Z0103/07/09 series Triacs Rev. 02 -- 12 September 2002 Product data 1. Product profile 1.1 Description Passivated triacs in conventional and surface mounting packages. Intended for use in applications requiring high bidirectional transient and blocking voltage capability. Available in a range of gate current sensitivities for optimum performance. Product availability: Z0103MA; Z0103NA; Z0107MA; Z0107NA; Z0109MA; Z0109NA in SOT54B Z0103MN; Z0103NN; Z0107MN; Z0107NN; Z0109MN; Z0109NN in SOT223. 1.2 Features Blocking voltage to 800 V (NA and NN 1 A on-state RMS current. types) 1.3 Applications Home appliances Fan controllers Small motor control Small loads in industrial process control. 2. Pinning information Table 1: Pinning - SOT54B (TO-92), SOT223, simplified outline and symbol Pin Description 1 terminal 2 (T2) 2 gate (G) 3 terminal 1 (T1) Simplified outline SOT54B (TO-92) 4 1 1 terminal 1 (T1) 2 terminal 2 (T2) 3 gate (G) Symbol SOT223 T2 2 3 G MSB033 T1 1 4 terminal 2 (T2) 2 Top view SOT54B (TO-92) 3 MSB002 - 1 SOT223 MBL300 Z0103/07/09 series Philips Semiconductors Triacs 3. Ordering information 3.1 Ordering options Table 2: Ordering information Part Number Voltage (VDRM) Gate Sensitivity (IGT) Package Z0103MA 600 V 3 mA SOT54B (TO-92) Z0103NA 800 V 3 mA SOT54B (TO-92) Z0107MA 600 V 5 mA SOT54B (TO-92) Z0107NA 800 V 5 mA SOT54B (TO-92) Z0109MA 600 V 10 mA SOT54B (TO-92) Z0109NA 800 V 10 mA SOT54B (TO-92) Z0103MN 600 V 3 mA SOT223 Z0103NN 800 V 3 mA SOT223 Z0107MN 600 V 5 mA SOT223 Z0107NN 800 V 5 mA SOT223 Z0109MN 600 V 10 mA SOT223 Z0109NN 800 V 10 mA SOT223 4. Limiting values Table 3: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter VDRM VRRM Min Max Unit Z0103/07/09MA; Z0103/07/09MN - 600 V Z0103/07/09NA; Z0103/07/09NN - 800 V - 600 V - 800 V t = 20 ms - 8 A t = 16.7 ms - 8.5 A repetitive peak off-state voltage repetitive peak reverse voltage Conditions 25 C Tj 125 C 25 C Tj 125 C Z0103/07/09MA; Z0103/07/09MN Z0103/07/09NA; Z0103/07/09NN ITSM IT(RMS) non-repetitive peak on-state current RMS on-state current full sine wave; Tj = 25 C prior to surge; Figure 2 and Figure 3 all conduction angles; Figure 4 SOT223 Tsp = 90 C - 1 A SOT54B (TO-92) Tlead = 50 C - 1 A t = 10 ms - 0.35 A2s I2t I2t dIT/dt rate of rise of on-state current ITM = 1.0 A; IG = 2 x IGT; dIG/dt = 100 mA/s - 20 A/s IGM peak gate current tp = 20 s - 1.0 A PGM peak gate power - 2.0 W PG(AV) average gate power - 0.1 W Tstg storage temperature -40 +150 C Tj junction temperature -40 +125 C for fusing over any 20 ms period (c) Koninklijke Philips Electronics N.V. 2002. All rights reserved. 9397 750 10102 Product data Rev. 02 -- 12 September 2002 2 of 12 Z0103/07/09 series Philips Semiconductors Triacs 003aaa199 1.6 = Ptot (W) (A) 180 1.2 003aaa200 10 ITSM 8 120 90 6 60 0.8 4 30 0.4 2 0 0 0 0.4 0.8 1.2 1 102 10 IT(RMS) (A) = conduction angle n 103 n = number of cycles at f = 50 Hz Fig 1. Maximum on-state power dissipation as a function of RMS on-state current; typical values. Fig 2. Maximum permissible non-repetitive peak on-state current as a function of number of cycles for sinusoidal currents; typical values. 003aaa207 102 003aaa201 1.2 ITSM IT/t limit (A) IT(RMS) (A) 10 0.8 SOT223 (Tsp) SOT54B (Tlead) 1 0.4 10-1 10-5 10-4 10-3 ts (s) 10-2 Fig 3. Maximum permissible non-repetitive peak on-state current as a function of surge duration for sinusoidal currents; typical values. 0 0 100 150 Tlead, Tsp (C) Fig 4. Maximum permissible RMS on-state current as a function of lead temperature and solder point temperature; typical values. (c) Koninklijke Philips Electronics N.V. 2002. All rights reserved. 