038 RSU
www.vishay.com Vishay BCcomponents
Revision: 28-Feb-17 1Document Number: 28309
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Aluminum Electrolytic Capacitors
Radial Standard Ultra Miniature
Fig. 1
FEATURES
• Polarized aluminum electrolytic capacitors,
non-solid electrolyte
• Radial leads, cylindrical aluminum case,
insulated with a blue sleeve
• Pressure relief for caseØ D 6.3 mm
• Charge and discharge proof
• Miniaturized, high CV-product per unit volume
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• General purpose, industrial, automotive, consumer, and
audio-video
• Coupling, decoupling, timing, smoothing, filtering,
buffering in SMPS
• Portable and mobile equipment (small size, low mass)
MARKING
The capacitors are marked (where possible) with the
following information:
• Rated capacitance (in μF)
• Tolerance on rated capacitance, code letter in accordance
with IEC 60062 (M for ± 20 %)
• Rated voltage (in V)
• Date code, in accordance with IEC 60062
• Code indicating factory of origin
• Name of manufacturer
• Negative terminal identification
• Series number (038)
QUICK REFERENCE DATA
DESCRIPTION VALUE
Nominal case sizes (Ø D x L in mm) 5 x 11 to 18 x 40
Rated capacitance range, CR2.2 μF to 22 000 μF
Tolerance on CR ± 20 %
Rated voltage range, UR6.3 V to 100 V
Category temperature range -40 °C to +85 °C
Endurance test at 85 °C:
Case size Ø D 8 mm 2000 h
Case size Ø D 10 mm 3000 h
Useful life at 85 °C:
Case size Ø D 8 mm 2500 h
Case size Ø D 10 mm 3500 h
Useful life at 40 °C, 1.4 x IR applied:
Case size Ø D 8 mm 60 000 h
Case size Ø D 10 mm 90 000 h
Shelf life at 0 V, 85 °C 1000 h
Based on sectional specification IEC 60384-4 / EN130300
Climatic category IEC 60068 40 / 085 / 56
higher
voltage
longer
life
lower
height
lower
leakage
current
152 RMH
148 RUS038 RSU
097 RLP 7
134 RLP 5
013 RLC
038 RSU
www.vishay.com Vishay BCcomponents
Revision: 28-Feb-17 2Document Number: 28309
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Table 1
Note
• Detailed tape dimensions see section “Packaging”.
SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)
CR
(μF)
UR (V)
6.3101625355063100
2.2 5 x 11 5 x 11
3.3 5 x 11 5 x 11
4.7 5 x 11 5 x 11
10 5 x 11 6.3 x 11
22 5 x 11 5 x 11 6.3 x 11
33 5 x 11 6.3 x 11 8 x 11.5
47 5 x 11 6.3 x 11 6.3 x 11 10 x 12
100 5 x 11 5 x 11 6.3 x 11 6.3 x 11 8 x 11.5 10 x 12 10 x 20
220 5 x 11 5 x 11 6.3 x 11 8 x 11.5 8 x 11.5 10 x 12 10 x 16 13 x 25
