Tentative Engineering Bulletin Vertical Surface Mount Type Aluminum Electrolytic Capacitors No.704E / Jan.2009 @Endurance : 1,000 to 2,000 hours at 105C @Rated voltage range : 6.3 to 50V @Nominal capacitance range : 0.1 to 1,000MF @Case sizes : F4B5.5L to F10B10.5L @Solvent resistant type @RoHS Compliant ?SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tane) Low Temperature Characteristics (Max. Impedance Ratio) Endurance -40 to +105C 6.3 to 50Vdc P20%(M) (at 20C,120Hz) I=0.01CV or 3MA, whichever is greater Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V) (at 20C, after 2 minute) 6.3V 10V 16V 25V 35V 50V Rated voltage(Vdc) D55 to F55 0.30 0.24 0.20 0.16 0.14 0.12 tanE(Max.) F80/H63 to JA0 0.40 0.30 0.26 0.16 0.14 0.12 (20C, 120Hz) 6.3 10 16 25 35 50 Rated voltage(Vdc) 4 3 2 2 2 2 Z(-25C)/Z(+20C) 4 3 3 10 8 6 Z(-40C)/Z(+20C) (120Hz) The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for the specified period of time at 105C. F80,H63,HA0,JA0 Sizes D55 to F55 2,000 hours Time 1,000 hours [P20% of the initial value Capacitance change [P30% of the initial value [200% of the initial specified value D.F. (tanE) [300% of the initial specified value [The initial specified value Leakage current [The initial specified value ?DIMENSIONS [mm] ?PART NUMBERING SYSTEM 1 @Terminal Code : A 2 3 4 5 6 7 8 9 10 12 13 14 15 16 17 18 0.3max. LP0.3 (Note) Supplement code Size code Capacitance tolerance code Capacitance code (ex. 47MF:470,100MF:101) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100,25V:250) Series code Category P CP0.2 BP0.2 FDP0.5 W AP0.2 Note : LP0.5 for H63 to JA0 Size code D55 E55 F55 F80 H63 HA0 JA0 11 E MK A A A A A D A A A A M A A A G D L A B C 4 5.2 4.3 4.3 5.1 5 5.2 5.3 5.3 5.9 6.3 5.2 6.6 6.6 7.2 6.3 7.7 6.6 6.6 7.2 8 6.3 8.3 8.3 9.0 8 10.0 8.3 8.3 9.0 10 10.0 10.3 10.3 11.0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 P 1.0 1.4 1.9 1.9 2.3 3.1 4.5 ?MARKING EX) 16V100MF @Rated voltage code Rated voltage (Vdc) 6.3 Code j 1R 100 CKA 10 A 16 C 25 E 35 V 50 H ?STANDARD RATINGS WV Cap (Vdc) (mF) 6.3 10 16 25 35 Size code tane Rated ripple current (mArms/105c, 120Hz) Part No. 22 D55 47 E55 100 F55 330 HA0 1,000 JA0 33 E55 100 F80 (100) (H63) 220 HA0 10 D55 22 E55 47 F55 470 JA0 33 F55 47 F80 (47) (H63) 100 HA0 330 JA0 4.7 D55 0.30 0.30 0.30 0.40 0.40 0.24 0.30 (0.30) 0.30 0.20 0.20 0.20 0.26 0.16 0.16 (0.16) 0.16 0.16 0.14 21 36 56 290 410 34 90 (90) 180 16 30 48 460 45 80 (80) 180 450 15 EMKA6R3ADA220MD55G EMKA6R3ADA470ME55G EMKA6R3ADA101MF55G EMKA6R3ADA331MHA0G EMKA6R3ADA102MJA0G EMKA100ADA330ME55G EMKA100ADA101MF80G EMKA100ADA101MH63G EMKA100ADA221MHA0G EMKA160ADA100MD55G EMKA160ADA220ME55G EMKA160ADA470MF55G EMKA160ADA471MJA0G EMKA250ADA330MF55G EMKA250ADA470MF80G EMKA250ADA470MH63G EMKA250ADA101MHA0G EMKA250ADA331MJA0G EMKA350ADA4R7MD55G Note : Parenthesized capacitances are sub-standard parts. WV Cap (Vdc) (mF) Size code tane Rated ripple current (mArms/105c, 120Hz) Part No. 10 E55 22 F55 35 33 F80 (33) (H63) 220 JA0 0.10 D55 0.22 D55 0.33 D55 0.47 D55 1.0 D55 2.2 D55 3.3 D55 50 4.7 E55 10 F55 22 F80 (22) (H63) 33 HA0 47 HA0 100 JA0 0.14 0.14 0.14 (0.14) 0.14 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 (0.12) 0.12 0.12 0.12 25 40 80 (80) 375 1.3 2.6 3.2 3.8 5.6 10 14 19 29 70 (70) 140 170 310 EMKA350ADA100ME55G EMKA350ADA220MF55G EMKA350ADA330MF80G EMKA350ADA330MH63G EMKA350ADA221MJA0G EMKA500ADAR10MD55G EMKA500ADAR22MD55G EMKA500ADAR33MD55G EMKA500ADAR47MD55G EMKA500ADA1R0MD55G EMKA500ADA2R2MD55G EMKA500ADA3R3MD55G EMKA500ADA4R7ME55G EMKA500ADA100MF55G EMKA500ADA220MF80G EMKA500ADA220MH63G EMKA500ADA330MHA0G EMKA500ADA470MHA0G EMKA500ADA101MJA0G Specifications in this bulletin are subject to change without notice. NIPPON CHEMI-CON CORPORATION 1456 1