Microchip Technology Incorporated
Package Contents
·dsPICDEM.net Connectivity Board with
Pre-programmed dsPIC30F Device
·RS-232 Cable
·CAT 5 Crossover Cable
·Power Supply
·Example Software and Documentation on CD
Host System Requirements
·PC-compatible system with an Intel Pentium®class or
higher processor, or equivalent
·A minimum of 16 MB RAM
·A minimum of 40 MB available hard drive space
·CD ROM drive
·Microsoft Windows®98, Windows NT®4.0, Windows
2000 or Windows XP
Summary
The dsPICDEM.net 1 and dsPICDEM.net 2 connectivity
development boards provide the application developer a
basic connectivity platform for developing and evaluating
various connectivity solutions, implementing TCP/IP protocol
layers, combined with V.22bis/V.22 ITU specifications
across PSTN or Ethernet communication channels.
The board comes with an ITU-T compliant V.22bis/V.22
modem demonstration program loaded on the installed
dsPIC30F6014 device. This program enables the user to
connect and transfer data between the dsPIC®Soft Modem
(dsPIC SM) and an ITU-T compliant reference modem.
Control of the dsPIC SM is supported via AT commands
communicated using the on-chip UART channel.
Also included are CMX-Micronet WEB and FTP Server
demonstration files which when downloaded into the
dsPIC30F6014 device demonstrate two TCP/IP stack-based
applications over the Ethernet Datalink layer.
Finally,a simple tutorial written in C code is provided which
can be run with both MPLAB®ICD 2 and MPLAB ICE 4000
development tools.
Features
Key features of the dsPICDEM.net 1 and dsPICDEM.net 2
Connectivity Development Boards include:
·dsPIC30F6014 Plug-in Sample
·10-Base T Ethernet MAC and PHY Interface
·PSTN Interface with DAA/AFE Chipset
·Serial Communication Channels Interface
(UART and CAN)
·External I2C™ EEPROM Memory for Storing Constants
·External 64K x 16 SRAM Memory
·General Purpose Prototyping Area with Expansion
Header
·2 x 16 LCD Display
·MPLAB ICD 2 and MPLAB ICE 4000 Emulator Support
·LED’s, Switches and Potentiometers
·Temperature Sensor
dsPICDEM.net™ 1 and dsPICDEM.net 2
Connectivity Development Boards
The Microchip name and logo, the Microchip logo, dsPIC, KEELOQ, MPLAB, PIC, PICmicro, PICSTART, PRO MATE and PowerSmart are registered trademarks of Microchip Technology Incorporated
in the U.S.A. and other countries. FilterLab, microID, MXDEV, MXLAB, PICMASTER, SEEVAL and The Embedded Control Solutions Company are registered trademarks of Microchip Technology
Incorporated in the U.S.A. Accuron, Application Maestro, dsPICDEM, dsPICDEM.net, ECAN, ECONOMONITOR, FanSense, FlexROM, fuzzyLAB, In-Circuit Serial Programming, ICSP, ICEPIC,
microPort, Migratable Memory, MPASM, MPLIB, MPLINK, MPSIM, PICC, PICkit, PICDEM, PICDEM.net, PowerCal, PowerInfo, PowerMate, PowerTool, rfLAB, rfPIC, Select Mode, SmartSensor,
SmartShunt, SmartTel and Total Endurance are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. Serialized Quick Turn Programming (SQTP) is a service mark of
Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies.
© 2003, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved. 10/03
DS51431A
*DS51431A*
Microchip Technology Inc. •2355 W. Chandler Blvd. •Chandler, AZ 85224-6199 USA •(480) 792-7200 •FAX(480) 792-7277
Part Numbers and Ordering Information:
Development Tools from Microchip
MPLAB®IDE Integrated Development Environment (IDE)
MPASM™ Assembler Universal PICmicro macro-assembler
MPLINK™ Linker/MPLIB™ Librarian Linker/Librarian
MPLAB C17 C compiler for PIC17CXXX MCUs
MPLAB C18 C compiler for PIC18CXXX MCUs
MPLAB SIM Simulator Software Simulator
MPLAB ICD 2In-Circuit Debugger
MPLAB ICE 2000 Full-featured modular in-circuit emulator
PICSTART® Plus Programmer Entry-level development kit with programmer
PRO MATE® II Device Programmer Full-featured, modular device programmer
KEELOQ®Evaluation Kit Encoder/Decoder evaluator
KEELOQ Transponder Evaluation KitTransmitter/Transponder evaluator
microID™ Developer’s Kit 125 kHz and 13.56 MHz RFID development tools
MCP2510 CAN Developer’s Kit MCP2510 CAN evaluation/development tool
Americas
Atlanta (770) 640-0034
Boston (978) 692-3848
Chicago (630) 285-0071
Dallas (972) 818-7423
Detroit (248) 538-2250
Kokomo (765) 864-8360
Los Angeles (949) 263-1888
Phoenix (480) 792-7966
San Jose (408) 436-7950
Toronto (905) 673-0699
Asia/Pacific
Australia 61-2-9868-6733
China – Beijing 86-10-85282100
China – Chengdu 86-28-86766200
China – Fuzhou 86-591-7503506
China – Hong Kong SAR 852-2401-1200
China – Qingdao 86-532-5027355
China – Shanghai 86-21-6275-5700
China – Shenzhen 86-755-82901380
China – Shunde 86-765-8395507
India 91-80-2290061
Japan 81-45-471- 6166
Korea 82-2-554-7200
Singapore 65-6334-8870
Taiwan 886-2-2717-7175
Taiwan – Kaohsiung 886-7-536-4818
Europe
Austria 43-7242-2244-399
Denmark 45-4420-9895
France 33-1-69-53-63-20
Germany 49-89-627-144-0
Italy 39-0331-742611
Netherlands 31-416-690399
United Kingdom 44-118-921-5869
As of 9/1/03
dsPICDEM.net 1 and dsPICDEM.net 2 Connectivity Development Boards
Part Number Description Availability
DM300004-1 dsPICDEM.net 1 Development Board Q4 2003
Supports dsPIC30F5013 and dsPIC30F6014 devices.
(Supporting FCC/JATE PSTN, Ethernet NIC)
DM300004-2 dsPICDEM.net 2 Development Board Q4 2003
Supports dsPIC30F5013 and dsPIC30F6014 devices.
(Supporting CTR-21 PSTN, Ethernet NIC)
