1
602 GB Series
CE19
High temperature Miniature Bayonet Lock
Connectors with rear insertable, rear release
crimp contacts. Connectors to EL 2112 Patt. 602
DEF STAN 59-56 & PAN 6432 -1 & -4.
Amphenol
1
AMPHENOL LIMITED
Amphenol 602 GB Series
Connectors to EL 2112 Patt. 602
DEF STAN 59-56 & PAN 6432-1 & -4
The specifications herein are given only for the guidance of trade customers. The company's policy is
one of continual development and improvement of its products and accordingly the company reserve
the right at any time to alter such specifications without notice. No information contained herein is
intended to constitute an offer of sale or reply and each prospective customer of any product should
satisfy himself before purchase that the product is suitable for his requirements.
While the information in this catalogue is restricted to standard connectors in accordance
with published military and national specifications, Amphenol have developed, and have
under development, a number of 602 series products for special applications. If you
cannot find a product in this catalogue to suit your requirements please do not hesitate
to get in touch with the factory for the latest information on new product developments.
602GB connectors are high performance environmental circular connectors for the most
demanding requirements of civil and military applications. Operating from -65°C to
+200°C: resisting solvents and fluids likely to be encountered including heavy salt spray
in ship-borne aircraft: and finally meeting the exhaustive climatic proving of BS 2G100
Part 2 Class 1.
They are directly compatible with connectors to MIL-C-26482 Series 2,
which supersedes MIL-C-83723 Series 1.
Derating
When connectors to different specifications are intermated (e.g. Pattern 602 and
MIL-C-26482 Series 11, the combination must not be operated under conditions more
severe than the less stringent clause of either specification.
2
AMPHENOL LIMITED
Contents
Construction details ..................................................................3
Specification requirements ........................................................4
Shell styles and polarisation availability ......................................5
Insert orientations ....................................................................6
Key, Keyway orientations ..........................................................7
Insert availability ......................................................................8
Ordering details, Amphenol part numbers ..................................9
Ordering details, Panavia part numbers ......................................9
Ordering details, Pattern 602 numbers ......................................10
Plugs ribbed and standard coupling ..........................................11
Flange mounting receptacle with solder/pintail contacts..............11
Flange mounting receptacle ......................................................12
Dummy receptacle ...................................................................12
Single hole mounting receptacle ................................................13
Single hole mounting receptacles with solder/pintail contacts ......13
Caps and chains .......................................................................14
Hermetic receptacles, single hole and solder mounting ...............15
Hermetic receptacle, flange mounting . ......................................16
Cable Accessories .............................................................17 & 18
Other Circular Connector Series
62GB solder miniature bayonet lock connectors
A range of 62GB connectors are qualified to BS 9522
F001 7, DEF STAN 59-35 (Part 1) Sec. 3 Patt. 105 and
MIL-C-26482E.
162GB crimp miniature bayonet lock connectors
162GB connectors are designed to qualify to BS 9522
N0001 , the successor to DEF 5326-3 (prov ) Patt. 603
1 62GB connectors are qualified to BS 9522 F0038.
Merlin I 118 Series high performance miniature
bayonet lock connectors
The series features a rear insertable, rear release individual
contact retention system with a single piece dielectric The
series are qualified to MIL-C-83723 Series 1 and MIL-C-26482
Series II. Operating temperature range is -55°C to +200°C.
Merlin II 418 Series high performance miniature
bayonet lock connectors
High density miniature circular connectors sharing the
polymeric ICR system of other Amphenol Merlin devices
Available in 50% and 100% no scoop versions to MIL-C-38999
and complying with European specifications LN 0029 729 and
UTE C 93/422 Model HE306.
Merlin III 518 Series high performance
miniature bayonet lock connectors
The series also benefits from a one piece all dielectric ICR
system reducing connector parts from 122 to 12 in the 10-6
and 24-61 configurations. There is also a marked increase in
contact dielectric separation. Qualified to MIL-C-26500 and
MIL-C-83723 Series III.
EMI/RFI/EMP filter connectors 482 Series
miniature bayonet lock connectors
Amphenol's EMI filtering connectors provide the efficiency of
a built-in filter with the reliability of a high performance
miniature connector and the advantages of crimp poke-home
contacts. The connectors are electrically and environmentally
comparable with connectors to DEF STAN 59-35 (Part. 1 ) Sec
3 Patt. 105, MIL-C-26482 and BS 9522 N0001 the successor
to DEF 5326-3 (prov.) Patt, 603.
lock connectors
48 Series connectors meet or exceed the requirements of
MIL-C-26500 and MIL-C-38300. The connectors are sealed
against extreme environments and utilise front release, rear
insertable Poke Home Contacts.
348 Series high density connectors
Sub-miniature general purpose connectors to MIL-C-8151 1
utilising a single piece dielectric retention system. Basic
constructions available are 50% and 100% scoop-proof.
97 Series standard screw coupling MS connectors
97 Series connectors are Amphenol's exclusive A and B
construction to MIL-C-5015 and supersede the original AN
range.
Hermetic seal connectors
Amphenol one piece glass to metal receptacles with pin contacts
are available in a range of styles in Series 62GB 172. 179. 48.
348, 182 Series. Facilities available for customers' special
designs.
Cables assemblies
Amphenol is fully equipped to undertake the preparation of all
types of cable assemblies complying with the military vehicles and
engineering establishments and fighting vehicles requirements of
the Ministry of Defence - the Ministry of Environment (Motorways)
for motorway control equipment - the Post Office Manufacturing
code and to the British Standards Institute when applicable to
Cable systems. Control procedures carried out in accordance with
MIN DEF 05-21 . Approval numbers BS 9000, 1043/M and CAA.
DIA/5754/58. Moulded terminations form a specialised service by
the company. The process offers such advantages as a waterproof
seal between cable and connector back-end, mechanical protection,
and a homogeneous joint between moulding and cable.
3
AMPHENOL LIMITED
Construction
Connector shells are machined from solid aluminium bar stock,
not forged or extruded. Machining has inherent advantages in
terms of strength and adaptability. 602GB connectors can be
supplied in materials other than aluminium.
The normal shell finish used, which has a high resistance to
corrosion, is cadmium plating with an olive drab chromate
treatment. Other finishes may be supplied. For nonstandard
materials or finishes consult factory for availability.
