tray packaging packaging unit 48 pcs Variante 1 3 3,2 18 5 x 18 = 90 max. 138 6 14,5 6,3 -0,25 Verpackt in Tray Verpackungseinheit 48 St. version 1 Leiterplatte powerless assembly pcb +0,2 Ansaughaube nur bei Version 1 7 x 36 = 252 16 off Direction 24 21,2 Variante 2 version 2 12,6 0,3 Bestuckung mit Kraft assembly with force 56 13,8 Pin 1 max. 325 Sonstige Angaben siehe Zeichnung 204628 / Additional indications according to drawing 204628 Verpackt in Gurtverpackung - Tape on Reel Packaging Verpackungseinheit: 75 Stuck - Packaging unit: 75 pcs Abspulrichtung - Reel 31 -0,4 hood only on version 1 36 Bestuckung kraftlos 0,6 25 0,1 150 56,5 Pin 1 330 Mutter / nut Bolzen / bolt thread depth max. 3,5 mm thread depth max. 5,5 mm max. Einschraubtiefe 5,5 mm max. Einschraubtiefe 3,5 mm Layoutvorschlag: recommended layout: 4 x 2,74 = 10,96 A +0,09 1 -0,06 3,7 Gewinde / thread M3 / #4-40 Gewinde / thread M3 / #4-40 2,74 B Pin 1 3,2 0,1 6,4 0,05 0,05 (9x) 2,84 ohne / without 1,37 B 2,74 3 x 2,74 = 8,22 25 0,05 Beschriftung nach Bedruckungsvorschrift 174538 Part marking according to specification 174538 234433 234438 234443 234437 234442 234447 234436 234441 234446 Anschlussbereich verzinnt terminal area tin plating Anforderungsstufe: 2 class: 2 #4-40 M3 234435 234440 234445 234435 234439 234444 Ident-Nr. part-no. tape &reel Variante 1 version 1 Ident.-Nr. Ident.-Nr. Variante 1 Variante 2 part-no. tray version 1 part-no. tray version 2 #4-40 M3 ohne without A Fehlende Masse und Angaben siehe DIN 41652 / Missing information and dimensions according to DIN 41652 Sonstige Angaben siehe Fertigungsunterlagen / Additional indications according to the production documentation X Mutter thread Bolzen Bemerkung bolt remark Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. M 1:1 0,05 Sonstige Angaben siehe Zeichnung 204625 / Additional indications according to drawing 204625 2:1 Scale Tolerances Information: All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. TMC-S 09-THR-3,0-6,0-BA8 TMC-S 09-THR-3,0-6,0-type 8 224838 www.ERNI.com C 25.01.2010 Index Date Class TMCS I A3