GF80251B2-000U-SE9 - Sunon Fans

建準電機

SUNONWEALTH

Page 1 of 16

SUNON

CUSTOMER :

DESCRIPTION : DC BRUSHLESS FAN

DIMENSIONS : 80X80X25 mm

M O D E L : GF80251B2-000U-SE9

SUNON SPEC. NO. : D08055540G-00

CUSTOMER

APPROVAL NO. :

APPROVED BY

CUSTOMER :

(AUTHORIZED)

SPEC.NO D08055540G-00

ISSUE DATE 05.21.2014

EDITION 0

REVISION DATE

DRAWN Yinina

05/21 CHECKED Kiddy

Cindy APPROVED Kelly

E.SPEC E11400066

建準電機工業股份有限公司

SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD.

NO. 30, LN. 296, XINYA RD., QIANZHEN DIST., TEL:886-7-8135888

KAOHSIUNG CITY 80673, TAIWAN (R.O.C) FAX:886-7-8230505/8230606/8231010

URL:http://www.sunon.com E-mail: sunon@email.sunon.com.tw

SPECIFICATION FOR APPROVAL

2014.06.13

D.C.C.

建準電機

SUNONWEALTH

Page 2 of 16

I. MODEL NUMBERING SYSTEM

編碼尺寸(mm) 編碼尺寸(mm) 編碼尺寸(mm) 編碼尺寸(mm)

01~09 01~09 A0~A9 100~109 K0~K9 200~209 V0~V9 300~309

10~19 10~19 B0~B9 110~119 L0~L9 210~219 W0~W9 310~319

20~29 20~29 C0~C9 120~129 M0~M9 220~229 X0~X9 320~329

30~39 30~39 D0~D9 130~139 N0~N9 230~239 Y0~Y9 330~339

40~49 40~49 E0~E9 140~149 P0~P9 240~249 Z0~Z9 340~349

50~59 50~59 F0~F9 150~159 Q0~Q9 250~259

60~69 60~69 G0~G9 160~169 R0~R9 260~269

70~79 70~79 H0~H9 170~179 S0~S9 270~279

80~89 80~89 I0~I9 180~189 T0~T9 280~289

90~99 90~99 J0~J9 190~199 U0~U9 290~299

Voltage

0: 5VDC

1: 12VDC

2: 24VDC

3: 36VDC

4: 48VDC

Function Code

SE9

Customer Code

Thickness Size

Series Code

Bearing

V: Vapo

B: 2 Ball

O: 1Ball

S: Sleeve

Speed

X:Super High

1: High

2: Medium

3: Low

4: Extra Low

000U80 25 -

2014.06.13

D.C.C.

建準電機

SUNONWEALTH

Page 3 of 16

II. SPECIFICATION

1. MECHANICAL CHARACTERISTIC

MOTOR DESIGN Single phase, 4-poles Brushless DC motor

BEARING SYSTEM Precision ball bearing system

DIMENSIONS See Page 6

MATERIALS OF FRAME Thermoplastic PBT of UL 94V-0

MATERIALS OF FAN BLADE Thermoplastic PBT of UL 94V-0

DIRECTION OF ROTATION Counter-clockwise viewed from front of fan blade

MOUNTING HOLES Diameter 4.3 mm in 8 holes

WEIGHT 105 g

2. ELECTRIC CHARACTERISTIC

RATED VOLTAGE 12 VDC

RATED CURRENT 255 mA / MAX. 294 mA

RATED POWER CONSUMPTION 3.06 WATTS / MAX. 3.53 WATTS

OPERATING VOLTAGE RANGE 10.2~13.8 VDC

STARTING VOLTAGE 10.2 VDC (25 deg. C POWER ON/OFF)

OPERATING TEMPERATURE RANGE -10 to + 70 deg. C

STORAGE TEMPERATURE RANGE -40 to + 80 deg. C

2014.06.13

D.C.C.

建準電機

SUNONWEALTH

Page 4 of 16

3. PERFORMANCE CHARACTERISTIC

RATED SPEED 4500 RPM ± 10% at rated voltage

AIR FLOW 57 CFM

STATIC PRESSURE 0.35 Inch-H2O

ACOUSTIC NOISE 46 dB(A)

AIR FLOW V.S. PRESSURE See Page 5

INSULATION CLASS UL Class A

INSULATION RESISTANCE

PLASTIC HOUSING

10M ohm at 500 VDC between internal stator and

lead wire (+)

DIELECTRIC STRENGTH Applied AC 500 V for one minute or AC 600 V for 2

Seconds between housing and lead wire (+)

LIFE EXPECTANCY 70,000 Hours at 40 deg. C, 65% humidity, 90% CL.

Automatic Restart

Note: In a situation where the fan is locked by an external force

while the electricity is on, an in crease in coil temperature will be

prevented by temporarily turning off the electrical power to the

motor. The fan will automatically restart when the locked rotor

condition is released.

