 Degree protection, 60529 67 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 2.2 continously energized Vibration resistance (functional) 35g, 10 to 1000Hz 2 Ambient Temperature [C] Shock resistance (functional) 1.8 Uop. min.IEC = Lower limit of (half the operative range of 60068-2-27 sine) 50g 1.6 the type coil voltage (reliable operate voltage) PCB-THT, Terminal 1.4 1.2 2.8 SMT long and short terminals 140 mW 1 2.6Unom. nominal coil voltage For latching relays Uset min. resp. Ureset min.max. 2.8 g Weight Umax. at 0 A 0.8 2.4 Resistance to soldering heat THT Umax. at 2 x 1 A Uop. min. 0.6 Urel. min.IEC = Lower limit of the operative range of Umax. at 2 x 2 A 2.2 60068-2-20 265C/10s 0.4 the coil (reliable release voltage) Resistance to voltage soldering heat SMT 0.2 2 0 1.8 IEC 60068-2-58 see Resistance to soldering heat -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 1.6 Moisture sensitive level, JEDEC J-Std-020D MSL3 Ambient Temperature [C] Ultrasonic cleaning not recommended 1.4 Packaging/unit Coil versions,1.2 high dielectric version, monostable, overmolded Unom.Operate nominal coil voltage THT box/2000 pcs. Coil Rated Limiting Release Coil Rated coil 1 2.8 SMT reel/2000 pcs. or 2500 pcs. code voltage voltage Voltage Voltage resistance 0.8 140 mW power 2.6 VDC VDC VDC VDC 10% mW 0.6 Umax. at 0 A Uop. min. 2.4 008 3.00 2.25 6.1 0.30 200 Umax. at45 2x1A 0.4 Urel. min. 2x2A 2.2 001 5.00 3.75 10.1 0.50 Umax. at 125 200 0.2 2 002 6.00 4.50 12.1 0.60 180 200 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 1.8 006 9.00 6.75 18.2 0.90 405 200 Ambient Temperature [C] 1.6 003 12.00 9.00 24.2 1.20 720 200 All figures are given 1.4 for coil without pre-energization, at ambient temperature +23C. Other coil voltages 1.2 on request. Unom. nominal coil voltage 1 200 mW 2.8 2.6 2.4 2 Coil Voltage [U/Unom] Coil Voltage [U/Unom] 2.2 2 1.8 0.8 Umax. at 0 A Uop. min. Umax. at 2 x 1 A Urel. min. Umax. at 2 x 2 A 0.6 0.4 0.2 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 Ambient Temperature [C] 1.6 1.4 1.2 1 Unom. nominal coil voltage 200 mW 2.8 0.8 Umax. at 0 A Uop. min. Umax. at 2 x 1 A Urel. min. Umax. at 2 x 2 A 2.6 0.6 2.4 0.4 2.2 0.2 2 0 1.8 1.6 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 Ambient Temperature [C] 1.4 09-2012, Rev. 1.2 0912 Datasheets and product data is subject to the Datasheets and product specification Unom. nominal coil voltage according to IEC 61810-1 and to be used www.te.com 1 terms of the disclaimer and all chapters of (c) 2012 Tyco Electronics Corporation, the `Definitions' section, available at only together with the `Definitions' section. 