Web page Tools & software Sample & buy Support & FAQ Document 1102-1 SMT Common Mode Chokes - SBU9 * * * * Low profile, surface mount design Ideal for switching power supplies Eliminates most line conducted common mode noise. Provides significant attenuation of common mode noise across a broad range of frequencies. Core material Ferrite Terminations RoHS compliant tin-silver over copper. Weight 2.4 - 2.7 g Ambient temperature -40C to +125C Storage temperature Component: -40C to +125C. Tape and reel packaging: -40C to +80C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 350/13 reel; Plastic tape: 32 mm wide, 0.5 mm thick, 20 mm pocket spacing, 8.5 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. Part number1 Common mode peak impedance (kOhms) SBU9-103R25L_ SBU9-2820R5L_ SBU9-1320R7L_ SBU9-6011R0L_ 94.40 26.31 12.68 6.66 @ 230 kHz @ 570 kHz @ 900 kHz @ 1300 kHz Inductance2 min (mH) Irms3 (A) DCR max4 (Ohms) Isolation5 (Vrms) 10 2.8 1.3 0.6 0.25 0.50 0.70 1.00 2.5 0.70 0.38 0.20 1500 1500 1500 1500 1. When ordering, please specify packaging code: SBU9-6011R0LD Packaging: D = 13 machine-ready reel. EIA-481 embossed plastic tape 350 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. 2. Inductance tested at 1 kHz, 1 Vrms, 0 Adc on an Agilent/HP 4284A LCR-meter or equivalent. 3. Current per winding that causes a 40C rise from 25C ambient. This information is for reference only and does not represent absolute maximum ratings. 4. DCR is specified per winding. 5. Isolation (hipot) measured with 3 mA applied for two seconds. 6. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. 1 2 6 XXXXRXL XXXXY 5 3 0.492 max 12,5 1 2 6 5 4 0.362 max 9,2 0.717max 18,2 0.024 0,6 0.051 1,3 0.083 2,1 1 0.197 5,0 Dimensions are in 0.197 5,0 Recommended Land Pattern 0.650 16,5 inches mm US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 1102-1 Revised 02/05/15 (c) Coilcraft Inc. 2017 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 1102-2 Common Mode Chokes - SBU9 Series Typical Attenuation (Ref 50 Ohms) 0 10 Attenuation (dB) 20 30 -6011 40 -6011 -103 -2820 -1320 50 -1320 -2820 60 Common mode Differential mode -103 70 0.1 1 10 100 10 100 Frequency (MHz) Typical Impedance 100 -103 Impedance (kOhm) -2820 -1320 10 -6011 1 0.1 0.1 1 Frequency (MHz) US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 1102-2 Revised 02/05/16 (c) Coilcraft Inc. 2017 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Coilcraft: SBU9-103R25LD SBU9-6011R0LB SBU9-6011R0LD SBU9-103R25LB SBU9-2820R5LB SBU9-1320R7LB SBU91320R7LD SBU9-2820R5LD