PROTECTION

Polarity Protection

IP Class : IP68 According to IEC 529 (or IEC 34-5) IP standard, the average

temperature is 23~24°C and humidity is 67% RH for Dust Water Test.

The fan needs to be test and Spray Put in dust box for 8 hours for Dust

Test and be put in long period immersion of water for Spray Water

Test. After these 2 tests, which executing by regular standard, the fan

will be measured the performance is normal or not.

PS. There are different applicative environments and systems by

different customers, so please put the product in the most suitable

environment to measure the performances.

4. SAFETY

SAFETY UL CUR TUV CE

NO. E77551 E77551  

2014.06.13

D.C.C.

建準電機

SUNONWEALTH

Page 5 of 16

MODEL : GF80251B2-000U-SE9

PERFORMANCE CURVES

0.05

0.1

0.15

0.2

0.25

0.3

0.35

0.4

0 102030405060

Air Flow-CFM

Static Pressure (Inch-H2O)

0 0.34 0.68 1.02 1.36 1.7

/min

mm-H

2014.06.13

D.C.C.

建準電機

SUNONWEALTH

Page 6 of 16

DIMENSIONS

Screw Spec Screw Type

(Pan head) Torque Size Standard

Machine screw 3～4 Kgf-cm M4.0 JIS B1111-1974

Self-tapping screw 5～6 Kgf-cm ∮5.0 JIS B1122 Type 2

Note: SUNON recommends the screw and torque as above. Please contact SUNON, if any

new requirement is requested.

UNIT：mm

2014.06.13

D.C.C.

建準電機

SUNONWEALTH

Page 7 of 16

LABEL

2014.06.13

D.C.C.

建準電機

SUNONWEALTH

Page 8 of 16

 F Type (Frequency Generator)

min. typ. max.

-- -- 13.8

-- -- 5

0--0.5

-- V+ --

-- 10 --Ratio(=t1/t2)

FG Output (VL) Voltage

FG Output (VH) Voltage

FG Supply Voltag e(V+) Voltage

FG Output Current (If) mA

*R a ≧ V+ / If (max)

★Electrical Characteristics ：( at Ta = 25℃，Vcc =12V)

Parameter Ratings Unit

FG O utp u t

Voltage

T1 T2 T3 T4

T = 1 Rotation

T= T1+T2+T3+T4=1 Rotatio n

T= 60

rpm

Vcc V+

F A N (+)

(-)

FG Output

USER SYSTEM

FAN

Operation

Current

FG O utput

Voltage

OFF RUN LOCKED

t1t2

FAN 3rd WIRE SIGNAL

2014.06.13

D.C.C.

建準電機

SUNONWEALTH

Page 9 of 16

Unit

★PWM INPUT WAVEFORM

1. P er iod :

2. Du ty Cycle（D.C.） :

3. PW M Duty Cycle VS Speed (at Ta = 25℃,Vcc =12VDC, fpwm=25 KHz)

PW M Duty Cycle (%) FAN Speed（ R.P.M.）

100 4500±10％

50 2400±250

★ E lec tric al Char ac teristics at Ta = 25℃；Vcc=12V

Parameter Min Typical Max

f pwm 22K 25K 28 K

VH2.3 5.5 —

VL0—0.8

Isource — 0.8 —

D.C. 0 — 100

* The speed is default to be m axim um if PWM input pin is unc onnec ted.

. t2(sec) t1

TfPWM



t1 t2

. 100(%)

100

t2t1t1 



10K

15K

Ground

Isource

PWM Input

Vcc = rated volt. FanSystem

PWM INPUT SIGNAL

2014.06.13

D.C.C.

建準電機

SUNONWEALTH

Page 10 of 16

III. OTHER SPECIFIED TESTING

The following is a general description of certain tests that are performed on

representative SUNON fans. Nothing in this document is intended to suggest that

these tests are performed on every model of SUNON fan. Moreover, the descriptions

that follow each test are meant only to provide a general explanation of each test. If

you would like a more detailed explanation as to any test identified in this Section,

SUNON can provide such an explanation upon request.

1. DROP PROOF TEST

Fans are packaged in a standard size shipping box and are dropped to the ground from

certain heights and angles depending on the weight of the particular box.

2. HUMIDITY PROOF TEST

The fan is operated for 96 continuous hours in an environment with humidity of 90%

to 95% RH at 60°C  2°C.

3. VIBRATION PROOF TEST

Vibration with an amplitude 2mm and a frequency of 5-55-5hz is applied in all 3

directions (X,Y,Z), in cycles of 1 hour each, for a total vibration time of 3hours.