330 6.3 x 11 6.3 x 11 8 x 11.5 8 x 11.5 10 x 12 10 x 16 10 x 20 13 x 25
470 6.3 x 11 6.3 x 11 8 x 11.5 10 x 12 10 x 16 10 x 20 13 x 20 16 x 25
1000 8 x 11.5 10 x 12 10 x 16 10 x 20 13 x 20 13 x 25 16 x 25 18 x 40
2200 10 x 16 10 x 20 13 x 20 13 x 25 6 x 25 16 x 31 18 x 35
3300 10 x 20 13 x 20 13 x 25 16 x 25 16 x 35 18 x 35
4700 13 x 20 13 x 25 16 x 25 16 x 31 18 x 35
6800 13 x 25 16 x 25 16 x 31 18 x 35
10 000 16 x 25 16 x 35 18 x 35
22 000 18 x 40
DIMENSIONS in millimeters AND AVAILABLE FORMS
Fig. 2 - Form CA Fig. 3 - Form CB:
Cut leads
Fig. 4 - Form TNA, Form TFA:
Taped in box (ammopack), straight leads
Fig. 5 - Form TFA:
Taped in box (ammopack), formed leads
DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES
NOMINAL
CASE SIZE
Ø D x L
CASE
CODE Ø d Ø Dmax. Lmax. FMASS
(g)
PACKAGING QUANTITIES
FORM
CA
FORM
CB
FORM
TFA, TNA
5 x 11 11 0.5 5.5 12.5 2.0 ± 0.5 0.4 5000 2000
6.3 x 11 12 0.5 6.8 12.5 2.5 ± 0.5 0.6 5000 2000
8 x 11.5 13 0.6 8.5 12.5 3.5 ± 0.5 1.1 5000 1000
10 x 12 14 0.6 10.5 13.5 5.0 ± 0.5 1.6 3000 1000 500
10 x 16 15 0.6 10.5 17.5 5.0 ± 0.5 1.9 2500 1000 500
10 x 20 16 0.6 10.5 22.0 5.0 ± 0.5 2.2 2000 800 500
13 x 20 17 0.6 13.5 22.0 5.0 ± 0.5 4.0 1500 400 300
13 x 25 18 0.6 13.5 27.0 5.0 ± 0.5 5.0 1000 400 300
16 x 25 19 0.8 16.5 27.0 7.5 ± 0.5 8.0 750 200 200
16 x 31 20 0.8 16.5 33.5 7.5 ± 0.5 9.0 600 200 200
16 x 35 21 0.8 16.5 37.5 7.5 ± 0.5 11.0 500 200
18 x 35 22 0.8 18.5 37.5 7.5 ± 0.5 14.5 400 150
18 x 40 23 0.8 18.5 42.0 7.5 ± 0.5 16.0 400 150
Ø D
Ø d
F15
min.
5
min.
L
Ø D
Ø d
4+ 1
0
F
+-
Dimensions of pitch F see Table 1 and Table 2
Case Ø D = 5 mm to 8 mm; pitch F is 5 mm
038 RSU
www.vishay.com Vishay BCcomponents
Revision: 28-Feb-17 3Document Number: 28309
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
• Unless otherwise specified, all electrical values in Table 2 apply
at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %.
ORDERING EXAMPLE
Electrolytic capacitor 038 series
470 μF / 25 V; ± 20 %
Nominal case size:Ø 10 mm x 12 mm; form TFA
Ordering code: MAL2 038 36471 E3
Former 12NC: 2222 038 36471
Table 2
ELECTRICAL DATA
SYMBOL DESCRIPTION
CRRated capacitance at 100 Hz, tolerance ± 20 %
IRRated RMS ripple current at 100 Hz, 85 ºC
IL2 Max. leakage current after 2 min at UR
tan Max. dissipation factor at 100 Hz
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
CR
100 Hz
(μF)
NOMINAL
CASE SIZE
Ø D x L
(mm)
IR
100 Hz
85 ºC
(mA)
IL2
2 min
(μA)
tan
100 Hz
FREQ.
CODE (1)
ORDERING CODE MAL2038 .......