Hard dielectric insert components are glass filled epoxy, rubber
components are silicone or fluorosllicone.
The connectors have gold plated contacts with crimp
terminations. Pintail or solder bucket terminations are available
in sealed (low profile) and Hermetic receptacles.
Sealed (Low Profile) receptacles have a maximum leakage of 1
cc/ per hour at 1 atmosphere.
Hermetic connectors with glass dielectric are manufactured with mild
steel shells plated in tin over nickel and gold plated nickel alloy
contacts. Passivated stainless steel shells also available.
Configurations for size 20 contacts range between 3 contacts in the
size 8,12.7mm (0.5in. diameter) shell up to a maximum of 61
contacts in the size 24, 36.1 mm (1.5in. diameter) shell.
Intermediate sizes and contact data for heavier current ratings are
shown in the insert availability chart on page 8.
1. Fluorosilicone fluid resistant
sealing.
2 Closed entry hard front socket
insert.
3. Triple track positive bayonet locking with
visual mating indication.
4. Interfacial mating seal.
5. Triple riser wire sealing.
6. 5 key shell polarisation.
7. Peripheral shell seal.
8. Precision formed metal clip
retention system.
9. Cadmium finish shells with high
resistance to corrosion and
temperature.
Design, development and manufacture of 602GB connectors have all been carried our in the United Kingdom by Amphenol Limited
4
AMPHENOL LIMITED
602GB Series EL2112 Patt.602
Specification Requirements
Engagement & disengagement forces
Contact resistance
insulation resistance
Shell continuity
Contact retention
Sealing
Fluid resistance
Voltage proof
Vibration
Thermal shock resistance
High temperature endurance
Mechanical endurance
Climatic
Fungus growth
Acceleration
Insert retention
Salt spray
Torque measurements for mating and unmating range from
1.130 Nm (10 lb in) to 4.29 Nm (38 lb in).
As per test in EL2112 and EL2113. Maximum 2.5m.Ω environmental
styles, 5mΩ hermetic styles.
Not less than 5000 megohms.
Less than 5 millivolts for aluminium shells, less than 10 millivolts if one
shell is ferrous. (At 1A).
Will withstand a load of 66.8 N (15 lbf) on a size 20 contact. 89.0 N (20
Ibf) on a size 16 contact. With a movement of less than .015".
At a pressure of 15 p.s.i. maximum leakage 1 c.c./hr. for fixed contact (low
profile) environmental styles and 0.01 micron/cub.ft./hr. hermetic styles.
Meets requirements of EL2112 after immersion in aircraft fuels,
turbine lubricants and hydraulic fluids.
700V peak applied for one minute at low air pressure 44mbar
(70,000 ft).
Unaffected by vibration tests detailed in BS 2G 100, Part 2, Grade A.
Unaffected by rapid temperature cycling between +205°C and -65°C.
Insulation resistance better than 200 megohms after 1,000 hours at
200oC.
500 matings and unmatings minimum.
No voltage breakdown after the climatic test detailed in BS 2G 100 Part 2
for Class 1 equipment.
Service unaffected by tests detailed in BS 2G 100 Part 2 for Class 1
connectors.
Performance unaffected after acceleration and crash landing test
detailed in BS 2G 100 Part 2 for Class 1A equipment.
Insert secure against rotation and also axial loads of 334N (75 lbf).
Service unaffected by spray test detailed in EL2112.
5
AMPHENOL LIMITED
Table of Shell Styles
PLUG
(Standard Coupling Ring)
Page 11
PLUG
(Ribbed Coupling Ring)
Page 11
GROUNDED PLUG
(Standard Coupling Ring)
Page 11
FLANGE MOUNTING
HERMETIC
RECEPTACLE Page 16
SINGLE HOLE MOUNTING
HERMETIC
RECEPTACLE Page 15
SOLDER MOUNTING
HERMETIC
RECEPTACLE Page 15
PAN 6432-1 F & 4F PAN 6432-1 T PAN 6432-1 U PAN 6432-1 E
6026 - 06E
6125 - 05 E
- 06EG
- 02H
6027H - 07H
6021H - 01H
FLANGE MOUNTING
RECEPTACLE Page 12
SINGLE HOLE
MOUNTING
RECEPTACLE Page 13
GROUNDED PLUG
(Ribbed Coupling Ring)
Page 11
DUMMY RECEPTACLE
Page 12 FLANGE MOUNTING
RECEPTACLE Page 11 SINGLE HOLE MOUNTING
RECEPTACLE Page 13
PAN 6432-IB & 4B
PAN 6432 -1A
& -4A PAN 6432-1 R -02A (219) -5002 (219)
6020 - 00E
6027 07E
- 05EG
- 188
- 02A
- 5002
Hermetic receptacles are available with pin tail terminations by adding deviation (345) to the Amphenol Part Number.
Polarisation Availability
For orientations not shown above consult factory
* Inserts and orientations in PAN 6432-1.
∆ Inserts and orientations in PAN 6432-4.
… These polarisations are not included in EL2112 Pattern 602
but are available as Amphenol proprietory part numbers.
6
AMPHENOL LIMITED
Insert Orientations
Normal position
with pin contacts Alternative position of insert
with socket contacts
(∅ counter clockwise)
Each diagram shows mating face of insert
Alternate position of insert
with pin contacts
( ∅ clockwise)
Orientation ∅∅ (degrees)
Insert
arrangement Normal W X Y Z
8-33 0 90 - - -
8-98 0 - - - -
10-6 0 90 - - -
12-3 0 - - 180 -
12-10 0 60 155 270 295
14-4 0 45 - - -
14-5 0 40 92 184 273
14-12 0 43 90 - -
14-15 0 17 110 155 234
14-19 0 30 165 315 -
16-8 0 54 152 180 331
16-26 0 60 - 275 338
18-8 0 - - - -
18-11 0 62 119 241 340
18-32 0 85 138 222 265
20-16 0 238 318 333 347
20-39 0 63 144 252 333
20-41 0 45 126 225 -
22-12 0 - - - -
22-21 0 16 135 175 349
22-41 0 39 135 264 -
22-55 0 30 142 226 314
24-19 0 30 165 315 -
24-31 0 90 225 255 -
24-61 0 90 180 270 324
7
AMPHENOL LIMITED
Key/Keyway Orientations
Datum is always taken from major key or keyway. In
receptacles the major keyway always remains fixed in
relation to the mounting flange. For the B,C,E and F
orientations, the three bayonet locations and associated
minor keyways are rotated complete, in accordance with
the table below.