4. THERMAL CYCLING TEST

The fan is operated in a testing chamber for 50 cycles. In each cycle, the temperature is

gradually increased from -10°C to 70°C for 90 minutes, and subsequently operated at

70°C for 120 minutes. The temperature is then gradually decreased from 70°C to

-10°C for 90 minutes, and subsequently operated at -10°C for 120 minutes.

5. SHOCK PROOF TEST

100G of force is applied in the 3 directions (X,Y, and Z) for 2 milliseconds each.

6. LIFE EXPECTANCY

The “Life Expectancy” of SUNON fans is determined in SUNON’s reliability test

laboratory by using temperature chambers. The “Life Expectancy” of this fan has not

been evaluated for use in combination with any end application. Therefore, the Life

Expectancy Test Reports (L10 and MTTF Report) that relate to this fan are only for

reference.

2014.06.13

D.C.C.

建準電機

SUNONWEALTH

Page 11 of 16

IV. CHARACTERISTIC DEFINITION

The following is a general description of certain tests that are performed on

representative SUNON fans in order to determine the specifications of the fan.

Nothing in this document is intended to suggest that these tests are performed on

every model of SUNON fan. Moreover, the descriptions that follow each test are

meant only to provide a general explanation of each test. If you would like a more

detailed explanation as to any test identified in this Section, SUNON can provide

such an explanation upon request.

1. ACOUSTICAL NOISE

Measured in a semi-anechoic chamber with background noise level below 15dB(A).

1 METER FROM MICROPHONE TO FAN INTAKE

The fan is running in free air under shaft horizontal condition with the microphone at

distance of one meter from the fan intake.

2. INPUT POWER

Measured after continuous 10 minute operation at rated voltage in clean air

( STATIC PRESSURE=0), and at ambient temperature of 25 degrees C under shaft

horizontal condition.

3. RATED CURRENT

Measured after continuous 10 minute operation at rated voltage in clean air

( STATIC PRESSURE=0), and at ambient temperature of 25 degrees C under shaft

horizontal condition.

2014.06.13

D.C.C.

建準電機

SUNONWEALTH

Page 12 of 16

4. RATED SPEED

Measured after continuous 10 minute operation at rated voltage in clean air

( STATIC PRESSURE=0), and at ambient temperature of 25 degrees C under shaft

horizontal condition.

5. STARTING VOLTAGE

Measured the voltage which enables to start the fan in the clean air (static pressure = 0 )

by switching on at the voltage under shaft horizontal condition. It is not at continuously

increasing voltage adjustment.

6. LOCKED ROTOR CURRENT

Measured immediately after the fan blade is locked.

7. AIR FLOW AND STATIC PRESSURE

The performance specification of air flow and static pressure shown in this specification

for approval is measured using the exhaust method. A double chamber is used in

accordance with AMCA 210 standard or DIN 24163 specification . The values are

recorded when the fan speed has stabilized at rated voltage.

8. INSULATION RESISTANCE

1. PLASTIC HOUSING:

(1) Measured between internal stator and lead wire(+).

(2) Measured between housing and lead wire(+).

2. ALUMINIUM HOUSING:

Measured between internal stator and lead wire(+).

9. DIELECTRIC STRENGTH

Measure between housing and lead wire(+).

2014.06.13

D.C.C.

建準電機

SUNONWEALTH

Page 13 of 16

V. NOTE

Ⅰ.SAFETY

1. DO NOT use or operate this fan in excess of the limitations set forth in this

specification. SUNON is not responsible for the non-performance of this fan

and/or any damages resulting from its use, if it is not used or operated in

accordance with the specifications.

2. SUNON recommends adding a protection circuit to the product or application in

which this fan is installed, such as a thermo-fuse, or current-fuse or

thermo-protector. The failure to use such a device may result in smoke, fire,

electric shock by insulation degradation in cases of motor lead short circuit,

overload, or over voltage, and/or other failure.

3. SUNON recommends installing a protection device to the product or application

in which this fan is installed if there is a possibility of reverse-connection

between VDC (+) and GND (-). The failure to install such a device may result in

smoke, fire, and/or destruction, although these conditions may not manifest

immediately.

4. This fan must be installed and used in compliance with all applicable safety

standards and regulations.

5. Use proper care when handling and/or installing this fan. Improper handling or

installation of this fan may cause damage that could result in unsafe conditions.

6. Use proper care during installation and/or wiring. Failure to use proper care may

cause damage to certain components of the fan including, but not limited to, the

coil and lead wires, which could result in smoke and/or fire.

7. DO NOT use power or ground PWM to control the fan speed. If the fan speed

needs to be adjusted, please contact SUNON to customize the product design for

your application.

8. For critical or extreme environments, including non stop operation, please contact

SUNON and we will gladly provide assistance with your product selection to

ensure an appropriate cooling product for your application.

2014.06.13

D.C.C.

