OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 8/09
Page 1 of 21
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
SMD, SOP and SSOP Packages
Description:
The OPIA series optocouplers are d esigned for applications that use an analog output (Phototransistor or
Photodarlington) in a surface mount packag e. A wide selection of configurations are available. With typical
isolation voltage of 5,000 Volts(RMS), these prod ucts meet typical power system isolation requirements.
Theory of operation: The LED transmitt er is u sed to illuminate the Photosensor providing electrical isolation
between two power syste ms while maintaining the ability to transmit information from one power syste m to the
other. In many applications, analog signal levels may be required to be transmitted between two power systems
while maintaining isolation between the power systems up to 5,000 Volts(RMS). A variety of LED and
photosensor configuratio ns are available depending on the system requirements.
The ratio Current Transfer Ratio (CTR) is determined using the output current and input current for analog
photosensors. CTR ratios can range from as low as 5 to over 9,000 depending on the device.
All SMD products are shipped in a ship ping tube with “TR” identified on the end of the part number.
Example: OPIA817ATRE is a 4-Pin SMD shipped in tape and reel (TR)
Features:
• 5,000 Vrms electrical isolation
• Choice of a Single and Dual LED
• Phototransistor or Photo Darlington Sensor
• Low-cost plastic Dual-In-Line (DIP) package
Agency Approvals:
• UL Certification No: E58730
• VDE No: 40026625 40026536, 40026654
RoHS
Applications:
• High voltage isolation: 5,000 Volts(RMS)
• PCBoard power system isolation
• Industrial equipment power isolation
• Medical equipment power isolation
• Office equipment
200100*
10
20 ==
−
−
=mA
mA
Current
L
ED CurrentrPhotosenso
CTR
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A 8/09
Page 2 of 21
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
SMD, SOP and SSOP Packages
Part Number Pin #
1 2 3 4
OPIA817A A K E C
OPIA814A A-K K-A E C
OPIA815A A K E C
OPIA4010A A K E C
OPIA1210A A K E C
Package Style A
(SMD)
Package Style B
(SOP)
Package Style C
(SSOP)
Package Outline Dimensions and Schematics: Top-View
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 8/09
Page 3 of 21
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
SMD, SOP and SSOP Packages
Analog Output Devices Ordering Information
Part Number Isolation Voltage
Max. (Vrms) CTR
Min/Typ/Max Typ. Tr / Tf (µs)
RL = 100 ohms Package Configuration
OPIA817A 5,000 50 / - / 600 4 / 3 4-Pin SMD A K—C E
OPIA814A 5,000 60 / - / 600 5 / 4 4-Pin SMD A K, K A—C E
OPIA815A 5,000 70 / - / - 80 / 72 4-Pin SMD A K—C E (Dar)
OPIA4010A 5,000 600 / - / 9,000 60 / 50 4-Pin SMD A K—C E (Dar)
OPIA1210A 5,000 50 / - / 600 2 / 3 4-Pin SMD A K—C E
Configuration: Definition of Terms
LED Identification—Sensor Id entification
Configuration
Information LED A = Anode K = Cathode
Sensor B = Base C = Collector E = Emitter (Dar) = Photodarlington
Packaging Part Number Suffix: TU = Shipped in Tubes Example: OPIA817DTUE
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A 8/09
Page 4 of 21
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
SMD, SOP and SSOP Packages
Absolute Maximum Ratings (TA = 25o C unless otherwise noted)
Storage Temperature
OPIA817, OPIA4010, OPIA1210
-55° C to +125° C
Operating Temperature
All except the part numbers noted below