0.8 All specifications subject to change. Consult Tyco Electronics for latest specifications.http://relays.te.com/definitions a TE Connectivity Ltd. company 0.6 Uop. min. 0.4 Urel. min. 0.2 0 Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change. 5 of 15 Signal Relays AXICOM P2 Relay V23079 (Continued) Terminal assignment TOP view on component side of PCB Monostable version Bistable version, 1-coil Bistable version, 2-coils Contacts are shown in reset condition. Both coils can be used as either set or reset coils. Contact position might change during transportation and must be reset before use. PCB layout TOP view on component side of PCB THT version SMT, long terminals SMT, short terminals 0,9 0,1 Dimensions Overmolded coil, high dielectric version THT version 0.50.05 0.50.05 14.60.17.20.1 7.20.1 3.25-0.25 3.25-0.25 3.25-0.25 3.25-0.25 09-2012, Rev. 0912 www.te.com (c) 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. company 0.50.05 0.50.05 0.50.05 0.50.05 0.50.05 0.50.05 Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. 0.50.05 5.52 7 5.52 7.40.15 5.52 0.50.05 7.40.15 7.40.15 5.52 7.40.15 7.40.15 7.40.15 7.20.1 14.60.1 14.60.1 14.60.17.20.1 7.20.1 7.20.1 14.60.1 14.60.1 14.60.17.20.1 7.20.1 9.90.19.90.1 14.60.1 14.60.1 9.90.1 9.90.1 7.20.1 9.90.1 9.90.1 7.20.1 14.60.17.20.1 9.50.19.50.1 3.25-0.25 3.25-0.25 14.60.1 14.60.1 9.50.1 9.50.1 7.20.1 9.50.1 0.45 9.50.1 0.45 14.60.17.20.1 0.45 0.45 14.60.1 14.60.1 0.50.05 7.20.1 7 SMT, short terminals 7.20.1 0.50.05 0.50.05 14.50.17.20.1 SMT, long terminals 14.60.1 7.20.1 7.20.1 0.50.05 14.50.1 14.50.1 5.520.15 5.520.155.520.15 0.50.05 0.50.05 9.40.15 9.40.15 9.40.15 5.520.155.520.15 5.520.15 0.50.05 0.50.05 9.40.15 9.40.15 9.40.15 14.60.1 14.60.1 0.50.05 0.50.05 7.20.1 5.52 5.52 0.50.05 0.50.05 5.52 9.40.15 9.40.15 9.40.15 5.52 5.52 5.52 0.50.05 0.50.05 9.40.15 9.40.15 9.40.15 Datasheets and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions 0.50.05 5.52 9.90.15 9.90.15 0.50.05 0.50.05 10.40.15 10.40.15 0.50.05 0.50.05 7.20.1 9.90.15 9.90.15 0.50.05 9.80.19.80.1 3.25-0.25 3.25-0.25 9.80.1 9.80.1 0.50.05 0.50.05 3.25-0.25 3.25-0.25 0.50.05 3.25-0.25 3.25-0.25 0.50.05 0.50.05 14.50.17.20.1 10.40.15 10.40.15 7.20.1 14.50.17.20.1 SMT, short14.50.1 terminals 14.50.1 10.40.15 10.40.15 14.50.1 14.50.1 7.20.1 10.40.15 10.40.15 7.20.1 7.20.1 14.50.17.20.1 10.40.15 10.40.15 14.50.1 14.50.1 10.40.15 10.40.15 7.20.1 9.80.1 9.80.1 0.55-0.15 0.55-0.15 14.50.17.20.1 14.50.1 14.50.1 SMT, long terminals 0.55-0.15 0.55-0.15 7.20.1 9.90.15 9.90.15 Standard coil 14.50.1 14.50.1 14.50.1 7.20.1 THT version 7.20.1 7 7 5.52 7.40.15 5.52 0.50.05 7.40.15 7.40.15 5.52 7.40.15 7.40.15 7.40.15 Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change. 