建準電機

SUNONWEALTH

Page 14 of 16

II. SPECIFICATION MODIFICATION

1. SUNON offers engineering assistance on fan installation and cooling system design.

2. All changes, modifications and/or revisions to the specifications, if any, are

incorporated in the attached specifications.

3. No changes, modifications and/or revisions to these specifications are effective

absent agreement, by both SUNON and the customer, in writing.

4. This fan will be shipped in accordance with the attached specification unless

SUNON and the customer have agreed otherwise, in writing, as specified in

Paragraph 3, above.

III. OTHER

1. When building your device, please examine thoroughly any variation of EMC,

temperature rise, life data, quality, etc. of this product by shock/drop/vibration

testing, etc. If there are any problems or accidents in connection with this product,

it should be mutually discussed and examined.

2. Use proper care when handling this fan. Components such as fan holders or

bearings may be damaged, if touched with fingers or other objects. Additionally,

static electricity (ESD) may damage the internal circuits of the fan.

3. DO NOT operate this fan in proximity to hazardous materials such as organic

silicon, cyanogens, formalin, phenol, or corrosive gas environments including,

but not limited to, H2S, SO2, NO2, or Cl2.

4. SUNON recommends that you protect this fan from exposure to outside elements

such as dust, condensation, humidity or insects. Exposure of this fan to outside

elements such as dust, condensation, humidity or insects may affect its

performance and may cause safety hazards. SUNON does not warrant against

damage to the product caused by outside elements.

5. This fan must be installed properly and securely. Improper mounting may cause

harsh resonance, vibration, and noise.

2014.06.13

D.C.C.

建準電機

SUNONWEALTH

Page 15 of 16

6. Fan guards may prevent injury during handling or installation of the fan and are

available for sale with this fan.

7. Unless otherwise noted, all testing of this fan is conducted at 25°C ambient

temperature and sixty-five percent (65%) relative humidity.

8. DO NOT store this fan in an environment with high humidity. This fan must be

stored in accordance with the attached specifications regarding storage

temperature. If this fan is stored for more than 6 months, SUNON recommends

functional testing before using.

9. SUNON reserves the right to use components from multiple sources at its

discretion. The use of components from other sources will not affect the

specifications as described herein.

10. The “Life Expectancy” of this fan has not been evaluated for use in combination

with any end application. Therefore, the Life Expectancy Test Reports (L10 and

MTTF Report) that relate to this fan are only for reference.

VI. WARRANTY

This fan is warranted against all defects which are proved to be fault in our

workmanship and material for one year from the date of our delivery. The sole

responsibility under the warranty shall be limited to the repair of the fan or the

replacement thereof, at SUNON’s sole discretion. SUNON will not be responsible

for the failures of its fans due to improper handing, misuse or the failure to follow

specifications or instructions for use. In the event of warranty claim, the customer

shall immediately notify SUNON for verification. SUNON will not be responsible

for any consequential damage to the customer’s equipment as a result of any fans

proven to be defective.

2014.06.13

D.C.C.

建準電機

SUNONWEALTH

Page 16 of 16

Control declaration of environment-related substances/materials

1. In accordance with the Restriction of Hazardous Substances (RoHS) Directive

2011/65/EU, SUNON product have complied with law and discipline not to

employ the forbidden substances, and restrict the allowable concentration of

some limited substances deliberately in our components.

No Substance Criteria

1 CFCs & HCFCs (ozone depleting substances) Forbidden

2 Chlorinated Organic Solvent Forbidden

Plastic (Frame, Impeller, wire harness, etc.) <100ppm

Solder <1000ppm

Steel alloy <3500ppm

Aluminium alloy <4000ppm

3 Lead and its compounds

Copper alloy <4wt%

Solder <20ppm

Parts composed of metals containing zinc

(e.g. brass, zinc for die casting) <100ppm

4 Cadmium and its compounds

Plastic <5ppm

5 PBBs and PBDEs Forbidden

6 PCB and PCT Forbidden

7 CP, Short-chain Chlorinated paraffins C10-13, Cl ≥48 wt% Forbidden

8 Mirex Forbidden

9 PCN Forbidden

10 Hexavalent Chromium compounds <100ppm

11 Mercury and its compounds Forbidden

12 Asbestos Forbidden

13 Organic Tin compounds Forbidden

14 Azo compounds Forbidden

15 TBBP-A in external case plastic parts of products (PCB is exempted) <1000ppm

16 Nickel in external case parts, which are likely to result in prolonged skin exposure <1000ppm

17 Hexabromocyclododecane (HBCDD) <1000ppm

18 Di-butyl Phthalate (DBP) <1000ppm

19 Benzyl butyl Phthalate (BBP) <1000ppm

20 Di-ethylhexyl Phthalate (DEHP) <1000ppm

21 Di-isobutyl Phthalate (DIBP) <1000ppm

Declaration of RoHS

2014.06.13

D.C.C.