__. -, TA E ELECTRONICS INC elE D MM 4893465 0000439 2 = co PCB-T0-CABLE APPLICATION ALL PLASTIC DEL SERIES CONNECTORS The DEL series has printed circuit right angle mounting and board-to-cable connectors (9 positions). Suitable for personal computer input, joy sticks, bar code readers, mouse cables, and other data interfaces. The connector has an all-plastic body and stamped contacts. It comes with a right angle PCB-mounting receptacle and a straight plug using crimp contacts. @ The plug socket contacts are the stamped crimp contacts of the D*U series; available with either gold or tin plating. High volume termination of reeled contacts is economical with JAEs CBT350-2B-D*C semiautomatic tool. Materials/Finishes ; Specifications i Material Finish | [No.of Gontacts [9 | Pin Brass Gold or tin over CurrentRating | 3amp Contacts nickel Dielectric 1,000 VAC r.m.s. (1minute) Socket Copper alloy | Gold or tin over Rating Contacts nickel Insulation 5,000 megohms min. Insulator Nylon UL94 V-O, black Resistance Plug Hood | Nylon UL94 V-O, black Contact 8 milliohms max. (Initial) DustCap | Synthetic Black Resistance resin Operating 4F ~+176F Temperature | (20C ~+80C) Range Applicable Wire| AWG #22 to #28 Crimp Socket Contacts (For Plugs) Stamped insulatiqn-support crimp con- Semi-automatic tacts common with D*U and D*C connec- crimp machine: tors are used. Finishes are tin or gold CT350-2B-D*C plating, both over nickel underplate. NOTE: Plating of the contacts on the receptacle pin side should be the same as that for the plug socket contacts. Hand crimp tool: CT150-2-D*C e@ Extraction tool: JIET-D*C-20 or ET-20D Contact . Part Number . - Applicable Wire Size Size Materlals/Finishes Reefed (10,000 contacts/reel) | Loose (100 contacts/kif) AWG. Insufation outer diameter 20-22 Copper alloy/Tin plate D*C-20-22S-10000-S D*C-20-22S8-PKG100-S #22 ~#24 .047 ~6.067 a Copper alloy/Gold plate D*C-20-22S-10000 D*C-20-22S-PKG100 ($1.2 ~#1.7) @ - 20-24 Copper alloy/Tin plate D*C-20-24S-10000-S D*C-20-24S-PKG100-S #24 ~#28 6.031 ~.059 & | Copper alloy/Gold plate D*C-20-24S-10000 D*C-20-24S5-PKG100 ($0.8 ~1.5) ; a 0 2400 = D=O1 J A E ELECTRONICS INC ele D FEATURES @ Five different shell sizes and numbers of conductors The connector housing is compact and rectangular. The contacts and insulators are con- tained in a rugged steel shell. There are five shell sizes (E, A, B, C, and D), respectively with standard contact counts of 9, 15, 25, 37, and 50. Special layouts to accept coaxial, | high-voltage, and high-current contacts are also available. pe 1.213 p I | | | oFass)o} ' 2.087 (53.0) _| | | 2.634 (66.9) _> i A Shell Size: 15 Number of Conductors: 1.539 (30.8) : | (39.1) I B Shell Size: O O Gee) 25 Number of Conductors: Y 2.728 (69.3) | ee ' cee ceee ad Cc Shell Size: : eccescecocccnveccce . 37 Number ofConductors: O tcc cece cccceceece oO (126) 37 Number of Conductors: _ O Special Layouts (D*M Type) A D Shell Size: M@ 4693465 0000394 & A-/7-03 Shell Type A-C7-OS | The shell profile comes in a panel- mounting standard type and floating type (the latter aids in rack-to-panel connec- tion). A-/-// Standard Type Floating Type Type F Front Shell Panel Washer Rear Shelli The floating washer moves .030 in. (0.4 mm) in any direction relative to the center ( ), 606 50 Number of Conductors: (15.4) 1 : 6 One @ Fail-Safe Polarizing Mechanism The shell connecting part is keystone trapezoidal which inherently prevents in- correct coupling. Can be mated Tt a 5 Cannot be mated 2355 G12, O seccceecces Official Standards D Sub connectors conform to many inter- national standards Including: Japan Industrial Standards JIS-C-6361 JIS-C-6366 JiS-C-6367 Japan Defense Agency Standards NDSXC 6116 DSP C 6242 US Military Standards MIL-C-24308 @ Close Entry Construction Socket insulators have a closed entry construction which prevents entry of oversized contacts or probes. Compatibility Individual connector types are inter- changeable as are the accessories.