3 5 Signal Relays AXICOM P2 Relay V23079 (Continued) Processing Recommended soldering conditions Vapour phase soldering 20 to 40s 240C Resistance to soldering heat full line: typical dotted line: process limits Infrared soldering temperature/time profile (lead and housing peak temp.) forced cooling 130C external preheating 100C Vapour phase soldering temperature/time profile (lead and housing peak temp.) Temperature [C] Temperature [C] 180C Time [s] Time [s] Recommended reflow soldering profile Infrared soldering Temperature [C] temperature/time profile (lead and housing peak temp.) Time [s] Packing Reel dimensions 4 09-2012, Rev. 0912 www.te.com (c) 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change. 2:1 25.05.1998 PH 9122 REVISION RECORD DATE DWN C23303-A079-C120 - ANGLES 5 - ANGLES - 2 PLC 3 PLC 4 PLC 4 SCALE A3 DRAWING NO C23303-A079-C121 3 2 0.6 roztec transportnich otvoru distance of transport holes roztec transportnich otvoru 1.5 distance of transport holes 4x10=400.2mm 1.5 4x11=440.2mm 4x10=400.2mm 4x12=480.2mm 4x11=440.2mm 4x12=480.2mm P 7 - 7 - 1 - LTR - 7 - 1 - REVISION RECORD P 6 LTR max. ZC Zdenek Curda TOLERANCES UNLESS OTHERWISE SPECIFIED: 9193 9121 25.05.1998 9188 9151 DATE DWN 5 REVISION RECORD 7 6 mm PH 13.12.2005 26.3.2012 DWN 120.15 26.3.2012 8 4.50.2 10.9+0.3 0 R0.3 26.3.2012 ANGLES - 13.12.2005 - APVD SURFACE TEXTURE 25.05.1998 DATE 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ZC 0.1 0.01 PH0.001 0.0001 9188 9151 DWN - 0.6 26.3.2012 7 - 17.06.2011 ZC 9122 1 - 25.05.1998 9188 9151 LTR REVISION RECORD Petr Hofman OTHERWISE SPECIFIED: mm APVD 0 PLC P2L2/P2L3/FU2 --0.1Blister tape short terminals Petr Hofman 1 PLC SIZE 2 PLC 3 PLC 4 PLC - A3 3 DRAWING NO 2 - 4 SHEET 0.01 NAME 0.001 C23303-A079-C120 0.0001 SIZE A3 4:1 B DWN 5 DIST P C 8 - 2 - 17.06.2011 PH 9122 1 - 25.05.1998 PH 9122 LTR REVISION RECORD A-A DATE 10.9+0.3 0 PH ANGLES 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC - OF 1 3 . 3 40.2 40.1 A max. 3 9.10.2 roztec transportnich otv distance of transport ho 4x10=400.2mm 4x11=440.2mm 4x12=480.2mm 1.5 0.1 20.1 REV 8 1 240.3 A 9A ATION IS CONFIDENTIAL AND PROPRIETARY TO TYCO CORPORATION AND ITS WORLDWIDE SUBSIDIARIES ES (TE). IT MAY NOT BE DISCLOSED TO ANYONE, TE PERSONNEL, WITHOUT ON FROM TE (www.TE.com). Datasheets and product data is subject to the terms of the disclaimer and all chapters ofB the `Definitions' section, available at http://relays.te.com/definitions Datasheets, product data, 1.5 `Definitions' sec0.1 tion,120.15 application notes and all specifications are subject to change. 