N.B. - The accompanying diagram shows a
receptacle shell, with keyways. Corresponding key
orientations for a mating plug shell are therefore
always clockwise.
Shell
VALUES FOR αα (degrees)
VALUES FOR θθ (degrees) VALUES FOR ββ (degrees)
Size N B C E F N B C E F N B C E F
8 105
- - 118 82 35 - - 30 50 75 - - 100 75
10 105
85 125 115 85 35 35 35 30 50 75 75 75 100 75
12 105
89 121 115 85 35 35 35 30 50 75 75 75 100 75
14 105
91 119 75 120 35 35 35 30 50 75 75 75 100 75
16 105
93 117 75 120 35 35 35 30 50 75 75 75 100 75
18 105
95 115 75 120 35 35 35 30 50 75 75 75 100 75
20 105
95 115 75 120 35 35 35 30 50 75 75 75 100 75
22 105
97 113 75 120 35 35 35 30 50 75 75 75 100 75
24 105
97 113 75 120 35 35 35 30 50 75 75 75 100 75
VALUES FOR Ï•Ï• (degrees)
VALUES FOR ωω (degrees)
Shell
ORIENTATION ORIENTATION
Size N B C E F N B C E F
8 50 - - 30 45 60 - - 73 47
10 50 50 50 30 45 60 40 80 70 50
12 50 50 50 30 45 60 44 76 70 50
14 50 50 50 30 35 60 46 74 30 75
16 50 50 50 30 35 60 48 72 30 75
18 50 50 50 30 35 60 50 70 30 75
20 50 50 50 30 35 60 50 70 30 75
22 50 50 50 30 35 60 52 68 30 75
24 50 50 50 30 35 60 52 68 30 75
8
AMPHENOL LIMITED
Inset Availability
VOLTAGE RATING 1
RATING 1 RECOMMENDED TEST
ALTITUDE WORKING VOLTAGE
VOLTAGE
a.c. a.c.
r.m.s. r.m.s.
Sea Level 600 1,500
15,000 metres 375 500
21,000 metres 300 375
33,000 metres 175 200
VOLTAGE RATING 2
RATING 2 RECOMMENDED TEST
ALTITUDE WORKING VOLTAGE
VOLTAGE
a.c. a.c.
r.m.s. r.m.s.
Sea Level 1,000 2,300
15,000 metres 600 750
21,000 metres 450 550
33,000 metres 175 200
CURRENT RATING
The performance of 602 Series connectors at all limes exceeds the maximum continuous
bunched rating, of the appropriate temperature rating and size of wire or cable. This bunched
rating is therefore the determining factor. In the case of mixed loadings, the greatest individual
load shall be the bunched loading. In any combination of ambient temperature plus temperature
rise due to current flow through the contacts the maximum temperature of 200°C shall not be
exceeded.
… Contact characters are shown for identification purposes only. Every effort is
made to ensure accuracy but actual connectors should be inspected to ensure
actual position of characters. If in doubt consult nearest sales office.
Contact loading should not exceed:-
Size 20 Contacts 7.5A
Size 16 Contacts 15A
Size 12 Contacts 25A
9
AMPHENOL LIMITED
Ordering by Amphenol Part Numbers
All connectors containing size 12 contacts must have a Strain Relief Accessory fitted to maintain the stated
environmental performances. To ensure the best performance of the wire sealing grommet it is recommended that
this type of accessory should be fitted to all connectors. See page 17 for part numbers.
Connectors complete with contacts (including spares), seal plugs and tools, but less accessories, are ordered using part number with no
deviation added. This is identical to Patt. 602 Amphenol Condition 1. (See page 10.)
Ordering by Panavia Part Numbers
Connectors complete with contacts
(including spares), seal plugs and
tools but less accessories, which are
ordered separately - see page 17.
NOTE: Whether you order by the 602 Series, Panavia or the Pattern 602 number, all qualified connectors are supplied
marked with Pattern 602 part numbers. (See page 10).
10
AMPHENOL LIMITED
Ordering by Pattern 602 Numbers
All connectors containing size 12 contacts must have a Strain Relief Accessory fitted to maintain the stated environmental
performances. To ensure the best performance of the wire sealing grommet it is recommended that this type of accessory
should be fitted to all connectors. See page 17 for part numbers.
For latest part numbers qualified to Patt. 602 please consult your nearest Sales Office.
Connectors ordered against Patt. 602 numbers (as above) will be supplied in compliance with EL 2112 Patt. 602 requirements, this
is a basic connector with the exact complement of contacts which comply with EL2113.
This is identical to AMPHENOL Condition 8.
Amphenol Conditions and Deviations
Where connectors to Pattern 602 or 602GB number systems are required 'to be supplied' with accessories, or to other special
requirements, the appropriate Amphenol Condition for Pattern 602 or Deviation for 602GB, as shown below, should always be quoted.
e.g. 6020-18-32 PN Amphenol Cond 2 or 602GB-OOE 18-32P (309).
Amphenol Condition 1
Plugs and Sockets supplied against this condition will be supplied without cable accessories but complete with contacts (including spares), and
filler plugs.
Amphenol Condition 2 (Deviation 309)
Plugs and Sockets supplied against this condition will be supplied as Amphenol Condition 1 plus a cable accessory without strain relief to
MS3416.
Amphenol Condition 3 (Deviation 310)
Plugs and Sockets supplied against this condition will be supplied as Amphenol Condition 1 plus a straight backshell cable accessory with
Cable Tie strain relief to MS 31528.
Amphenol Condition 4 (Deviation 311)
Plugs and Sockets supplied against this condition will be supplied as Amphenol Condition 1 plus a 90° cable accessory with Cable Tie to
MS3154
Amphenol Condition 5 (Deviation 326)
Plugs and Sockets supplied against this condition will be supplied Amphenol Condition 1 but with adaptor for heat shrink boot to MS 3158.