9397 750 10102 Product data 50 Rev. 02 -- 12 September 2002 3 of 12 Z0103/07/09 series Philips Semiconductors Triacs 5. Thermal characteristics Table 4: Thermal characteristics Symbol Parameter Conditions Min Typ Max Unit Rth(j-sp) thermal resistance from junction to solder point for SOT223 Figure 5 - - 25 K/W Rth(j-lead) thermal resistance from junction to lead for SOT54B (TO-92) Figure 5 - - 60 K/W Rth(j-a) thermal resistance from junction to ambient SOT223 minimum footprint; mounted on a PCB - 60 - K/W SOT54B (TO-92) vertical in free air - 150 - K/W 5.1 Transient thermal impedance 003aaa206 10 a 1 SOT223 10-1 SOT54B 10-2 10-3 10-4 10-5 10-4 10-3 10-2 10-1 1 10 102 tp (s) 103 Z th ( j - lead ) a = --------------------------for SOT54B (TO-92) R th ( j - lead ) Z th ( j - sp ) a = ---------------------- for SOT223 R th ( j - sp ) Fig 5. Transient thermal impedance from junction to lead and junction to solder point as a function of pulse duration. (c) Koninklijke Philips Electronics N.V. 2002. All rights reserved. 9397 750 10102 Product data Rev. 02 -- 12 September 2002 4 of 12 Z0103/07/09 series Philips Semiconductors Triacs 6. Characteristics Table 5: Characteristics Tj = 25 C unless otherwise specified. Symbol Parameter Conditions Min Typ Max Unit VD = 12 V; RL = 30 ; T2+ G+; T2+ G-; T2- G-; Figure 9 Static characteristics IGT gate trigger current Z0103MA/MN/NA/NN - - 3 mA Z0107MA/MN/NA/NN - - 5 mA Z0109MA/MN/NA/NN - - 10 mA - - 5 mA Z0107MA/MN/NA/NN - - 7 mA Z0109MA/MN/NA/NN - - 10 mA - - 7 mA Z0107MA/MN/NA/NN - - 10 mA Z0109MA/MN/NA/NN - - 15 mA - - 15 mA - - 20 mA - - 25 mA Z0103MA/MN/NA/NN - - 7 mA Z0107MA/MN/NA/NN - - 10 mA Z0103MA/MN/NA/NN IL latching current Z0103MA/MN/NA/NN Z0103MA/MN/NA/NN VD = 12 V; RL = 30 ; T2- G+; Figure 9 VD = 12 V; RL = 30 ; T2+ G+; T2- G-; T2- G+; Figure 7 VD = 12 V; RL = 30 ; T2+ G-; Figure 7 Z0107MA/MN/NA/NN Z0109MA/MN/NA/NN IH holding current IT = 50 mA; Figure 8 - - 10 mA VT on-state voltage Z0109MA/MN/NA/NN Figure 6 - 1.3 1.6 V VGT gate trigger voltage VD = 12 V; RL = 30 ; Tj = 25 C; Figure 11 - - 1.3 V VD = VDRM; RL = 3.3 k; Tj = 125 C; Figure 11 0.2 - - V VD = VDRM(max); VR = VRRM(max); Tj = 125 C - - 500 A Z0103MA/MN/NA/NN 10 - - V/s Z0107MA/MN/NA/NN 20 - - V/s Z0109MA/MN/NA/NN 50 - - V/s ID off-state leakage current Dynamic characteristics dVD/dt dVcom/dt critical rate of rise of off-state voltage critical rate of change of commutating voltage VD = 0.67 VDRM(max); Tj = 110 C; exponential waveform; gate open; Figure 10 VD = 400 V; IT = 1 A; Tj = 110 C; dIcom/dt = 0.44 A/ms; gate open Z0103MA/MN/NA/NN 0.5 - - V/s Z0107MA/MN/NA/NN 1 - - V/s Z0109MA/MN/NA/NN 2 - - V/s (c) Koninklijke Philips Electronics N.V. 2002. All rights reserved. 9397 750 10102 Product data Rev. 02 -- 12 September 2002 5 of 12 Z0103/07/09 series Philips Semiconductors Triacs 003aaa202 8 IT (A) a 125 C typ 6 003aaa203 3 2 4 125 C max 25 C max 2 1 0 0 1 2 0 -50 3 VT (V) 0 50 100 150 Tj (C) IL a = -----------------I L ( 25 C ) Fig 6. On-state current as a function of on-state voltage; typical and maximum values. Fig 7. Normalized latching current as a function of junction temperature; typical values. 003aaa204 3 003aaa205 4 T2+ G+ T2+ GT2- G+ T2- G- a a 3 2 2 1 1 0 -50 0 50 100 150 0 -50 0 Tj (C) 100 150 Tj (C) I GT a = ---------------------I IH a = ------------------I H ( 25 C ) GT ( 25 C ) Fig 8. Normalized holding current as a function of junction temperature; typical values. Fig 9. Normalized gate trigger current as a function of junction temperature; typical values. (c) Koninklijke Philips Electronics N.V. 2002. All rights reserved. 9397 750 10102 Product data 50 Rev. 02 -- 12 September 2002 6 of 12 Z0103/07/09 series Philips Semiconductors Triacs 003aaa208 1.6 003aaa209 1.6 a a 1.2 1.2 0.8 0.8 0.4 0.4 0 0 50 100 150 0 -50 0 Tj (C) 100 150 Tj (C) dV D dt a = ---------------------------------dV D ( 25C ) dt V GT a = -----------------------V GT ( 25 C ) Fig 10. Normalized critical rate of rise of off-state voltage as a function of junction temperature; typical values. Fig 11. Normalized gate trigger voltage as a function of junction temperature; typical values. (c) Koninklijke Philips Electronics N.V. 2002. All rights reserved. 