Surface Mount Zener Diodes CZRW5221B-G thru CZRW5259B-G Voltage: 2.4 ~ 39 Volts Power: 500 mW Features: Planar Die Constructions SOD-123 500mW Power Dissipation .028 (0.70) .019 (0.50) Ideally Suited for Automated Assembly Processes .071 (1.80) .055 (1.40) .154 (3.90) .141 (3.60) Zener Voltages from 2.4V ~ 39V .110 (2.80) .098 (2.50) .008 (0.20) Max. Case: SOD-123, Molded Plastic Terminals: Solderable per MIL-STD-202, Method 208 Polarity: See Diagram Below Mounting position: Any Approx. Weight: 0.008 gram .053 (1.35) .037 (0.95) Mechanical Data: .016 (.40) Min. .005 (.12) Max. Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characterics Parameter Symbols Value Units Power Dissipation (Note A) at 75oC PD 500 mW IFSM 4 A Tj -55 to +150 Peak Forward Surge Current Surge, 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) (Note B) Operating Junction and Storage Temperature Range o C Notes: A. Mounted on 5.0mm2(.013mm thick) land areas. B. Measured on 8.3ms, single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum. "-G" suffix designated RoHS compliant version www.comchiptech.com Page1 Surface Mount Zener Diodes CZRW5221B-G thru CZRW5259B-G Maximum Ratings and Electrial Characterics (TA=25 unless otherwise noted) VF=1.2V, IF=100mA for all types Nominal Zener Voltage Max Reverse Leakage Current Max. Zener Impedance mA nA V Zener Current IZM@ TA mA 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 100 100 75 50 25 15 10 5 5 5 5 5 3 3 3 3 3 3 3 2 1 0.5 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 1 1 1 1 1 1 1 1 2 2 3 4 5 6 6 6.5 6.5 8 8.4 9.1 9.9 11 12 14 15 17 18 21 21 23 25 27 30 188 180 167 150 138 126 115 106 97 89 81 73 67 61 58 55 50 45 41 38 35 30 28 25 23 21 19.1 16.8 16.2 15.1 13.8 12.6 11.6 Part Number VZ @ IZT ZZT @ IZT Nom. V Min. V Max. V 2.4 2.5 2.7 3 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 8.7 9.1 10 11 12 13 15 16 18 20 22 24 27 28 30 33 36 39 2.28 2.38 2.57 2.85 3.14 3.42 3.71 4.09 4.47 4.85 5.32 5.89 6.46 7.13 7.79 8.27 8.65 9.5 10.45 11.4 12.35 14.25 15.2 17.1 19 20.9 22.8 25.65 26.6 28.5 31.35 34.2 37.05 2.52 2.63 2.84 3.15 3.47 3.78 4.1 4.52 4.94 5.36 5.88 6.51 7.14 7.88 8.61 9.14 9.56 10.5 11.55 12.6 13.65 15.75 16.8 18.9 21 23.1 25.2 28.35 29.4 31.5 34.65 37.8 40.95 Ohm mA ZZK @ IZK Ohm IR @ VR 500 mWatts Zener Diodes CZRW5221B-G CZRW5222B-G CZRW5223B-G CZRW5225B-G CZRW5226B-G CZRW5227B-G CZRW5228B-G CZRW5229B-G CZRW5230B-G CZRW5231B-G CZRW5232B-G CZRW5234B-G CZRW5235B-G CZRW5236B-G CZRW5237B-G CZRW5238B-G CZRW5239B-G CZRW5240B-G CZRW5241B-G CZRW5242B-G CZRW5243B-G CZRW5245B-G CZRW5246B-G CZRW5248B-G CZRW5250B-G CZRW5251B-G CZRW5252B-G CZRW5254B-G CZRW5255B-G CZRW5256B-G CZRW5257B-G CZRW5258B-G CZRW5259B-G 30 30 30 30 28 24 23 22 19 17 11 7 5 6 8 8 10 17 22 30 