Amphenol Condition 6 (Deviation 335)
Plugs and Sockets supplied against this condition will be supplied as Amphenol Condition 1 plus a straight cable accessory with saddle clamp
to MS 3417
Amphenol Condition 7 (Deviation 336)
Plugs and Sockets supplied against this condition will be supplied as Amphenol Condition 1 plus a 90° cable accessory with saddle clamp to
MS 3418.
Amphenol Condition 8 (Deviation 341)
Plugs and Sockets supplied against basic 6020, 6026, 6027 reference numbers will be supplied with the exact complement of contacts but
without seal plugs, tools and accessories.
Amphenol Condition 9 (Deviation 301)
Plugs and Sockets supplied against this condition will be without contacts, seal plugs, tools and accessories.
Deviation (219) Receptacles only, film wire terminations.
Deviation (345) Hermetic receptacles only, pintail terminations.
11
AMPHENOL LIMITED
Ribbed Coupling Ring Plug
- 05E
6125
(To RRE
|P|50753)
Grounded Plug 05EG
Shell
Size
C1
Max.
Dia.
C2
max.
Dia.
G
±± 0.76
(±± .030)
H
max. L
Thd
UNEF 2A
19.86 22.66 4.06 31.24
8 (0.782) (0.892) (0.160) (1.230) ½ - 20
23.52 25.83 4.06 31.24
10 (0.926) (1.017) (0.160) (1.230) 5/8 - 24
26.49 29.01 4.06 31.24
12 (1.043) (1.142) (0.160) (1.230) ¾ - 20
30.05 32.18 4.06 31.24
14 (1.183) (1.267) (0.160) (1.230) 7/8 - 20
33.15 36.93 4.06 31.24
16 (1.305) (1.454) (0.160) 0.230) 1 - 20
35.33 39.70 4.06 31.24
18 (1.391) (1.563) (0.160) (1.230) 11/16 - 18
38.89 42.85 4.06 31.24
20 (1.531) (1.687) (0.160) (1.230) 13/16 - 18
42.06 45.64 4.06 31.24
22 (1.656) (1.797) (0.160) (1.230) 15/16 - 18
45.14 48.82 4.06 31.24
24 (1.777) (1.922) (0.160) (1.230) 17/16 - 18
Standard Plug
-06E
6026
PAN 6432 - 1F
PAN 6432 - 4F
Grounded Plug 06EG
Flange Mtg. Receptacle
-02A Sealed ( Low Profile) with Solder bucket terminations
- 02A (219) Sealed ( Low Profile) with pintail terminations.
D dia. M N X sq.
Shell B C ± 0.05
E G1 G2 Dia. Dia. P ± 0.13
Size Max. Sq max
(±0.002)
Max. Max. Max. Max. Max. Max (± .005)
11.71 21.03 3.18 1.96 12.22 10.62 12.04 12.42 2.21 15.09
08 (0.461) (0.828) (0.125) (0.077) (0.481) (0.418) (0.474) (0.489) (0.087)
(0.594)
11.71 24.23 3.18 1.96 12.22 10.62 15.01 15.60 2.21 18.26
10 (0.461) (0.954) (0.125) (0.077) (0.481) (0.418) (0.591) (0.614) (0.087)
(0.719)
11.71 25.59 3.18 1.96 12.22 10.62 19.08 18.77 2.21 20.82
12 (0.461) (1.047) (0.125) (0.077) (0.481) (0.418) (0.751) (0.739) (0.087)
(0.812)
11.71 28.98 3.18 1.96 12.22 10.62 22.25 21.95 2.21 23.01
14 (0.461) (1.141) (0.125) (0.077) (0.481) (0.418) (0.876) (0.864) (0.087)
(0.906)
11.71 31.34 3.18 1.96 12.22 10.62 25.43 25.12 2.21 24.61
16 (0.461) (1.234) (0.125) (0.077) (0.481) (0.418) (1.001) (0.989) (0.087)
(0.969)
11.71 33.73 3.18 1.96 12.22 10.62 28.60 26.67 2.21 28.97
18 (0.461) (1.328) (0.125) (0.077) (0.481) (0.418) (1.126) (1.050) (0.087)
(1.062)
14.38 36.91 3.18 2.08 9.60 9.58 31.78 29.85 5.38 29.36
20 (0.566) (1.453) (0.125) (0.082) (0.378) (0.377) (1.251) (1.175) (0.212)
(1.156)
14.38 40.08 3.18 2.08 9.60 9.58 34.95 33.02 5.38 31.75
22 (0.566) (1.578) (0.125) (0.082) (0.378) (0.377) (1.376) (1.300) (0.212)
(1.250)
15.11 43.26 3.86 2.08 10.31 8.71 38.13 36.20 5.38 34.92
24 (0.595) (1.703) (0.152) (0.082) (0.406) (0.343) (1.501) (1.425) (0.212)
(1.375)
NOTE:- For panel piercing dimensions see type -00E (page 12).
Dimensions: mm - bold type: inches - light type in brackets throughout unless otherwise stated
* for other Pintail lengths consult factory.
12
AMPHENOL LIMITED
Flange Mtg. Receptacle - 00E
6020
PAN 6432-1B
PAN 6432-4B
Dummy
Receptacle - 188
PAN 6432-IR
Ordering Details 602GB-188-XX or PAN 6432-1 R-XX replace XX
by shell size required e.g. 602GB-188-18 or PAN 6432-1R-18.