9397 750 10102 Product data 50 Rev. 02 -- 12 September 2002 7 of 12 Z0103/07/09 series Philips Semiconductors Triacs 7. Package outline Plastic single-ended leaded (through hole) package; 3 leads SOT54B c E d A L b 1 D e1 2 e 3 b1 L1 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A b b1 max c D d E e e1 L L1(1) mm 4.8 4.4 0.45 0.36 0.48 0.43 0.33 4.7 4.5 1.7 1.4 3.7 3.4 2.54 1.27 15.2 12.7 1.55 1.45 Note 1. Terminal dimensions within this zone are uncontrolled to allow for flow of plastic and terminal irregularities. OUTLINE VERSION SOT54B REFERENCES IEC JEDEC JEITA TO-92 EUROPEAN PROJECTION ISSUE DATE 02-01-29 Fig 12. SOT54B (TO-92). (c) Koninklijke Philips Electronics N.V. 2002. All rights reserved. 9397 750 10102 Product data Rev. 02 -- 12 September 2002 8 of 12 Z0103/07/09 series Philips Semiconductors Triacs Plastic surface mounted package; collector pad for good heat transfer; 4 leads D SOT223 E B A X c y HE v M A b1 4 Q A A1 1 2 3 Lp bp e1 w M B detail X e 0 2 4 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A1 bp b1 c D E e e1 HE Lp Q v w y mm 1.8 1.5 0.10 0.01 0.80 0.60 3.1 2.9 0.32 0.22 6.7 6.3 3.7 3.3 4.6 2.3 7.3 6.7 1.1 0.7 0.95 0.85 0.2 0.1 0.1 OUTLINE VERSION SOT223 REFERENCES IEC JEDEC EIAJ SC-73 EUROPEAN PROJECTION ISSUE DATE 97-02-28 99-09-13 Fig 13. SOT223. (c) Koninklijke Philips Electronics N.V. 2002. All rights reserved. 9397 750 10102 Product data Rev. 02 -- 12 September 2002 9 of 12 Z0103/07/09 series Philips Semiconductors Triacs 8. Revision history Table 6: Revision history Rev Date 02 CPCN 20020912 Description Product data; supersedes data of 11 April 2002 Table 5 "Characteristics" Addition of dVcom/dt data. Correction to dVD/dt data 01 20020411 - Product data; initial version (9397 750 09419) (c) Koninklijke Philips Electronics N.V. 2002. All rights reserved. 9397 750 10102 Product data Rev. 02 -- 12 September 2002 10 of 12 Z0103/07/09 series Philips Semiconductors Triacs 9. Data sheet status Data sheet status[1] Product status[2] Definition Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Changes will be communicated according to the Customer Product/Process Change Notification (CPCN) procedure SNW-SQ-650A. [1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. 10. Definitions 11. Disclaimers Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support -- These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Right to make changes -- Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Contact information For additional information, please visit http://www.semiconductors.philips.com. For sales office addresses, send e-mail to: sales.addresses@www.semiconductors.philips.com. Product data Fax: +31 40 27 24825 (c) Koninklijke Philips Electronics N.V. 2002. All rights reserved. 9397 750 10102 Rev. 02 -- 12 September 2002 11 of 12 Philips Semiconductors Z0103/07/09 series Triacs Contents 1 1.1 1.2 1.3 2 3 3.1 4 5 5.1 6 7 8 9 10 11 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Pinning information . . . . . . . . . . . . . . . . . . . . . . 1 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Ordering options . . . . . . . . . . . . . . . . . . . . . . . . 2 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2 Thermal characteristics. . . . . . . . . . . . . . . . . . . 4 Transient thermal impedance . . . . . . . . . . . . . . 4 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 8 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 10 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 11 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 (c) Koninklijke Philips Electronics N.V. 2002. Printed in The Netherlands All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 12 September 2002 Document order number: 9397 750 10102