AN48830B
33
■ Absolute Maximum Ratings
Parameter Symbol Rating Unit
Supply voltage VCC 5V
Output voltage VOUT 5V
Supply current ICC 5mA
Output current IOUT 15 mA
Power dissipation *1, *2PD60 mW
Operating ambient temperature *1Topr −25 to +75 °C
Storage temperature *1Tstg −55 to +125 °C
Note) *1: Except for the power dissipation, operating ambient temperature and storage temperature, all ratings are for Ta = 25°C.
*2: Ta = 75°C. For the independent IC without a heat sink. Please use within the range of power dissipation, refering to PD Ta curve.
■ Recommended Operating Range
Parameter Symbol Range Unit
Supply voltage VCC 2.5 to 3.5V
■ Electrical Characteristics Ta = 25°C ± 2°C
Parameter Symbol Conditions Min Typ Max Unit
Operating magnetic flux density 1BH-LS VCC = 3 V 6mT
Operating magnetic flux density 2
*1BH-LN VCC = 3 V −6 mT
Operating magnetic flux density 3
*2BL-HS VCC = 3 V 0.5 mT
Operating magnetic flux density 4
*2BL-HN VCC = 3 V − 0.5mT
Output voltage 1VOLS VCC = 3 V, IO = 2 mA, B = 6.0 mT 0.1 0.3V
Output voltage 2VOLN VCC = 3 V, IO = 2 mA, B = −6.0 mT 0.1 0.3V
Output voltage 3VOHS VCC = 3 V, IO = −2 mA, B = 0.5 mT 2.7 2.9V
Output voltage 4VOHN VCC = 3 V, IO = −2 mA, B = − 0.5 mT 2.7 2.9V
Supply current 1 *3ICCAVE VCC = 3 V 3.5 7.0µA
Note) *1: Symbol BH-LS , BH-LN stands for the operating magnetic flux density where its output level varies from high to low.
*2: Symbol BL-HS , BL-HN stands for the operating magnetic flux density where its output level varies from low to high.
*3: ICCAVE = {ICCON × tON + ICCOFF × tOFF}/{tON + tOFF}
Design reference data
Parameter Symbol Conditions Min Typ Max Unit
Hysteresis width 1BWS VCC = 3 V 1.2mT
Hysteresis width 2BWN VCC = 3 V 1.2mT
Supply current 2ICCON VCC = 3 V 1.4mA
Supply current 3ICCOFF VCC = 3 V 2 µA
Operating time tON VCC = 3 V 20 µs
Stop time tOFF VCC = 3 V 20.5ms
Note) It will operate normally in approximately 41 ms after power on.