Series 209/210 Data Sheet (R) Electrocomponents Through Hole DIP Switch AUTO-DIP (R) Switch Automatically Insertable, Wave Solderable, Board Washable DIP Switch Features Optimized Mechanical Features * Fully sealed to withstand insertion shock, wave solder temperatures, and board washing * Positive detent separated from contactor * Compatible with Amistar, DynaPert, Universal, NETCO assembly and other machines Optimized Contact System * Redundant, wiping contact * Contactor does not deflect during actuation * Available low profile, medium and extended height actuator Materials * Series 209 - gold plated beryllium copper contacts * Series 210 - gold flash plated beryllium copper contacts * High temperature materials (UL94V-0) * RoHS compliant Series 209 - Premium AUTO-DIP Switches Series 210 - Economical AUTO-DIP Switches Electrical and Mechanical Specifications Switch Function SPST- 2 through 10 and 12 positions Switch Contact Resistance Switch Series 209 210 Initial, max. 25 milliohms 100 milliohms End of life, max. 50 millohms 500 millohms Insulation Resistance 1,000 megohms minimum between insulated terminals Dielectric Strength 500 VDC for 1 minute between adjacent switches Nonswitching Rating 100 mA or 50 VDC maximum Switch Capacitance 5 pF maximum between adjacent closed switches Actuation Life Series 209: 2,000 cycles switching @ 100 mA, 20 VDC or @ .1 mA, 5 VDC (dry circuit) Series 210: 1,000 cycles switching @ 100 mA, 20 VDC or @ .1 mA, 5 VDC (dry circuit) 1-2 CTS Electrocomponents Allowable Solder Time Up to 5 seconds at 260C Vibration Per MIL-STD-202F, method 204D, condition B (.06" or 15 G's between 10 HZ to 2K HZ) with no contact inconsistencies greater than 1 microsecond. Shock Per MIL-STD-202F, method 213B, condition A (50 G's) with no contact inconsistencies greater than 1 microsecond. Sealing Standard bottom seal Optional top tape seal Operating Temperature -40C to +85C Packaging Standard : Anti-Static tube packaging (c) 2008 CTS Corporation. All rights reserved. Information subject to change. 12/30/08 www.ctscorp.com CTS AUTO-DIP (R) SERIES CONTACT FEATURES 1. Value of Redundant (Bifurcated) Contacts: Redundancy dramatically reduces the probability of contact failure, IMPROVING RELIABILITY. 2. Wiping contact action 2. Value of Wiping Contact Action: Clean contact area, IMPROVING RELIABILITY. 3. Value of Contactor Not Deflecting During Actuation : Constant contact pressure eliminates overstressing contacts, IMPROVING RELIABILITY. 1. Redundant (bifurcated) cross radial contactor TRAVEL 1.0 .039 0.70 .028 ON 3.62 .143 CTS 0.25 .010 X45 CHAMFER (2) +0.15 -0.00 +.005 -.000 1 2 3 4 5 10 11 "A" OVERALL DIMENSION 8.00 .315 DATE CODE 209 6.700.25 .264.010 4. Value of Detent Separate from Contactor: Separate detent allows optimization of nondeflecting contactor and detent designs, IMPROVING RELIABILITY. 4. Detent separate from contactor 3. Contactor does not deflect during actuation +0.64 8.25 -0.38 .325 +.025 -.015 12 AUTO INSERTABLE TERMINAL SERIES DESIGNATION(209, 210) "A" 0.25 .010 0.30 .012 +0.15 -0.00 +.005 -.000 8.00 .315 NO. OF SWITCH POSITIONS 6.55/.258 2 9.09/.358 3 11.63/.458 4 14.17/.558 5 16.71/.658 6 19.25/.758 7 21.79/.858 8 24.33/.958 9 26.87/1.058 10 31.95/1.258 12 +0.05 3.80 -0.10 .150 +.002 -.004 7.62 .300 TYP. 4.58 max 3.2 .126 +0.64 7.62 -0.38 .300 +.025 -.015 0.550.08 .022.003 TYP. STRAIGHT TERMINAL 2.54 .100 TYP. 1.50 .059 TYP. 2.54 .100 TYP. O 0.8 TYP. DIMENSION: mm inch Ordering Information 209/210 - M S T F D BLANK : SHIP AT ON POSITION F : SHIP AT OFF POSITION XX: NO. OF POSITION E: EXTENDED HEIGHT ACTUATOR(0.6mm/.024") M: MEDIUM ACTUATOR(0.25mm/.010") LP: LOW PROFILE (Flush) 2-2 CTS Electronic Components 12 BLANK : NO TOP TAPE SEAL * T: TOP TAPE SEAL * Not available on Extended BLANK : AUTO-INSERTABLE TERMINAL D : STRAIGHT TERMINAL actuator S: BOTTOM SEAL (c) 2008 CTS Corporation. All rights reserved. Information subject to change. 12/30/08 www.ctscorp.com