BULK PACKAGING TAPED AMMOPACK
LONG LEADS CUT LEADS
FORM
CA
F
(mm)
FORM
CB
F
(mm)
FORM
TFA
F
(mm)
FORM
TNA
F
(mm)
6.3
220 5 x 11 200 14 0.23 MF2 53221E3 2.0 - - 33221E3 5.0 73221E3 2.5
330 6.3 x 11 270 21 0.23 MF2 53331E3 2.5 - - 33331E3 5.0 73331E3 2.5
470 6.3 x 11 320 30 0.23 MF2 53471E3 2.5 - - 33471E3 5.0 73471E3 2.5
1000 8 x 11.5 540 63 0.23 MF2 53102E3 3.5 - - 33102E3 5.0 73102E3 3.5
2200 10 x 16 785 139 0.25 MF3 53222E3 5.0 63222E3 5.0 33222E3 5.0 - -
3300 10 x 20 1185 208 0.27 MF3 53332E3 5.0 63332E3 5.0 33332E3 5.0 - -
4700 13 x 20 1545 296 0.29 MF3 53472E3 5.0 63472E3 5.0 33472E3 5.0 - -
6800 13 x 25 1880 428 0.33 MF3 53682E3 5.0 63682E3 5.0 33682E3 5.0 - -
10 000 16 x 25 2330 630 0.41 MF3 53103E3 7.5 63103E3 7.5 33103E3 7.5 - -
22 000 18 x 40 3320 1386 0.65 MF3 53223E3 7.5 63223E3 7.5 - - - -
10
100 5 x 11 145 10 0.20 MF2 54101E3 2.0 - - 34101E3 5.0 74101E3 2.5
220 5 x 11 160 22 0.20 MF2 54221E3 2.0 - - 34221E3 5.0 74221E3 2.5
330 6.3 x 11 290 33 0.20 MF2 54331E3 2.5 - - 34331E3 5.0 74331E3 2.5
470 6.3 x 11 350 47 0.20 MF2 54471E3 2.5 - - 34471E3 5.0 74471E3 2.5
1000 10 x 12 650 100 0.20 MF2 54102E3 5.0 64102E3 5.0 34102E3 5.0 - -
2200 10 x 20 1070 220 0.22 MF3 54222E3 5.0 64222E3 5.0 34222E3 5.0 - -
3300 13 x 20 1420 330 0.24 MF3 54332E3 5.0 64332E3 5.0 34332E3 5.0 - -
4700 13 x 25 1780 470 0.26 MF3 54472E3 5.0 64472E3 5.0 34472E3 5.0 - -
6800 16 x 25 2220 680 0.30 MF3 54682E3 7.5 64682E3 7.5 34682E3 7.5 - -
10 000 16 x 35 2760 1000 0.38 MF3 54103E3 7.5 64103E3 7.5 - - - -
16
100 5 x 11 160 16 0.16 MF2 55101E3 2.0 - - 35101E3 5.0 75101E3 2.5
220 6.3 x 11 260 35 0.16 MF2 55221E3 2.5 - - 35221E3 5.0 75221E3 2.5
330 8 x 11.5 370 53 0.16 MF2 55331E3 3.5 - - 35331E3 5.0 75331E3 3.5
470 8 x 11.5 440 75 0.16 MF2 55471E3 3.5 - - 35471E3 5.0 75471E3 3.5
1000 10 x 16 785 160 0.16 MF2 55102E3 5.0 65102E3 5.0 35102E3 5.0 - -
2200 13 x 20 1295 352 0.18 MF3 55222E3 5.0 65222E3 5.0 35222E3 5.0 - -
3300 13 x 25 1655 528 0.20 MF3 55332E3 5.0 65332E3 5.0 35332E3 5.0 - -
4700 16 x 25 2090 752 0.22 MF3 55472E3 7.5 65472E3 7.5 35472E3 7.5 - -
6800 16 x 31 2520 1088 0.26 MF3 55682E3 7.5 65682E3 7.5 35682E3 7.5 - -
10 000 18 x 35 2920 1600 0.34 MF3 55103E3 7.5 65103E3 7.5 - - - -
038 RSU
www.vishay.com Vishay BCcomponents
Revision: 28-Feb-17 4Document Number: 28309
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
25
100 6.3 x 11 190 25 0.14 MF2 56101E3 2.5 - - 36101E3 5.0 76101E3 2.5
220 8 x 11.5 320 55 0.14 MF2 56221E3 3.5 - - 36221E3 5.0 76221E3 3.5
330 8 x 11.5 440 83 0.14 MF2 56331E3 3.5 - - 36331E3 5.0 76331E3 3.5
470 10 x 12 545 118 0.14 MF2 56471E3 5.0 66471E3 5.0 36471E3 5.0 - -
