KBL401G THRU KBL407G Single Phase 4.0 AMPS. Glass Passivated Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 4.0 Amperes KBL Features UL Recognized File # E-96005 Glass passivated junction Ideal for printed circuit board Reliable low cost construction High surge current capability High temperature soldering guaranteed: 260OC / 10 seconds / 0.375" ( 9.5mm ) lead length at 5 lbs. ( 2.3 Kg ) tension Leads solderable per MIL-STD-202, Method 208 Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol KBL KBL KBL Type Number KBL KBL KBL KBL 401G 402G 403G 404G 405G 406G 407G Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current @TA = 50 Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 4.0A Maximum DC Reverse Current @ TA=25 at Rated DC Blocking Voltage @ TA=125 Typical Thermal Resistance (Note) VRRM VRMS VDC 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 1000 560 700 800 1000 Units V V V I(AV) 4.0 A IFSM 150 A VF 1.1 V IR 10 500 19 2.4 -55 to +150 -55 to +150 uA uA /W RJA RJL TJ TSTG Note: Thermal Resistance from Junction to Ambient and from Junction to Lead Mounted on P.C.B. With 0.6" x 0.6" (16mm x 16mm) Copper Pads. Operating Temperature Range Storage Temperature Range - 652 http://store.iiic.cc/ RATINGS AND CHARACTERISTIC CURVES (KBL401G THRU KBL407G) FIG.1- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER BRIDGE ELEMENT FIG.2- MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT. (A) PEAK FORWARD SURGE CURRENT. (A) 5 250 150 100 50 0 1 100 10 4 3 2 1 0 1000 0 50 NUMBER OF CYCLES AT 60Hz FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER BRIDGE ELEMENT 1.0 0.1 0 Tj=25 C PULSE WIDTH-300 S 1% DUTY CYCLE .6 .8 1.0 1.2 FIG.4- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT 100 INSTANTANEOUS REVERSE CURRENT. ( A) INSTANTANEOUS FORWARD CURRENT. (A) 10.0 0.01 .4 150 100 o AMBIENT TEMPERATURE. ( C) 1.4 TJ=125 0C 10 1 TJ=25 0C 0.1 1.6 INSTANTANEOUS FORWARD VOLTAGE. (V) 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) - 653 http://store.iiic.cc/ 140