1.2+0 0 5 TOLERANC OTHERWISE DIMENSIONS: - S 4:1 9 LOC max 2.20.2 P2L3 SCALE 4 12 Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Petr Hofm NAME 1 9 09-2012, Rev. 0912 12 www.te.com (c) 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. company 0.1 0.01 0.001 0.0001 Tape and reel for SMT SHEET 2 12 APVD - APVD SURFACE TEXTURE 5 CHK max B - ZC DWN 6 90.2 HEAT TREAT DWN TOLERANCES UNLESS OTHERWISE SPECIFIED: mm TE Connectivity C23303-A079-C120 4: Zdenek Cu 3 7 4.50.2 1.90.2 (3.6) NEW - - 1 15.40.2 4 REV OF Petr NAME SCALE - APVD SURFACE TEXTURE 30.03.2012 B 26.3.2012 DRAWING NO B-B - APVD 0.1 0.01 0.001 0.0001 PLC PLC PLC PLC PLC 1.5 0.1 max. 3 A - ANGLES 160.15 LOC 3306-7 (3/11) MATERIAL -9 PS conductivity 10 S/m 0 1 2 3 4 DIMENSIONS: - 26.3.2012 3 15.5 15.5 15.5 PH 1.2+0.2 0 1 1 8 P2L2/P2L3/FU2 - Blister tape short terminals SCALE ZC DATE 6 80.2 TE Connectivity NAME APVD SURFACE TEXTURE 5 TOLERANCES UNLESS DIMENSIONS: 4:1 ANGLES Zdenek Curda CHK 0.6 x. R 0.3 - 7 B HEAT TREAT DWN 26.3.2012 APVD SCALE 9193 9121 4 MATERIAL -9 PS conductivity 10 S/m - CHK 1.30.2 1.90.2 1.90.2 ma P 11.50.1 8 8 1.2+0.2 0 1.5 0.1 120.15 B 8 8 1.90.2 R0.3 1.5 0.1 DIMENSIONS: LOC DWG NO 2.20.2 15.40.2 max. THIS DRAWING IS A CONTROLLED DOCUMENT A C23303-A079-C120 max . 1.30.2 15.40.2 A (3.6) B-B 2.20.2 11.50.1 240.3 11.50.1 240.3 A B - C . 3 20.1 1.5 1.5 max 20.1 4.50.2 16 1.5 0.1 16 2:1 1.90.2 16 9.10.2 1.5 0.1 2:1 9.10.2 (3.6) 40.1 B 40.1 3 mm 2:1 1.90.2 90.2 3 2:1 1.30.2 1.750.1 1.750.1 B - - REV 1 USED ON - 3 Zde CHK TOLERANCES UNLESS OTHERWISE SPECIFIED: DIMENSIONS: D (3.6) max. 80.2 - OF D max. 80.2 DIST - 3306-7 (3/11) 3 40.2 160.15 3 DIST 1 x. R0 .3 40.2 1 4x10=400.2mm 4x11=440.2mm 4x12=480.2mmDWN ( 1.5) 1.5 0.1 1.5 0.1 B ma roztec +0.2 transportnich 1.2 0 distance of transport (48) 20.1 40.1 . 3 ma (8) A 3 REV LOC SHEET R0 .3 max. 3 B max x. 3 ma 10.9+0.3 0 max. 3 1 ma x. R0 .3 4.50.2 1.90.2 C23303-A079-C119 THIS DRAWING IS A CONTROLLED DOCUMENT 1.90.2 1.90.2 240.3 SIZE 4:1 4 A - A 12.20.2 120.2 TE Connectivity 1 OF x. 10.9+0.3 0 A-A 1 3 - Blister tape long2terminals P2L3 - APVD SURFACE TEXTURE 5 SHEET A3 NAME (3.6) (3.6) P2L3 - Blister30.3.2012 tape long terminals SCALE SIZE DRAWING NO Petr4:1 Hofman C23303-A079-C121 APVD 0.1 0.01 0.001 0.0001 0 PLC 0.6 6 mm 1 PLC APVD SURFACE TEXTURE HEAT TREAT TE Connectivity max. 3 1.30.2 LTR 6 DWN MATERIAL -9 PS conductivity 10 S/m - NAME x. A R0 .3 7 PH 9122 - ma 100.2 A B-B 15.40.2 PH 9122 DATE 17.06.2011 30.3.2012 Petr Hofman CHK - max. 3 1. 