Shell M1 M2 Panel Thickness W dia. X sq
Size Dia. Dia. P1 P2 P3 V ±± 0.13 ±± 0.13
Max. max. max. max. max. min. ( ± .005) (± .005)
12.04 12.67 3.18 2.21 3.18 23.62 14.43 15.09
8
(0.474)
(0.499)
(0.125)
(0.087)
(0.125)
(0.930)
(0.568)
(0.594)
15.01 15.88 3.18 2.21 3.18 26.80 17.40 18.26
10
(0.591)
(0.625)
(0.125)
(0.087)
(0.125)
(1.055)
(0.685)
(0.719)
19.08 19.05 3.18 2.21 3.18 29.98 21.95 20.62
12
(0.751)
(0.750)
(0.125)
(0.087)
(0.125)
(1.180)
(0.864)
(0.812)
22.25 22.22 3.18 2.21 3.18 33.15 25.12 23.01
14
(0.876)
(0.875)
(0.125)
(0.087)
(0.125)
(1.305)
(0.989)
(0.906)
25.43 25.40 3.18 2.21 3.18 37.85 28.27 24.61
16
(1.001)
(1.000)
(0.125)
(0.087)
(0.125)
(1.490)
(1.113)
(0.969)
28.60 26.97 3.18 2.21 3.18 40.64 31.45 26.97
18
(1.126)
(1.062)
(0.125)
(0.087)
(0.125)
(1.600)
(1.238)
(1.062)
31.78 30.15 3.18 5.38 5.38 43.81 34.62 29.36
20
(1.251)
(1.187)
(0.125)
(0.212)
(0.212)
(1.725)
(1.363)
(1.156)
34.95 33.32 3.18 5.38 5.38 46.61 37.80 31.75
22
(1.376)
(1.312)
(0.125)
(0.212)
(0.212)
(1.835)
(1.488)
(1.250)
38.13 36.50 3.18 5.38 5.38 49.78 41.02 34.92
24
(1.501)
(1.437)
(0.125)
(0.212)
(0.212)
(1.960)
(1.615)
(1.375)
Shell
Size B1
±± 0.38
(± .015)
B2
±± 0.25
(± .010)
C
Sq
max.
D1 dia.
±± 0.05
(± .002)
D2 dia.
+ 0.13
(+ .005)
E
±± 0.41
(± .016)
F
max. G
±± 0.76
(± .030)
L Thd
UNEF 2A
11.33 12.12 21.03 3.18 3.25 1.57 30.86 4.06
8
(0.446)
(0.477)
(0.828)
(0.125)
(0.128)
(0.062)
(1.215)
(0.160)
½ -20
11.33 12.12 24.23 3.18 3.25 1.57 30.86 4.06
10
(0.446)
(0.477)
(0.954)
(0.125)
(0.128)
(0.062)
(1.215)
(0.160)
5/8 – 24
11.33 12.12 26.59 3.18 3.25 1.57 30.86 4.06
12
(0.446)
(0.477)
(1.047)
(0.125)
(0.128)
(0.062)
(1.215)
(0.160)
¾ - 20
11.33 12.12 28.98 3.18 3.25 1.57 30.86 4.06
14
(0.446)
(0.477)
(1.141)
(0.125)
(0.128)
(0.062)
(1.215)
(0.160)
7/8 – 20
11.33 12.12 31.34 3.18 3.25 1.57 30.86 4.06
16
(0.446)
(0.477)
(1 .234)
(0.125)
(0.128)
(0.062)
(1.215)
(0.160)
1 – 20
11.33 12.12 33.73 3.18 3.25 1.57 30.86 4.06
18
(0.446)
(0.477)
(1.328)
(0.125)
(0.128)
(0.062)
(1.215)
(0.160)
1 1/16 –18
14.50 14.50 36.91 3.18 3.25 2.39 32.38 4.06
20
(0.571)
(0.571)
(1.453)
(0.125)
(0.128)
(0.094)
(1.275)
(0.160)
1 3/16 – 18
14.50 14.50 40.08 3.18 3.25 2.39 32.38 4.06
22
(0.571 )
(0.571)
(1.578)
(0.125)
(0.128)
(0.094)
(1.275)
(0.160)
1 5/16 – 18
15.37 15.37 43.26 3.86 3.94 2.39 32.38 4.06
24
(0.605)
(0.605)
(1.703)
(0.152)
(0.155)
(0.094)
(1.275)
(0.160)
1 7/16 - 18
13
AMPHENOL LIMITED
Single Hole Mtg .Receptacle
-07E
6027
PAN 6432-1A
PAN 6432-4A
P Panel
Shell B C Dia. D G M Max thickness ±± 0.13
Size Max. Max Max. Mex. dia. Max. min. (±.005)
17.70 23.27 22.15 7.47 12.04 4.75 1.57 13.34
8 (0.697) (0.916) (0.872) (0.294) (0.474) (0.187) (0.062) (0.525)
17.70 26.44 25.81 7.47 15.01 4.75 1.57 16.51
10 (0.697) (1.041) (1.016) (0.294) (0.591) (0.187) (0.062) (0.650)
17.70 31.19 31.29 7.47 19.08 4.75 1.57 20.66
12 (0.697) (1.228) (1.232) (0.294) (0.751) (0.187) (0.062) (0.813)
17.70 34.37 34.98 7.47 22.25 4.75 1.57 23.80
14 (0.697) (1.353) (1.377) (0.294) (0.876) (0.187) (0.062) (0.937)
17.70 37.54 38.63 7.47 25.43 4.75 1.57 26.95
16 (0.697) (1.478) (1.521) (0.294) (1.001) (0.187) (0.062) (1.061)
17.70 40.72 42.32 7.47 28.60 4.75 1.57 30.12
18 (0.697) (1.603) (1.666) (0.294) (1.126) (0.187) (0.062) (1.186)
19.25 45.49 46.97 8.20 31.78 6.36 1.57 33.30
20 (0.758) (1.791) (1.810) (0.323) (1.251) (0.250) (0.062) (1.311)
19.25 48.67 49.63 8.20 34.95 6.36 1.57 36.47
22 (0.758) (1.916) (0.954) (0.323) (1.376) (0.250) (0.062) (1.436)
19.25 51.84 53.31 8.20 38.13 5.58 1.57 39.65
24 (0.758) (2.041) (2.099) (0.323) (1.501) (0.219) (0.062) (1.561)
NOTE:- For panel piercing dimensions see style -07E.
*Order by part numbers 602GB-5002-XX-XXXX or 602GB-5002-XX-
XXXX (219). Replace XX-XXXX by insert arrangement, contact style
and orientation require.
*For other Pintail lengths consult factory.