-30° C to +100° C
Isolation voltage (1 minute)
OPIA817, OPIA814, OPIA815, OPIA4010, OPIA1210
5,000 Vrms
Total Package Power Dissipation
OPIA817, OPIA814, OPIA815, OPIA4010, OPIA1210
200 mW
Lead Soldering Temperature (1/16” (1.6 mm) from case for 5 seconds with soldering iron) 260° C
Input Diode
Continuous Forward Current
All except the part number noted below
50 mA
Peak Forward current (1 µs pulse width, 300 pps)
All except the part number noted below
1 A
Reverse Voltage
OPIA817, OPIA815, OPIA4010, OPIA1210, OPIA814, OPIA4010
6 V
Power Dissipation
OPIA817, OPIA814, OPIA4010, OPIA1210, OPIA815
70 mW
Output Phototransistor
Collector-Emitter Voltage
OPIA817, OPIA814
OPIA4010
OPIA815
OPIA1210
60 V
300 V
35 V
350 V
Emitter-Collector Voltage
OPIA817, OPIA814, OPIA815
OPIA4010
OPIA1210
6 V
0.1 V
7 V
Collector Current
OPIA817, OPIA814, OPIA1210, OPIA414
OPIA4010
OPIA815
50 mA
150 mA
80 mA
Power Dissipation
All except the part numbers noted below
OPIA4010
150 mW
200 mW
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 8/09
Page 5 of 21
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
SMD, SOP and SSOP Packages
Electrical Characteristics
SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS
Input Diode
VF
Forward Voltage
All except those noted below
OPIA1210
-
1.0
1.2
1.2
1.4
1.3
V
IF = 20 mA
IF = 10 mA
VFM
Peek Forward Voltage
OPIA814, OPIA4010
OPIA817, OPIA815, OPIA1210
-
-
-
-
3.5
3.0
V
IFM = 500 mA
IR
Reverse Current
All except those noted below
OPIA814
OPIA1210
-
-
-
-
-
-
10
10
µA
VR = 4 V
-
VR = 5 V
Ct
Terminal Capacitance
All except those noted below
OPIA815
-
-
30
30
-
250
pf
V = 0.0 V, f = 1K Hz
V = 0.0 V, f = 1K Hz
Output Phototransistor
ICEO
Collector dark Current
OPIA817, OPIA814
OPIA1210
-
-
-
10
100
200
nA
IF = 0 mA, VCE = 20 V
IF = 0 mA, VCE = 300 V
VCE(SAT)
Collector-emitter Saturation Voltage
OPIA817
OPIA814
OPIA1210
-
-
-
0.1
0.1
-
0.2
0.3
0.4
V
IF = 20 mA, IC = 1 mA
IF = 20 mA, IC = 1 mA
IF = 8 mA, IC = 2.4 mA
fC Cutt-Off frequency
All except those noted below
OPIA817, OPIA814, OPIA1210
-
-
-
80
-
-
K Hz
VCC = 5 V, IC = 2 mA, RL = 100 Ω
tR
Rise Time
OPIA817
OPIA814
OPIA1210
-
-
-
4
5
2
18
20
-
µs
VCC = 2 V, IC = 2 mA, RL = 100 Ω
VCC = 2 V, IC = 2 mA, RL = 100 Ω
VCC = 10 V, IC = 2 mA, RL = 100 Ω
tF
Fall Time
OPIA817D
OPIA814
OPIA1210
-
-
-
3
4
3
18
20
-
µs
VCC = 2 V, IC = 2 mA, RL = 100 Ω
VCC = 2 V, IC = 2 mA, RL = 100 Ω
VCC = 10 V, IC = 2 mA, RL = 100 Ω
Continued on Next Page
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A 8/09
Page 6 of 21
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
SMD, SOP and SSOP Packages
Electrical Characteristics (OPIA817 Series) - Continued from Previous Page
SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS
Output PhotoDarlington
ICEO
Collector dark Current
OPIA4010
OPIA815
-
-
-
-
1.0
1.0
µA
IF = 0 mA, VCE = 200 V
IF = 0 mA, VCE = 10 V
VCE(SAT)
Collector-emitter Saturation Voltage
OPIA815
OPIA4010
-
-
0.8
-
1.0
1.5
V
IF = 20 mA, IC = 5 mA
IF = 20 mA, IC = 5 mA
fC
Cut-Off frequency
OPIA815
OPIA4010
1.0
-
6.0
7.0
-
-
K Hz
VCC = 2 V, IC = 20 mA, RL = 100 Ω
VCC = 5 V, IC = 2 mA, RL = 100 Ω
tR
Rise Time
OPIA815
OPIA4010
-
-
-
80
60
300
300
µs
VCC = 2 V, IC = 20 mA, RL = 100 Ω
VCC = 2 V, IC = 20mA, RL = 100 Ω
tF
Fall Time
OPIA815
OPIA4010
-
-
72
50
250
250
µs
VCC = 2 V, IC = 20 mA, RL = 100 Ω
VCC = 2 V, IC = 20 mA, RL = 100 Ω
Coupled Characteristics
CTR
Current Transfer Ratio
OPIA817, OPIA1210
OPIA814
OPIA815