1. 15.40.2 ZC PH 25.05.1998 30.03.2012 REVISION RECORD 0.001 0.0001 1 10.4 0.4 - 0.1 3 PLC 4 PLC HEAT TREAT 8 10.4 0.4 - 1 LTR - - Zdenek Curda APVD 0 PLC 1 PLC TOLERANCES UNLESS 0.01 2 PLC SPECIFIED: OTHERWISE DIMENSIONS: MATERIAL -9 PS conductivity 10 S/m 30.3.2012 TOLERANCES UNLESS DWN OTHERWISE SPECIFIED: mm PH 30.3.2012 USED ON 3306-7 (3/11) (3.6) 0.3 max. R A-A REV 1 B 40.2 THIS INFORMATION IS CONFIDENTIAL AND PROPRIETARY TO TYCO ELECTRONICS CORPORATION AND ITS WORLDWIDE SUBSIDIARIES AND AFFILIATES (TE). IT MAY NOT BE DISCLOSED TO ANYONE, OTHER THAN TE PERSONNEL, WITHOUT AUTHORIZATION FROM TE (www.TE.com). 1 P PH 9122 1.2+0.2 0 THIS INFORMATION IS CONFIDENTIAL AND PROPRIETARY TO TYCO ELECTRONICS CORPORATION AND ITS WORLDWIDE SUBSIDIARIES AND AFFILIATES (TE). IT MAY NOT BE DISCLOSED TO ANYONE, OTHER THAN TE PERSONNEL, WITHOUT AUTHORIZATION FROM TE (www.TE.com). .3 max. R0 THIS INFORMATION IS CONFIDENTIAL AND PROPRIETARY TO TYCO ELECTRONICS CORPORATION AND ITS WORLDWIDE SUBSIDIARIES AND AFFILIATES (TE). IT MAY NOT BE DISCLOSED TO ANYONE, OTHER THAN TE PERSONNEL, WITHOUT AUTHORIZATION FROM TE (www.TE.com). - ZC 17.06.2011 A-A THIS DRAWING IS A CONTROLLED DOCUMENT DWG NO C23303-A079-C120 THIS DRAWING IS A CONTROLLED DOCUMENT DWG NO - 2 30.03.2012 - 8 NEW OF THIS DRAWING IS A CONTROLLED DOCUMENT 1.30.2 8 3 A 8 C23303-A079-C119 2 REV 1 1 1 SHEET B DWN B-B - OF 15.40.2 - - 2 7 3306-7 (3/11) A3 2 DRAWING NO 3 CHK DIMENSIONS: 3 90.2 - SIZE ma THIS INFORMATION IS CONFIDENTIAL AND PROPRIETARY TO TYCO ELECTRONICS CORPORATION AND ITS WORLDWIDE SUBSIDIARIES AND AFFILIATES (TE). IT MAY NOT BE DISCLOSED TO ANYONE, OTHER THAN TE PERSONNEL, WITHOUT AUTHORIZATION FROM TE (www.TE.com). DIST 8 LOC SHEET 1 C23303-A079-C119 P2L2/FU2 - Blister tape long terminals 4:1 Zdenek Curda 1.5 0.1 160.15 - P AND AFFILIATES (TE). IT MAY NOT BE DISCLOSED TO ANYONE, OTHER THAN TE PERSONNEL, WITHOUT AUTHORIZATION FROM TE (www.TE.com). 