Silicon Photodiode for the Visible Spectral Range Silicon Photodiode for the Visible Spectral Range Lead (Pb) Free Product - RoHS Compliant BPW 21 Wesentliche Merkmale Features * Speziell geeignet fur Anwendungen im Bereich von 350nm bis 820nm * Angepat an die Augenempfindlichkeit (V) * Hermetisch dichte Metallbauform (ahnlich TO-5) * Especially suitable for applications from 350nm to 820nm * Adapted to human eye sensitivity (V) * Hermetically sealed metal package (similar to TO-5) Anwendungen Application * Belichtungsmesser fur Tageslicht * Fur Kunstlicht mit hoher Farbtemperatur in der Fotografie und Farbanalyse * Exposure meter for daylight * For artificial light of high color temperature in photographic fields and color analysis Typ Type Bestellnummer Ordering Code BPW 21 Q62702P0885 2005-03-30 1 BPW 21 Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Betriebs- und Lagertemperatur Operating and storage temperature range Top; Tstg - 40 ... + 80 C Sperrspannung Reverse voltage VR 10 V Verlustleistung, TA = 25 C Total power dissipation Ptot 250 mW Kennwerte (TA = 25 C, Normlicht A, T = 2856 K) Characteristics (TA = 25 C, standard light A, T = 2856 K) Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Fotoempfindlichkeit, VR = 5 V Spectral sensitivity S 10 ( 5.5) nA/Ix Wellenlange der max. Fotoempfindlichkeit Wavelength of max. sensitivity S max 550 nm Spektraler Bereich der Fotoempfindlichkeit S = 10% von Smax Spectral range of sensitivity S = 10% of Smax 350 ... 820 nm Bestrahlungsempfindliche Flache Radiant sensitive area A 7.34 mm2 2.73 x 2.73 mm x mm 55 Grad deg. IR IR 2 (30) 8 (200) nA pA Spektrale Fotoempfindlichkeit, = 550 nm Spectral sensitivity S 0.34 A/W Quantenausbeute, = 550 nm Quantum yield 0.80 Electrons Photon Leerlaufspannung, Ev = 1000 Ix Open-circuit voltage VO 400 ( 320) mV Abmessung der bestrahlungsempfindlichen Flache L x B Dimensions of radiant sensitive area Lx W Halbwinkel Half angle DunkelstromVR = 10 V Dark current VR = 5 V VR = 10 mV 2005-03-30 2 BPW 21 Kennwerte (TA = 25 C, Normlicht A, T = 2856 K) Characteristics (TA = 25 C, standard light A, T = 2856 K) (cont'd) Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Kurzschlustrom, Ev = 1000 Ix Short-circuit current ISC 10 A Anstiegs- und Abfallzeit des Fotostromes Rise and fall time of the photocurrent RL = 1 k; VR = 5 V; = 550 nm; Ip = 10 A tr, tf 1.5 ns Durchlaspannung, IF = 100 mA, E = 0 Forward voltage VF 1.2 V Kapazitat, VR = 0 V, f = 1 MHz, E = 0 Capacitance C0 580 pF Temperaturkoeffizient von VO Temperature coefficient of VO TCV - 2.6 mV/K Temperaturkoeffizient von ISC Temperature coefficient of ISC TCI - 0.05 %/K Rauschaquivalente Strahlungsleistung Noise equivalent power VR = 5V, = 550 nm NEP 7.2 x 10- 14 Nachweisgrenze, VR = 5V, = 550 nm Detection limit D* 1 x 1012 2005-03-30 3 W -----------Hz cm x Hz --------------------------W BPW 21 Relative Spectral Sensitivity Srel = f () Photocurrent IP = f (Ev), VR = 5 V Open-Circuit Voltage VO = f (Ev) Total Power Dissipation Ptot = f (TA) Dark Current Capacitance C = f (VR), f = 1 MHz, E = 0 IR = f (TA), VR = 5 V IR = f (VR) Directional Characteristics Srel = f () 2005-03-30 4 Dark Current BPW 21 Mazeichnung Package Outlines 1.55 (0.061) Radiant sensitive area Cathode 5.08 (0.200) spacing o0.45 (0.018) 3.4 (0.134) 14.5 (0.571) 3.0 (0.118) 12.5 (0.492) o5.8 (0.228) 1.75 (0.069) o6.0 (0.236) o9.5 (0.374) o9.0 (0.354) o8.3 (0.327) o8.0 (0.315) Chip position 0.6 0.8 5( 5( 0.0 0.0 33 ) 26 ) 0.3 (0.012) max Approx. weight 2 g 9) .0 03 1) ( 3 1.0 (0.0 0.8 GMOY6011 Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). Lotbedingungen Soldering Conditions Wellenloten (TTW) TTW Soldering (nach CECC 00802) (acc. to CECC 00802) OHLY0598 300 C T 10 s 250 Normalkurve standard curve 235 C ... 260 C Grenzkurven limit curves 2. Welle 2. wave 200 1. Welle 1. wave 150 ca 200 K/s 2 K/s 5 K/s 100 C ... 130 C 100 2 K/s 50 Zwangskuhlung forced cooling 0 0 50 100 150 200 t 2005-03-30 5 s 250 BPW 21 Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg www.osram-os.com (c) All Rights Reserved. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 2005-03-30 6