OPIA4010
50
60
70
600
-
-
-
-
600
600
-
9,000
%
IF = 5.00 mA, VCE = 5.0 V
IF = 1.00 mA, VCE = 2.0 V
IF = 0.05 mA, VCE = 3.3 V
IF = 1.00 mA, VCE = 2.0 V
Cf Floating Capacitance
- 0.6 1.0 pF V = 0.0 V, f = 1M Hz
RISO Isolation resistance 5X1010 1011 - ohm C500V, 40% to 60%RH
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 8/09
Page 7 of 21
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
SMD, SOP and SSOP Packages
OPIA814
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A 8/09
Page 8 of 21
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
SMD, SOP and SSOP Packages
OPIA814
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 8/09
Page 9 of 21
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
SMD, SOP and SSOP Packages
OPIA815
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A 8/09
Page 10 of 21
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
SMD, SOP and SSOP Packages
OPIA815
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 8/09
Page 11 of 21
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
SMD, SOP and SSOP Packages
OPIA817
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A 8/09
Page 12 of 21
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
SMD, SOP and SSOP Packages
OPIA817
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 8/09
Page 13 of 21
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
SMD, SOP and SSOP Packages
OPIA1210
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A 8/09
Page 14 of 21
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
SMD, SOP and SSOP Packages
OPIA1210
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 8/09
Page 15 of 21
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
SMD, SOP and SSOP Packages
OPIA4010
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A 8/09
Page 16 of 21
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
SMD, SOP and SSOP Packages
OPIA4010
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 8/09
Page 17 of 21
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
SMD, SOP and SSOP Packages
Quality / Reliability Requirements
Note: This is to be performed when a change occurs to form, fit or function.
Government and Industry Standard
Compliance Requirements
European Union’s Reduction of Hazardous Substances (RoHS) Directive 2002/95/EC
Parameter Failure Criteria Conditions
HTRB D IC(OFF) ± 10% 11 samples after 500Hrs
0 Fail @ VCE = 5.0VDC, Ta = 70°C
HTFB D IC(ON) ± 10% 50 samples after 96Hrs
0 Fail @ Max PD, Ta = 25°C
MTTF @ 90% confidence 150,000 Min. @ 25°C, 25mADC
Moisture Sensitivity Level MSL 1 per JDEC stnd J-STD-020 B
Lead Solderability 0 Fail per Method 208 of MIL-STD-202.
Glass Transition of body 125°C Min. DSC test method
Temperature Humidity-Bias ± 20% 85°C, 85%RH, 500Hrs, 80% min Iceo
Temperature Cycle ± 20% per Method 1010.7 of MIL-STD-883E
High Temperature Storage ± 20% 85°C, 500Hrs
Autoclave 0 Fail
TA = 121°C, Pressure = 15psi, Humidit y
= 100%, Time = 96Hrs
Label Identification
DESCRIPTION:
Size: 3” (7.4 cm) X 2.2” (5.5 cm)
Lettering shall be black on white background.
Format shall be as:
Notes:
1. The DATE CODE is a 4-digit code for date of manufacture where YY is
the last two digits of the year, and WW is week n umber of manufacture.
2. The LOT I.D. is the manufacturing location lot identification where Y is
the year of manufacture, NNNN is a sequential lot identifier, and DDD is
the day of the year of manufacture. – or use equivalent label format.