Shell
B D E F G K A/F L Thd M P Panel V W dia. Z1±±0.13 Z2 ±±0.13
Size max. Sq. max. max. ±± 0.76
(± .030) max. UNEF 2A Max.
dia. thickness
max. min. min. ±± 0.13
(± .005) (± .005)
(± .005)
17.96 24.23 2.87 30.86 4.06 19.48 12.04 4.75 1.57 25.15 14.53 13.34 13.61
8 (0.707) (0.954) (0.113) (1.215) (0.160) (0.767) ½ - 20 (0.474) (0.187)
(0.062)
(0.990) (0.572) (0.525) (0.536)
17.96 27.38 2.87 30.86 4.06 22.66 15.01 4.75 1.57 28.32 17.70 16.51 16.79
10 (0.707) (1.078) (0.113) (1.215) (0.160) (0.892) 5/8 – 24 (0.591) (0.187)
(0.067)
(1.115) (0.697) (0.650) (0.661)
17.96 32.16 2.87 30.86 4.06 27.41 19.08 4.75 1.57 33.15 22.73 20.65 20.93
12 (0.707) (1.266) (0.113) (1.215) (0.160) (1.079) ¾ - 20 (0.751) (0.187)
(0.062)
(1.305) (0.895) (0.813) (0.824)
17.96 35.33 2.87 30.86 4.06 30.61 22.25 4.75 1.57 36.32 25.65 23.80 24.08
14 (0.707) (1.391) (0.113) (1.215) (0.160) (1.205) 7/8 – 20 (0.876) (0.187)
(0.062)
(1.430) (1.010) (0.937) (0.948)
17.96 38.51 2.87 30.88 4.06 33.76 25.43 4.75 1.57 39.88 28.83 26.95 27.23
16 (0.707) (1.516) (0.113) (1.215) (0.160) (1.329) 1 – 20 (1.001) (0.187)
(0.062)
(1.570) (1.135) (1.061) (1.072)
17.96 41.88 2.87 30.86 4.06 36.96 28.60 4.75 1.57 43.69 32.00 30.12 30.40
18 (0.707) (1.641) (0.113) (1.215) (0.160) (1.455) 1 1/16 – 18 (1.126) (0.187)
(0.062)
(1.720) (1.260) (1.186) (1.197)
19.61 48.43 3.76 32.38 4.06 40.11 31.78 6.35 1.57 47.37 33.18 33.30 33.58
20 (0.772) (1.828) (0.148) (1.275) (0.160) (1.579) 1 3/16 – 18 (1.251) (0.250)
(0.062)
(1.865) (1.385) (1.311) (1.322)
19.61 49.63 3.76 32.38 4.06 43.31 34.95 6.35 1.57 50.93 38.35 36.47 36.75
22 (0.772) (1.954) (0.148) (1.275) (0.160) (1.705) 1 5/16 – 18 (1.376) (0.250)
(0.062)
(2.005) (1.510) (1.436) (1.447)
19.61 52.78 3.78 32.38 4.06 46.48 38.13 5.56 1.57 54.61 41.53 39.65 39.93
24 (0.772) (2.078) (0.148) (1.275) (0.160) (1.829) 1 7/16 – 18 (1.501) (0.219)
(0.062)
(2.150) (1.635) (1.561) (1.572)
Single Hole Mtg .Receptacle
-002 Sealed (Low Profile) with Solder Bucket Terminations *
-5002 (219) Sealed (Low Profile) with Pintail Terminations *
14
AMPHENOL LIMITED
Caps & Chains
62GB Series caps and chains are common to 602GB and 62GB Series
To fit
Plugs
Amphenol Part No. Panavia No.
602GB-149-08-24 PAN 6432-1 MF-08 to 24
not suitable for
use with 62GB
series.
To fit
Plugs Amphenol Part No.
6026 B-134-08 to 24
To fit
Single hole fixing
receptacles
Amphenol Part No.
62GB-997-08 to 24
To fit Amphenol Part No. Panavia No.
Single hole fixing receptacles 62GB-736-08 to 24 PAN 6432-1 MA-08 to 24
Flange mounting receptacles 62GB-738-08 to 24 PAN 6432-1 MB-08 to 24
NOTE: For caps and cords refer to our 62GB catalogue
(max temperature 125° C)
Shell
Size A1
max. A2
max.
C1
Dia.
max.
C2
Dia.
max.
C3
Dia.
Max.
d1
+0.5
-0.13
(+.010)
(-.005)
d2
+0.25
(+ .010)
F
approx.
16.76 16.64 18.26 18.64 22.65 3.18 14.68 76.00
8 (0.660) (0.655) (0.719) (0.734) (0.892) (0.125) (0.578) (3.000)
16.76 16.64 21.44 21.82 25.83 3.18 17.86 76.00
10 (0.660) (0.655) (0.844) (0.859) (1.017) (0.125) (0.703) (3.000)
16.76 16.64 25.40 25.40 29.00 3.18 22.63 89.00
12 (0.660) (0.655) (1.000) (1.000) (1.142) (0.125) (0.891) (3.500)
16.76 16.64 28.57 28.57 32.18 3.18 25.81 89.00
14 (0 660) (0 655) (1.125) (1.125) (1.267) (0.125) (1.016) (3.500)
16.76 16.64 31.75 31.75 36.93 3.18 28.98 89.00
16 (0.660) (0.655) (1.250) (1.250) (1.454) (0.125) (1.141) (3.500)
16.76 16.64 34.92 34.92 39.70 3.18 32.16 89.00
18 (0 660) (0.655) (1.375) (1.375) (1.563) (0.125) (1.266) (3.500)
18.29 16.64 38.10 38.10 42.84 3.18 35.33 102.00
20 (0.720) (0.655) (1.500) (1.500) (1.687) (0.125) (1 391) (4.000)
18.29 16.64 41.27 41.27 45.64 3.18 38.50 102.00
22 (0.720) (0.655) (1.625) (0.625) (1.797) (0.125) (1.516) (4.000)