1.5 0.1 160.15 LOC IST DIST 2:1 A3 1.2+0.2 0 B 3306-7 (3/11) 6-7 (3/11) (3.6) DWG NO 4 15.40.2 240.3 1.30.2 1.750.1 5 NAME 3SCALE 1.2+0.2 0 B OC (3.6) 1.90.2 2.20.2 15.40.2 0.6 - APVD SURFACE TEXTURE SIZE DRAWING NO Petr Hofman 4:1 B-B 0.6 6 0.0001 B-B 10.4 0.4 DWN SCALE 0.001 3 PLC 4 PLC 4 10.4 0.4 DATE 4x11=440.2mm 0.1 1 PLC 0.01 2 PLC 4x12=480.2mm - - ANGLES roztec transportnich otvoru distance of transport holes 4x10=400.2mm 4x11=440.2mm 4x12=480.2mm 1.5 0.1 20.1 x. REVISION RECORD 9188 9151 B A ma 25.05.1998 5 PH ANGLES APVD SURFACE TEXTURE ZC 9122 12.10.2 10.4 0.4 6 7 ZC 9151 1.5) 1.750.1 ( 17.06.2011DWN A 11.50.1 LTR DATE - 1.750.1 - PH 26.3.2012 25.05.1998 9188 1.5 0.1 REVISION RECORD HEAT TREAT -9 PS conductivity 10 S/m - C23303-A079-C121 1.5) MATERIAL max. 3 9.90.2 11.90.2 11.50.1 ZC 9122 2.20.2 0.6 ZC 240.3 8 11.50.1 3306-7 (3/11) ( 1.5 0.1 (48) 26.3.2012 17.06.2011 26.3.2012 D A 10.4+0.3 0 P Zdenek Curda CHK TOLERANCES UNLESS max. 3 B 40.2 240.3 - 11.50.1 1 7 DWN max B D A 4.40.2 8 DIST (48) 7 (8) 1 820.1 LTR 7 - 2:1 . 3 DWG NO P 160.15 .3 . R02:1 max A-A DWN MATERIAL HEAT TREAT SPECIFIED: 26.3.2012 roztecOTHERWISE transportnich otvoru 1.5 -9 PS conductivity 10 S/m mm Zdenek C APVD TE Connectivity distance of transport holes 1.5 Curda 26.3.2012 0 PLC CHK 0.1 Petr Hofman 1 roztec PLC transportnich otvoru 1.5 4x10=400.2mm TOLERANCES UNLESS DIMENSIONS: 0.01 2 PLC OTHERWISE SPECIFIED: C NAME distance of0.001 transport holes 1.5 3 PLC 4x11=440.2mm 40.1 mm 2:1 0.0001 APVD 4 4x10=400.2mm PLC TE Connectivity 26.3.2012 P2L2/FU2 - Blister tape long terminals 0 PLC 4x12=480.2mm - DIMENSIONS: B- . R0.3 max 1.2+0.2 0 12.20.2 1.5 0.1 - 1.90.2 40.1 A 1.2+0.2 0 1.30.2 -- 160.15 USED ON - 1.90.2 1.750.1 20.1B 12.20.2 1.5 m0.1 ax. 3 B 8 .3 3 NEW USED ON 4.40.2 100.2 A x ma R0 .3 max. (8) DIST LOC R0 .3 ma x. A 40.2 120.2 3306-7 (3/11) x.A 3 max. 3 B-B 2.20.2 2.20.2 A 120.2 - 40.1 ma ma x. A-A 1.30.2 15.40.2 11.50.1 11.50.1 240.3 240.3 C23303-A079-C121 A max. 3 B LOC A-A 100.2 THIS DRAWING IS A CONTROLLED DOCUMENT 1.750.1 THIS INFORMATION CONFIDENTIAL AND PROPRIETARY TO TYCO THISISINFORMATION IS CONFIDENTIAL AND PROPRIETARY TO TYCO ELECTRONICS CORPORATION AND ITS WORLDWIDE ELECTRONICS CORPORATION AND ITSSUBSIDIARIES WORLDWIDE SUBSIDIARIES AND AFFILIATESAND (TE).AFFILIATES IT MAY NOT BE IT DISCLOSED TODISCLOSED ANYONE, TO ANYONE, (TE). MAY NOT BE THAN TEWITHOUT PERSONNEL, WITHOUT OTHER THAN TEOTHER PERSONNEL, FROM TE (www.TE.com). AUTHORIZATIONAUTHORIZATION FROM TE (www.TE.com). DWG NO 40.2 10.4+0.3 0 10.4+0.3 0 B-B C (3.6) 20.1 C (3.6) 40.1 2:1 1.5 1.5 (3.6) 20.1 . 3 1.5 0.1 2:1 2:1 10.4 0.4 roztec transportnich otvoru 1.5 distance of transport holesotvoru 1.5 roztec transportnich 4x10=400.2mm distance of transport holes 4x11=440.2mm 4x10=400.2mm 4x12=480.2mm 4x11=440.2mm 4x12=480.2mm 1.5 0.1 max . 