13 16 17 21 25 29 33 41 44 49 58 70 80 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 9.5 8.5 7.8 7 6.2 5.6 5.2 5 4.5 4.2 3.8 3.4 3.2 1200 1250 1300 1600 1600 1700 1900 2000 1900 1600 1600 1000 750 500 500 500 600 600 600 600 600 600 600 600 600 600 600 600 600 600 700 700 800 NOTE: 1. Tolerance and T ype Number Designation. The type numbers listed have a standard tolerance on the nominal zener voltage of 5%. 2. Specials Available Include: A. Nominal zener voltages between the voltages shown and tighter voltage tolerances. B. Matched sets. 3. Zener V oltage (V Z ) Measurement. Guarantees the zener voltage when measured at 90 seconds while maintaining the lead temperature (T L) at 30 O C, from the diode body . 4. Zener Impedance (Z Z ) Derivation. The zener impedance is derived from the 60 cycle ac voltage, which results when an AC current having an rms value current (I ZT or I ZK ) is superimposed on I ZT or IZK . equal to 10% of the dc zener 5. Surge Current (I R ) Non-Repetitive. The rating listed in the electrical characteristics table is maximum peak, non-repetitive, reverse surge current of 1/2 square wave or equivalent sine wave pulse of 1/120 second duration superimposed on the test current, I ZT , per JEDEC registration; however, actual device capability is as described in Figure 5. "-G" suffix designated RoHS compliant version www.comchiptech.com Page2 Surface Mount Zener Diodes CZRW5221B-G thru CZRW5259B-G 8 100 TEMPERATURE COEFFICIENT,mV/ o C) TEMPERATURE COEFFICIENT,mV/ o C) 7 6 5 4 3 2 1 0 -1 -2 -3 2 3 4 5 6 7 8 9 10 11 10 1 10 12 100 NOMINAL ZENER VOLTAGE, Volts TYPICAL REVERSE NOMINAL ZENER VOLTAGE, Volts CURRENT STEAD Y S TAT E POWER 1000 DERA TING 1000 IZ = 1 mA FORWARD CURRENT, mA DYNAMIC IMPEDANCE, O TJ=25 C IZ(AC)=0.1IZ(DC) F=1 kHZ 100 5 mA 20 mA 10 100 O 150 C 10 75OC O 25 C 1 1 10 1 0.4 100 0.5 0.6 0.8 0.9 1.0 1.1 1.2 FORWARD VOLTAGE, Volts NORMAL ZENER VOLTAGE, Volts TYPICAL FORW ARD VOL TAGE 1000 1.2 0.8 0.6 PD V.S. TA 0.4 TA=25oC 0 V BIAS 1 V BIAS 1.0 CAPACITANCE, pF POWER DISSIPATION, Watts 0.7 O 5C 100 BIAS AT 50% OF VZ NOM 10 0.2 0 25 50 75 100 TEMPERATURE ( oC) 125 150 155 1 1 10 100 NOMINAL ZENER VOLTAGE, Volts "-G" suffix designated RoHS compliant version www.comchiptech.com Page3 Surface Mount Zener Diodes CZRW5221B-G thru CZRW5259B-G 100 100 o TA=25oC 10 ZENER CURRENT, mA ZENER CURRENT, mA TA=25 C 1 0.1 0.01 0 2 4 6 8 10 12 10 1 0.1 0.01 10 30 ZENER VOLTAGE, Volts ZENER VOL TAGE V.S. ZENER 50 70 90 ZENER VOLTAGE, Volts CURRENT ZENER VOL TAGE V.S. ZENER CURRENT LEAKAGE CURRENT ( A) 1000 100 10 1 O +150 C 0.1 0.01 0.001 +25OC 0.0001 -55 C 0.00001 O 0 10 20 30 40 50 60 70 80 90 NOMINAL ZENER VOLTAGE, Vlots "-G" suffix designated RoHS compliant version www.comchiptech.com Page4