- 468 -
1W005GM THRU 1W10GM
Single Phase 1.0 AMP. Glass Passivated Bridge Rectifiers
Voltage Range
50 to 1000 Volts
Current
1.0 Ampere
F
eatures
a UL Recognized File # E-96005
a Glass passivated junction
a Surge overload ratings to 30 amperes
peak
a Ideal for printed circuit board
a Reliable low cost construction technique
results in inexpensive product
a High temperature soldering guaranteed:
260/ 10 seconds / 0.375” ( 9.5mm )
lead length at 5 lbs. ( 2.3 Kg ) tension
M
echanical Data
a Cases: Molded plastic
a Lead: Solder plated
a Polarity: As marked
a
Weight: 1.10 grams
WOB
Dimensions in inches and (millimeters)
M
aximum Ratings and Electrical Characteristics
Rating at 25ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number Symbol
1W
005GM
1W
01GM
1W
02GM
1W
04GM
1W
06GM
1W
08GM
1W
10GM
Unit
s
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
200
400
600
800
1000
V
Maximum RMS Voltage VRMS
35
70
140
280
420
560
700
V
Maximum DC Blocking Voltage VDC 50
100
200
400
600
800
1000
V
aximum Average Forward Rectified Curren
@TA = 50 I(AV) 1.0 A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
Load (JEDEC method ) IFSM
30 A
Maximum Instantaneous Forward Voltage
@ 1.0A VF 1.0 V
Maximum DC Reverse Current @ TA=25
at Rated DC Blocking Voltage @ TA=125 IR 10
500 uA
uA
Typical Thermal Resistance (Note)
RÛJA
RÛJL
36
13 /W
Operating Temperature Range TJ -55 to +150
S torage Temperature Range TSTG -55 to +150
Note: Thermal resistance from Junction to Ambient and from Junction to Lead Mounted on P.C.B.
with 0.47 x 0.47” (12x 12mm) Copper Pads.
REV.1 Oct.-2003
- 469-
RATINGS AND CHARACTERISTIC CURVES (1W005GM THRU 1W10GM)
FIG.1- MAXIMUM NON-REPETITIVE FORWARD SURGE
CURRENT PER BRIDGE ELEMENT
PEAK FORWARD SURGE CURRENT. (A)
12 10 20 10040 60
0
10
40
30
20
50
NUMBER OF CYCLES AT 60Hz
FIG.2- MAXIMUM FORWARD CURRENT DERATING
CURVE
AVERAGE FORWARD CURRENT. (A)
20 40 60 80 100 120 140 160
0
.2
.4
.6
.8
1.0
1.2
1.4
1.6
AMBIENT TEMPERATURE. ( C)
o
FIG.3- TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS PER BRIDGE ELEMENT
INSTANTANEOUS FORWARD CURRENT. (A)
00.2 0.4 0.6 0.8 1.0 1.2 1.4
0.01
0.1
1.0
20
10
FORWARD VOLTAGE. (V)
Tj=25 C
Pulse Width=300 s
1% Duty Cycle
o
FIG.4- TYPICAL REVERSE CHARACTERISTICS
PER BRIDGE ELEMENT
INSTANTANEOUS REVERSE CURRENT.( A)
020 40 60 80 100 120 140
.01
.10
1.0
10
PERCENT OF RATED PEAK REVERSE VOLTAGE. (%)
Tj=100 C
0
Tj=25 C
0