3 40.1 D P2 Relay V23079 (Continued) max 1.750.1 1.750.1 B B AXICOM max. 3 max. 3 12.10.2 12.10.2 9.90.2 9.90.2 11.90.2 11.90.2 - D mam x.a3x. 3 40.2 40.2 0.6 0.6 max. 3 max. 3 - USED ON Signal Relays . 3 max x. 3 ma ma x. R0 ma .3 x. R0 .3 +0.3 +0.30 10.9 10.9 0 C23303-A079-C119 C23303-A079-C119 THIS DRAWING IS A CONTROLLED DOCUMENT THIS DRAWING IS A CONTROLLED DOCUMENT DWG DWG NO NO USED ON A-A A-A 8 - 26.3.2012 7 - 13.12.2005 ZC PH 9193 9121 mm 0 1 2 3 PLC PLC PLC PLC Signal Relays AXICOM P2 Relay V23079 (Continued) Product code structure Typical product code V23079 A 1 001 B 301 Type V23079 Signal Relay P2 Series Version A THT, monostable D SMT, monostable, long term. B THT, latching, 2 coils E SMT, latching, 2 coils long term. C THT, latching, 1 coil F SMT, latching, 1 coil long term. Coil design 1 Standard coil (not for high dielectric version) 2 Overmolded coil Coil Coil code: please refer to coil versions table Version B Standard version X High dielectric version Contacts for standard versions 301 2 form C contacts (2 CO), AgNi +Au 201 2 form C contacts (2 CO), AgPd +Au; on request only Product code V23079-A1006-B301 V23079-A1005-B301 V23079-A2008-B301 V23079-A2011-B301 V23079-A2001-B301 V23079-A2002-B301 V23079-A2006-B301 V23079-A2003-B301 V23079-B1218-B301 V23079-B1208-B301 V23079-B1211-B301 V23079-B1201-B301 V23079-B1202-B301 V23079-B1206-B301 V23079-B1203-B301 V23079-B1205-B301 V23079-B2219-B301 V23079-B2218-B301 V23079-B2208-B301 V23079-B2201-B301 V23079-C1108-B301 V23079-C1111-B301 V23079-C1101-B301 V23079-C1102-B301 V23079-C1106-B301 V23079-C1103-B301 V23079-C1105-B301 6 Version Coil design G H J SMT, monostable, short term. SMT, latching, 2 coils short term. SMT, latching, 1 coil short term. Coil type Overmolded Standard Bistable, 2 coils Overmolded Standard Bistable, 1 coils Coil voltage 9VDC 24VDC 3VDC 4.5VDC 5VDC 6VDC 9VDC 12VDC 2.4VDC 3VDC 4.5VDC 5VDC 6VDC 9VDC 12VDC 24VDC 2VDC 2.4VDC 3VDC 5VDC 3VDC 4.5VDC 5VDC 6VDC 9VDC 12VDC 24VDC Part number 2-1393788-0 1-1393788-6 6-1419120-6 3-1393789-9 3-1393789-5 3-1393789-6 3-1393789-8 3-1393789-7 1422002-8 4-1393788-1 4-1393788-2 3-1393788-3 3-1393788-5 3-1393788-9 3-1393788-6 3-1393788-7 1-1422002-2 1-1422002-1 1-1422002-0 1422002-9 5-1393788-3 5-1393788-4 4-1393788-5 4-1393788-7 5-1393788-1 4-1393788-8 5-1393788-0 09-2012, Rev. 0912 www.te.com (c) 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change. Signal Relays AXICOM P2 Relay V23079 (Continued) Product code V23079-D1006-B301 V23079-D1005-B301 V23079-D2008-B301 V23079-D2011-B301 V23079-D2001-B301 V23079-D2002-B301 V23079-D2006-B301 