19.18 17.53 44.45 44.45 48.81 3.73 41.68 102.00
24 (0.755) (0.690) (1.750) (1.750) (1.922) (0.147) (1.641) (4.000)
15
AMPHENOL LIMITED
Single Hole Mtg. Hermetic Seal Receptacle
-07H
6027H
PAN 6432 -1U
Solder Mtg. Hermetic Seal Receptacle
- 01H
6021 H
PAN 6432-1E
Shell A B D sq. G max. K L Thd
Size max max max contact contact
Size 20 Size 16 A/F
max. UNEF 2A
20.83 17.96 24.23 3.40 5.18 19.48
8 (0.820) (0.707) (0.954) (0.134) (0.204) (0.767) 9/16 – 24
20.83 17.96 27.38 3.40 5.18 22.66
10 (0.820) (0.707) (1.078) (0.134) (0.204) (0.892) 11/16 – 24
20.83 17.96 32.16 3.40 5.18 27.41
12 (0.820) (0.707) (1.266) (0.134) (0.204) (1.079) 7/8 – 20
20.83 17.96 35.33 3.40 5.18 30.61
14 (0.820) (0.707) (1.391) (0.134) (0.204) (1.205) 1 – 20
20.83 17.96 38.51 3.40 5.18 33.76
16 (0.820) (0.707) (1.516) (0.134) (0.204) (1.329) 1 1/8 –18
20.83 17.96 41.68 3.40 5.18 36.96
18 (0.820) (0.707) (1.641) (0.134) (0.204) (1.455) 1 ¼ - 18
23.37 19.61 46.43 2.51 4.29 40.11
20 (0.920) (0.772) (1.828) (0.099) (0.169) (1.579) 1 3/8 - 18
23.37 19.61 49.63 2.51 4.29 43.31
22 (0.920) (0.772) (1.954) (0.099) (0.169) (1.705) 1 ½ - 18
24.16 20.40 52.78 2.51 4.29 46.46
24 (0.951) (0.803) (2.078) (0.099) (0.169) (1.829) 1 5/8 - 18
Shell M P Panel V W Z Z1
Size Dia. thickness min. ±±0.13 ±±0.13 ±±0.13
max. max. min. (±.005) (±.005) (±.005)
12.04 4.75 1.57 25.15 14.53 13.34 13.61
8 (0.474) (0.187) (0.062) (0.990) (0.572) (0.525) (0.536)
15.01 4.75 1.57 28.32 17.70 16.51 16.79
10 (0.591) (0.187) (0.062) (1.115) (0.697) (0.650) (0.661)
19.08 4.75 1.57 33.15 22.73 20.65 20.93
12 (0.751) (0.187) (0.062) (1.305) (0.895) (0.813) (0.824)
22.25 4.75 1.57 36.32 25.65 23.80 24.08
14 (0.876) (0.187) (0.062) (1.430) (1.010) (0.937) (0.948)
25.43 4.75 1.57 39.88 28.83 26.95 27.23
16 (1.001) (0.187) (0.062) (1.570) (1.135) (1.061) (1 072)
28.60 4.75 1.57 43.69 32.00 30.12 30.40
18 (1.126) (0.187) (0.062) (1.720) (1.260) (1.186) (1.197)
31.78 6.35 1.57 47.37 35.18 33.30 33.58
20 (1.251) (0.250) (0.062) (1.865) (1.385) (1.311) (1.322)
34.95 6.35 1.57 50.93 38.35 36.47 36.75
22 (1.376) (0.250) (0.062) (2.005) (1.510) (1.436) (1.447)
38.13 6.35 1.57 54.61 41.53 39.65 39.93
24 (1.501) (0.250) (0.062) (2.150) (1.635) (1.561) (1.572)
For pin tail termination contacts in hermetic connectors add deviation (345) to the Amphenol Part Number.
Shell A C G max. H M N V W Dia.
Size max. max. contact contact max. max. max. min. ±±0.13
Dia. Size 20 Size 16 Dia. Dia. (±.005)
20.35 16.13 4.52 6.30 3.96 12.04 14.30 23.62 14.48
8 (0.801) (0.635) (0.178) (0.248) (0.156) (0.474) (0.563) (0.930) (0.570)
20.35 19.30 4.52 6.30 3.96 15.01 17.09 26.80 17.27
10 (0.801) (0.760) (0.178) (0.248) (0.156) (0.591) (0.673) (1.055) (0.680)
20.35 21.69 4.52 6.30 3.96 19.08 19.86 29.98 20.04
12 (0.801) (0.854) (0.178) (0.248) (0.156) (0.751) (0.782) (1.180) (0.789)
20.35 24.87 4.52 8.30 3.96 22.25 23.04 33.15 23.22
14 (0.801) (0.979) (0.178) (0.248) (0.156) (0.876) (0.907) (1.305) (0.914)
20.35 28.04 4.52 6.30 3.96 25.43 26.21 37.85 26.39
16 (0.801) (1.104) (0.178) (0.248) (0.156) (1.001) (1.032) (1.490) (1.039)
20.35 31.19 4.52 6.30 3.96 28.60 29.39 40.64 29.57
18 (0.801) (1.228) (0.178) (0.248) (0.156) (1.126) (1.157) (1.600) (1.164)
21.92 33.58 4.52 6.30 3.96 31.78 31.78 43.81 31.95
20 (0.863) (1.322) (0.178) (0.248) (0.156) (1.251) (1.251) (1.725) (1.258)
22.73 36.78 3.71 5.49 4.79 34.95 34.95 46.61 35.13
22 (0.895) (1.448) (0.146) (0.216) (0.188) (1.376) (1.376) (1.835) (1.383)
22.73 39.98 3.71 5.49 4.78 38.13 38.13 49.78 38 30
24 (0.895) (1.574) (0.146) (0.216) (0.188) (1.501) (1.501) (1.960) (1.508)
16
AMPHENOL LIMITED
Flange Mtg. Hermetic Seal Receptacle - 02H
PAN 6432 - 1T
G max.
contact contact
Shell
Size A
max. B
±±0.25
(±.010)
C
Sq.
max.
d1 Dia.