1000 10 x 20 955 250 0.14 MF2 56102E3 5.0 66102E3 5.0 36102E3 5.0 - -
2200 13 x 25 1540 550 0.16 MF3 56222E3 5.0 66222E3 5.0 36222E3 5.0 - -
3300 16 x 25 1975 825 0.18 MF3 56332E3 7.5 66332E3 7.5 36332E3 7.5 - -
4700 16 x 31 2420 1175 0.20 MF3 56472E3 7.5 66472E3 7.5 36472E3 7.5 - -
6800 18 x 35 2880 1700 0.24 MF3 56682E3 7.5 66682E3 7.5 - - - -
35
47 5 x 11 130 17 0.12 MF1 50479E3 2.0 - - 30479E3 5.0 70479E3 2.5
100 6.3 x 11 210 35 0.12 MF2 50101E3 2.5 - - 30101E3 5.0 70101E3 2.5
220 8 x 11.5 385 77 0.12 MF2 50221E3 3.5 - - 30221E3 5.0 70221E3 3.5
330 10 x 12 490 116 0.12 MF2 50331E3 5.0 60331E3 5.0 30331E3 5.0 - -
470 10 x 16 740 165 0.12 MF2 50471E3 5.0 60471E3 5.0 30471E3 5.0 - -
1000 13 x 20 1145 350 0.12 MF2 50102E3 5.0 60102E3 5.0 30102E3 5.0 - -
2200 16 x 25 1785 770 0.14 MF3 50222E3 7.5 60222E3 7.5 30222E3 7.5 - -
3300 16 x 35 2275 1155 0.16 MF3 50332E3 7.5 60332E3 7.5 - - - -
4700 18 x 35 2700 1645 0.18 MF3 50472E3 7.5 60472E3 7.5 - - - -
50
22 5 x 11 95 11 0.10 MF1 51229E3 2.0 - - 31229E3 5.0 71229E3 2.5
33 5 x 11 125 17 0.10 MF1 51339E3 2.0 - - 31339E3 5.0 71339E3 2.5
47 6.3 x 11 165 24 0.10 MF1 51479E3 2.5 - - 31479E3 5.0 71479E3 2.5
100 8 x 11.5 260 50 0.10 MF2 51101E3 3.5 - - 31101E3 5.0 71101E3 3.5
220 10 x 12 455 110 0.10 MF2 51221E3 5.0 61221E3 5.0 31221E3 5.0 - -
330 10 x 16 585 165 0.10 MF2 51331E3 5.0 61331E3 5.0 31331E3 5.0 - -
470 10 x 20 755 235 0.10 MF2 51471E3 5.0 61471E3 5.0 31471E3 5.0 - -
1000 13 x 25 1340 500 0.10 MF2 51102E3 5.0 61102E3 5.0 31102E3 5.0 - -
2200 16 x 31 1885 1100 0.12 MF3 51222E3 7.5 61222E3 7.5 31222E3 7.5 - -
3300 18 x 35 2500 1650 0.14 MF3 51332E3 7.5 61332E3 7.5 - - - -
63
2.2 5 x 11 28 3.0 0.09 MF1 58228E3 2.0 - - 38228E3 5.0 78228E3 2.5
3.3 5 x 11 34 3.0 0.09 MF1 58338E3 2.0 - - 38338E3 5.0 78338E3 2.5
4.7 5 x 11 45 3.0 0.09 MF1 58478E3 2.0 - - 38478E3 5.0 78478E3 2.5
10 5 x 11 70 6.3 0.09 MF1 58109E3 2.0 - - 38109E3 5.0 78109E3 2.5
22 5 x 11 105 14 0.09 MF1 58229E3 2.0 - - 38229E3 5.0 78229E3 2.5
33 6.3 x 11 140 21 0.09 MF1 58339E3 2.5 - - 38339E3 5.0 78339E3 2.5
47 6.3 x 11 170 30 0.09 MF1 58479E3 2.5 - - 38479E3 5.0 78479E3 2.5
100 10 x 12 320 63 0.09 MF2 58101E3 5.0 68101E3 5.0 38101E3 5.0 - -
220 10 x 16 490 139 0.09 MF2 58221E3 5.0 68221E3 5.0 38221E3 5.0 - -
330 10 x 20 710 208 0.09 MF2 58331E3 5.0 68331E3 5.0 38331E3 5.0 - -
470 13 x 20 900 296 0.09 MF2 58471E3 5.0 68471E3 5.0 38471E3 5.0 - -
1000 16 x 25 1560 630 0.09 MF2 58102E3 7.5 68102E3 7.5 38102E3 7.5 - -
2200 18 x 35 1950 1386 0.11 MF3 58222E3 7.5 68222E3 7.5 - - - -
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
CR
100 Hz
(μF)
NOMINAL
CASE SIZE
Ø D x L
(mm)
IR
100 Hz
85 ºC
(mA)
IL2
2 min
(μA)
tan
100 Hz
FREQ.