V23079-D2003-B301 V23079-E1219-B301 V23079-E1218-B301 V23079-E1208-B301 V23079-E1211-B301 V23079-E1201-B301 V23079-E1202-B301 V23079-E1206-B301 V23079-E1203-B301 V23079-E1205-B301 V23079-E2219-B301 V23079-E2201-B301 V23079-E2208-B301 V23079-E2218-B301 V23079-F1108-B301 V23079-F1111-B301 V23079-F1101-B301 V23079-F1102-B301 V23079-F1106-B301 V23079-F1103-B301 V23079-F1105-B301 V23079-G1005-B301 V23079-G2008-B301 V23079-G2016-B301 V23079-G2011-B301 V23079-G2001-B301 V23079-G2002-B301 V23079-G2006-B301 V23079-G2003-B301 V23079-H1208-B301 V23079-H1211-B301 V23079-H1201-B301 V23079-H1202-B301 V23079-H1206-B301 V23079-H1203-B301 V23079-H1205-B301 V23079-J1108-B301 V23079-J1111-B301 V23079-J1101-B301 V23079-J1102-B301 V23079-J1103-B301 V23079-J1105-B301 V23079-G2008-X079 V23079-G2001-X071 V23079-G2002-X072 V23079-G2006-X073 V23079-G2003-X074 V23079-A2003-X074 V23079-A2008-X079 Version Coil design Coil type Overmolded Standard Bistable, 2 coils Overmolded Standard SMT, short pins Overmolded Standard Bistable, 1 coil Monostable Bistable, 2 coils Bistable, 1 coil High dielectric Overmolded Monostable Coil voltage 9VDC 24VDC 3VDC 4.5VDC 5VDC 6VDC 9VDC 12VDC 2VDC 2.4VDC 3VDC 4.5VDC 5VDC 6VDC 9VDC 12VDC 24VDC 2VDC 5VDC 3VDC 2.4VDC 3VDC 4.5VDC 5VDC 6VDC 9VDC 12VDC 24VDC 24VDC 3VDC 4VDC 4.5VDC 5VDC 6VDC 9VDC 12VDC 3VDC 4.5VDC 5VDC 6VDC 9VDC 12VDC 24VDC 3VDC 4.5VDC 5VDC 6VDC 12VDC 24VDC 3VDC 5VDC 6VDC 9VDC 12VDC 12VDC 3VDC Part number 5-1393788-9 5-1393788-8 4-1393789-7 4-1393789-8 4-1393789-3 4-1393789-4 4-1393789-6 4-1393789-5 1-1422007-0 1422007-5 7-1393788-1 7-1393788-2 6-1393788-8 1393789-5 1393789-9 6-1393788-9 7-1393788-0 1422007-6 1422007-7 1422007-8 1422007-9 7-1393788-5 1-1393789-4 7-1393788-3 1-1393789-0 1-1393789-2 7-1393788-4 1-1393789-1 7-1393788-8 5-1393789-4 1393790-5 5-1393789-5 4-1393789-9 5-1393789-0 5-1393789-3 5-1393789-1 2-1393789-4 8-1393788-4 2-1393789-0 2-1393789-1 2-1393789-3 8-1393788-3 2-1393789-2 2-1393789-9 3-1393789-0 2-1393789-5 2-1393789-6 2-1393789-7 2-1393789-8 1422006-5 1422006-1 1422006-2 1422006-3 1422006-4 1422025-7 1-1422025-1 09-2012, Rev. 0912 www.te.com (c) 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. company Datasheets and product specification according to IEC 61810-1 and to be used only together with the `Definitions' section. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the `Definitions' section, available at http://relays.te.com/definitions Datasheets, product data, `Definitions' section, application notes and all specifications are subject to change. 7