REV. 7/3/03 2 | DATE REV ECN APPD. BY 2/1/06 | AG 7460 WM al I it san o= J, 1 No s #380 [9.65] - 3 525 [13.33] |*.204 [5.18] | __ N z 5 eo aes! | 2 eeee NOTES: t | f | 1- PLUG KIT CONSISTS OF : / PRE-INSERTED PLUG HOUSING | I a 2- MATERIALS : wo i FRONT HOUSING PLASTIC : CLEAR POLYCARBONATE, UL 94VO = 8 CONTACTS : PHOSPHOR BRONZE, SELECTIVE GOLD PLATING 5, S | 232 [5.89] Ee 3 CONTACTS TERMINATE STRANDED & SOLID CONDUCTORS UP + 3 , a. TO .037 [0.94] OUTSIDE DIAMETER OF INSULATION. x }- 534 [13.56] 2 a #128 [3.25] 4 FOR PRODUCT SPECIFICATION SEE PRO26-01. *.240 [3.10] 5 TOLERANCES COMPLY WITH F.C.C. DIMENSION REQUIREMENTS. AA\ TERMINATED PLUG HEIGHT: .237 [6.02] +.005 [0.13] BAG OF 25 | 50 MICRO-INCHES [1.27um] 940-SP-3046R-B25 BULK 50 MICRO-INCHES [1.27um] 940-SP3046R CONTACT PLATING PACKAGE N MATING AREA PART NUMBER THIRD ANGLE PROJECTION @ =} Bel Stewart Connector 11118 Susquehanna Trail South Glen Rock, PA 17327-9199 (717) 235-7512 Fax: (717) 235-7954 http: //www.stewartconnector.com DO NOT SCALE DRAWING DRAWING IS SUBJECT TO * FOUR CONDUCTOR/SIX POSITION LINE CORD MODULE; SHEET NO. 1 OF 1 CONSENT OF BEL STEWART CONNECTOR. THE SUBJECT Ipae-yo; MATTER MAY BE PATENTED OR A PATENT MAY BE PENDING, CHANGE WITHOUT NOTICE RADIAL BACK DIMENSIONS: INCHES [METRIC] THIS DRAWING AND THE SUBJECT MATTER SHOWN THEREON | ORN BY: KR DATE 9 | /06 UNLESS OTHERWISE SPECIFIED ARE CONFIDENTIAL AND THE PROPRIETARY PROPERTY OF TOLERANCES ARE +.005 [0.13] | BEL STEWART CONNECTOR AND SHALL NOT BE REPRODUCED, [APPD BY: DATE 91-06 ANGLES ARE + 1 COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN JM TI CT300087 REV. Ag 1 AutoCAD