Carrollton, TX, USA
MADE IN TAIWAN
OPTEK P/N __OPIA407C-TR__
IIIIIIIIIIIIIIIIIIIII
QTY. ________N/A_________
IIIIIIIIIIIIIIIIIIIII
DATE CODE _____(YYWW)___
IIIIIIIIIIIIIIIIIIIII
LOT I.D. ____(Y-NNNNDDD)__
IIIIIIIIIIIIIIIIIIIII
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A 8/09
Page 18 of 21
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
SMD, SOP and SSOP Packages
Tube Packaging Information:
Optek's Optocoupler
Part Numbers Packaging
Quantities
Tube Inner Small Carton Medium Carton Large Carton
Qty Weight
52 x 7 x 7.5
cm 53.5 x 16 x 17.5 cm 53.5 x 30.7 x 17.5
cm 53.5 x 30.7 x 25 cm
Qty Weight Qty Weight
Gross
Weight Qty Weight
Gross
Weight Qty Weight
Gross
Weig
ht
P/H
and
SMD
4-PIN
OPIA817D/A, OPIA814D/A -
OPIA1210D/A 100 44 3,000 1.40 12,000 6.0 6.5 24,000 12.0 12.5 36,000 18.0 18.5
6-PIN
OPIA6XXD/A Series 65 44 1,950 1.50 7,800 6.5 7.0 15,600 12.0 12.5 23,400 18.5 19.0
8-PIN
OPIA8XXD Series and OPID804D 48 44 1,440 1.44 5,760 6.0 6.5 11,520 12.0 12.5 17,290 18.0 18.5
M/F
SOP
4-PIN and 5-PIN
OPIA401B - OPIA404B, OPIA414B,
OPIA500B 100 24 6,000 1.60 24,000 6.5 7.0 48,000 13.0 13.5 72,000 19.5 20.0
SSOP 4-PIN
OPIA405C - OPIA409C 170 -- 10,200 --
P/H = Pin-Hole Packages (Referred as D = Dual-In-L ine Package)
SMD = Standard Surface Mount Packages (Referred as A = 6.5mil SMD)
M/F or SOP = Mini-Flat Packages or Small Outside Packages (Referred as B = 4.40mil SM D w/ 2.54mil Lead-
Spacing)
SSOP = Shrink SOP Packages (Referred as C = 3.60mil SMD with 1.27mil Lead-Spacing)
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 8/09
Page 19 of 21
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
SMD, SOP and SSOP Packages
Tube Packaging Specifications—SMD— (TU):
Quantity: 4-pin (SMD): 100pcs/tube
DIMENSIONS ARE IN: INCHES [MILLIMETERS]
TOLERANCE: ± 0.008 INCHES
[± 0.2 MILLIMETERS]
Tube Packaging Specifications— SOP (Mini-flats) and SSOP— (TU):
Quantity: 4-pin (SOP): 100pcs/tube
4-pin (SSOP): 170pcs/tube
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A 8/09
Page 20 of 21
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
SMD, SOP and SSOP Packages
Tape and Reel Packaging Specifications— SMD and SOP—(TR):
Quantity: 4-pin (SMD): 1000p cs/Reel
4-pin (SOP): 1000pcs/Reel
4-pin (SSOP): 3000pcs/Reel
DIMENSIONS ARE IN: INCHES [MILLIMETERS]
TOLERANCE: ± 0.008 INCHES
[± 0.2 MILLIMETERS]
Tape Feeder:
Direction:
Reel:
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 8/09
Page 21 of 21
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
SMD, SOP and SSOP Packages
Tape and Reel Packaging Specifications— SSOP—(TR):
Quantity: 4-pin (SSOP): 2000pcs/Reel
Ø.059±0.004
[Ø1.50±0.05]
.157±0.008
[4.0±0.02 ]
.078±0.008
[2.0±0.02]
0.068±0.008
[1.75 ±0.02]
0.088±0.008 [2.25 ±0.02]
.157±0.008]
[4.0±0.02]
.100±0.008
[2.55±0.02]
0.285±0.008 [7.25 ±0.02]
Ø.059±0.004
[Ø1.50±0.05]
0.472±0.008 [12.0 ±0.02]
Ø.531±0.02
[Ø13.5±0.5] Ø.098±0.02
[2.5±0.5]
Ø.826±0.04 [Ø21±1.0]
Ø7.00±0.04 [Ø178±1.0 ]
2.36±0.04 [60±1.0]
.511±0.04 [13±0.5]
.629±0.04 [16.0±0.5]
Direction:
Reel:
DIMENSIONS ARE IN: INCHES [MILLIMETERS]
TOLERANCE: ± 0.008 INCHES
[± 0.2 MILLIMETERS]