CODE (1)
ORDERING CODE MAL2038 .......
BULK PACKAGING TAPED AMMOPACK
LONG LEADS CUT LEADS
FORM
CA
F
(mm)
FORM
CB
F
(mm)
FORM
TFA
F
(mm)
FORM
TNA
F
(mm)
038 RSU
www.vishay.com Vishay BCcomponents
Revision: 28-Feb-17 5Document Number: 28309
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1) Determines the applicable row in the table “Multiplier of Ripple Current (IR) as a Function of Frequency”
CAPACITANCE (C)
Fig. 6 - Typical multiplier of capacitance
as a function of ambient temperature
Fig. 7 - Typical multiplier of capacitance
as a function of frequency
100
2.2 5 x 11 33 3.0 0.08 MF1 59228E3 2.0 - - 39228E3 5.0 79228E3 2.5
3.3 5 x 11 40 3.3 0.08 MF1 59338E3 2.0 - - 39338E3 5.0 79338E3 2.5
4.7 5 x 11 48 4.7 0.08 MF1 59478E3 2.0 - - 39478E3 5.0 79478E3 2.5
10 6.3 x 11 80 10 0.08 MF1 59109E3 2.5 - - 39109E3 5.0 79109E3 2.5
22 6.3 x 11 115 22 0.08 MF1 59229E3 2.5 - - 39229E3 5.0 79229E3 2.5
33 8 x 11.5 145 33 0.08 MF1 59339E3 3.5 - - 39339E3 5.0 79339E3 3.5
47 10 x 12 235 47 0.08 MF1 59479E3 5.0 69479E3 5.0 39479E3 5.0 - -
100 10 x 20 370 100 0.08 MF2 59101E3 5.0 69101E3 5.0 39101E3 5.0 - -
220 13 x 25 675 220 0.08 MF2 59221E3 5.0 69221E3 5.0 39221E3 5.0 - -
330 13 x 25 825 330 0.08 MF2 59331E3 5.0 69331E3 5.0 39331E3 5.0 - -
470 16 x 25 1070 470 0.08 MF2 59471E3 7.5 69471E3 7.5 39471E3 7.5 - -
1000 18 x 40 2410 1000 0.08 MF2 59102E3 7.5 69102E3 7.5 - - - -
ADDITIONAL ELECTRICAL DATA
PARAMETER CONDITIONS VALUE
Voltage
Surge voltage Us 1.15 x UR
Reverse voltage Urev 1 V
Current
Leakage current After 2 min at URIL2 0.01 CR x UR or 3 μA,
whichever is greater
After 5 min at URIL5 0.002 CR x UR + 3 μA
Inductance
Equivalent series inductance (ESL)
Case Ø D 8 mm Typ. 13 nH
Case Ø D = 10 mm Typ. 16 nH
Case Ø D 12.5 mm Typ. 18 nH
Resistance
Equivalent series resistance (ESR) Calculated from tan max. and CR (see Table 2) ESR = tan /2 f CR
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
CR
100 Hz
(μF)
NOMINAL
CASE SIZE
Ø D x L
(mm)
IR
100 Hz
85 ºC
(mA)
IL2
2 min
(μA)
tan
100 Hz
FREQ.
CODE (1)
ORDERING CODE MAL2038 .......
BULK PACKAGING TAPED AMMOPACK
LONG LEADS CUT LEADS
FORM
CA
F
(mm)
FORM
CB
F
(mm)
FORM
TFA
F
(mm)
FORM
TNA
F
(mm)
- 60 - 40 - 20 0 20 40 60 80
Tamb (°C)
C
0
C
C0 = Capacitance at 20 °C, 100 Hz
1.2
1.1
1.0
0.9
0.8
0.7
0.6
3
2
1
1
2
3
Curve 1: 10 V
Curve 2: 63 V
Curve 3: 100 V
103104
102
10 f (Hz)
Tamb (20 °C)
C
0
C
C0 = Capacitance at 20 °C, 100 Hz
1.1
1.0
0.9
0.8
0.7
0.6
3
2
1
Curve 1: 10 V
Curve 2: 63 V
Curve 3: 100 V
038 RSU
www.vishay.com Vishay BCcomponents
Revision: 28-Feb-17 6Document Number: 28309
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RIPPLE CURRENT AND USEFUL LIFE
Table 3
Note
• Multiplier of useful life code: CCC205
Fig. 8 - Multiplier of useful life as a function of ambient temperature and ripple current load
ENDURANCE TEST DURATION AND USEFUL LIFE
NOMINAL CASE SIZE
Ø D x L
(mm)
ENDURANCE
AT 85 °C
(h)
USEFUL LIFE
AT 85 °C
(h)
5 x 11 2000 2500
6.3 x 11 2000 2500
8 x 11.5 2000 2500
10 x 12 3000 3500
10 x 16 3000 3500
10 x 20 3000 3500
13 x 20 3000 3500
13 x 25 3000 3500
16 x 25 3000 3500
16 x 31 3000 3500
16 x 35 3000 3500
18 x 35 3000 3500
18 x 40 3000 3500
3.3
3.2
3.0
2.8
2.6
2.4
2.2
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.5
0.0
3.1
40 50 60 70 80 90 100
Tamb (°C)
Lifetime multiplier
(1)
70
50
4.0
6.0
2.0
1.5
30
15
10
3.0
20
1.0
IA
IR
CCC205
IA = Actual ripple current at 100 Hz
IR = Rated ripple current at 100 Hz, 85 °C
Useful life at 85 °C and IR applied:
Case Ø D ≤ 8 mm: 2500 h
Case Ø D ≥ 10 mm: 3500 h
038 RSU
www.vishay.com Vishay BCcomponents
Revision: 28-Feb-17 7Document Number: 28309
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Table 4
Table 5
Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the
lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability.
MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY
FREQ.
CODE
FREQUENCY (Hz)
50 100 500 1000 10 000
IR MULTIPLIER
MF1 0.70 1.00 1.30 1.40 1.50
MF2 0.75 1.00 1.20 1.30 1.35
MF3 0.80 1.00 1.10 1.12 1.15
TEST PROCEDURES AND REQUIREMENTS
TEST PROCEDURE
(quick reference) REQUIREMENTS
NAME OF TEST REFERENCE
Endurance IEC 60384-4 /
EN 130300
subclause 4.13
Tamb = 85 °C; UR applied;
Case Ø 8 mm: 2000 h
Case Ø 10 mm: 3000 h
C/C: ± 20 %
tan 2 x spec. limit
IL5 spec. limit
Useful life CECC 30301
subclause 1.8.1
Tamb = 85 °C; UR and IR applied;
Case Ø 8 mm: 2500 h
Case Ø 10 mm: 3500 h
C/C: ± 50 %
tan 3 x spec. limit
IL5 spec. limit
no short or open circuit
total failure percentage: 1 %
Shelf life
(storage at high
temperature)
IEC 60384-4 /
EN 130300
subclause 4.17
Tamb = 85 °C; no voltage applied; 1000 h
after test: UR to be applied for 30 min, 24 h to 48 h
before measurement
C/C: ± 20 %
tan 2 x spec. limit
IL5 3 x spec. limit
Surge IEC 60384-4 /
EN 130300
subclause 4.14
From source of 1.15 x UR:
RC = 0.1 s ± 0.05 s;
1 000 cycles of 30 s on,
330 s off, at 85 °C
C/C: ± 25 %
tan 1.5 x spec. limit
IL5 spec. limit
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 01-Jan-2021 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