±±0.05
(±.002)
d2
±±0.13
(±.005)
E
±±0.41
(±.016) Size 20 Size 16
20.35 14.94 21.03 3.05 3.25 1.57 4.52 6.30
8
(0.801)
(0.588)
(0.828)
(0.120)
(0.128)
(0.062)
(0.178)
(0.248)
20.35 14.94 24.23 3.05 3.25 1.57 4.52 6.30
10
(0.801)
(0.588)
(0.954)
(0.120)
(0.128)
(0.062)
(0.178)
(0.248)
20.35 14.94 26.59 3.05 3.25 1.57 4.52 6.30
12
(0.801)
(0.588)
(1.047)
(1.120)
(0.128)
(0.062)
(0.178)
(0.248)
20.35 14.94 28.98 3.05 3.25 1.57 4.52 6.30
14
(0.801)
(0.588)
(1.141)
(0.120)
(0.128)
(0.062)
(0.178)
(0.248)
20.35 14.94 31.34 3.05 3.25 1.57 4.52 6.30
16
(0.801)
(0.588)
(1.234)
(0.120)
(0.128)
(0.062)
(0.178)
(0.248)
20.35 14.94 33.73 3.05 3.25 1.57 4.57 6.30
18
(0.801)
(0.588)
(1.328)
(0.120)
(0.128)
(0.062)
(0.178)
(0.248)
21.92 16.51 36.91 3.05 3.25 2.39 4.52 6.30
20
(0.863)
(0.650)
(1.453)
(0.120)
(0.128)
(0.094)
(0.178)
(0.248)
27.73 16.51 40.08 3.05 3.25 2.39 3.71 5.49
27
(0.895)
(0.650)
(1.578)
(0.120)
(0.128)
(0 094)
(0.146)
(0.216)
22.73 16.51 13.26 3.73 3.94 2.39 3.71 5.49
24
(0.805)
(0.650)
(1.703)
(0.147)
(0.155)
(0.094)
(0.146)
(0.216)
Shell H M N P max. V W dia. X sq.
Size max. Dia. Dia. Panel min +0.13 +0.13
max max Thickness
(+.005) (+.005)
3.18 12.04 14.30 2.21 23.62 14.43 15.09
8
(0.125)
(0.474)
(0.563)
(0.087)
(0.930)
(0.568)
(0.594)
3.18 15.01 17.09 2.21 26.80 17.40 18.26
10
(0.125)
(0.591)
(0.673)
(0.087)
(1.055)
(0.685)
(0.719)
3.18 19.08 19.86 2.21 29.98 21.95 20.62
17
(0.125)
(0.751)
(0.782)
(0.087)
(1.180)
(0.864)
(0.812)
3.18 22.25 23.04 2.21 33.15 25.12 23.01
14
(0.125)
(0.876)
(0.907)
(0.087)
(1.305)
(0.989)
(0.906)
3.18 25.43 26.21 2.21 37.85 28.27 24.61
16
(0.125)
(1.001)
(1.032)
(0.087)
(1.490)
(1.113)
(0.969)
3.18 28.60 29.39 2.21 40.64 31.45 26.97
18
(0.125)
(1.126)
(1.157)
(0.087)
(1.600)
(1.238)
(1.062)
2.36 31.78 31.78 5.38 43.81 34.62 29.36
20
(0.093)
(1.251)
(1.251)
(0.212)
(1.725)
(1.363)
(1.156)
3.18 34.95 34.95 5.38 46.61 37.80 31.75
22
(0.125)
(1.376)
(1.376)
(0.212)
(1.835)
(1.488)
(1.250)
3.18 38.13 38.13 5.38 49.78 41.07 34.92
24
(0.125)
(1.501)
(1.501)
(0.212)
(1.960)
(1.615)
(1.375)
For pin tail termination contacts in hermetic connectors add deviation (345) to the Amphenol Part Number.
17
AMPHENOL LIMITED
Cable Accessories
To ensure the best performance of the connector wire sealing grommet it is recommended that a Strain Relief
Accessory should be fitted. See ordering information on pages 9 & 10.
With Straight Strain Relief Saddle Clamp.
For ordering as a separate item 602GB-198-XX replace
XX by shell size required
e.g. 602GB-198-18.
With 90° Strain Relief Saddle Clamp.
For ordering as a separate item
602GB-199-XX replace XX by shell size
required e.g. 602GB-199-18
With Straight Strain Relief Clamp.
For ordering as a separate item
602GB-129-XX or PAN 6432-1 D-XX
replace XX by shell size required
e.g. 602GB-129-08
or PAN 6432-1 D-08.
With 90
o
Strain Relief Clamp.
For ordering as a separate item
602GB-133-XX or PAN 6432-1 K-XX
replace XX by shell size required
e.g. 602GB-133-08
or PAN 6432-1 K-OE.
Spacer pad for Cable
tie type strain relief
clamps 602GB-141
Grommet nut assembly for
heat shrink boot
602GB-140-XX replace XX by
shell size required
e.g. 602GB-140-08.
Grommet nut Without Strain Relief
For ordering as a separate item
602GB-127-XX or PAN 6432-1 C-XX
replace XX by shell size required.
e.g. 602GB-127-08
or PAN 6432-1 C-08.
RFI Adaptor for heat shrink
boot 602GB-285-XX for use
with 06EG and 05EG plugs.
Note: As part no. depends
on cable being used please
consult factory for details.
Note: For cable accessory dimensions see tables on following page.
18
AMPHENOL LIMITED
Cable Accessories
RESILIENT BUSH
These bushes are for use with saddle clamp type strain
relief clamps but are not included with these accessories
and if required must be ordered separately.
602GB-205-XX or PAN 6432-1 H-XX replace XX by
shell size required.
e.g. 602GB-205-18 or PAN 6432 -1 H-18.
Shell
F1 max. when F2 max. when F3 max. when F4 max. when F5 max. when F6 max. when M
Size fitted to fitted to fitted to fitted to fitted to fitted to dia
Plug Recept.
Plug Recept.
Plug Recept.
Plug Recept.
Plug Recept. Plug Recept.
max.
48.67 48.29 52.45 52.07 43.56 43.18 54.79 54.33 38.28 37.90 53.24 52.76 15.67
8
(1.916)
(1.901)
(2.065)
(2.050)
(1.715)
(1.700)
(2.157)
(2.139)
(1.507)
(1.492)
(2.092)
(2.077)
(0.617)
51.46 51.08 54.53 54.15 43.56 43.18 54.79 54.33 38.28 37.90 53.24 52.76 18.64
10
(2.026)
(2.011)
(2.147)
(2.132)
(1.175)
(1.700)
(2.157)
(2.139)
(1.507)
(1.492)
(2.092)
(2.077)
(0.734)
54.64 54.25 59.44 59.05 43.56 43.18 56.31 55.85 38.28 37.90 54.24 52.76 21.79
12
(2.151)
(2.136)
(2.340)
(2.325)
(1.175)
(1.700)
(2.217)
(2.199)
(1.507)
(1.492)
(2.092)
(2.077)
(0.858)
54.64 54.25 60.96 60.58 43.56 43.18 60.63 60.17 38.28 37.90 54.24 52.76 24.99
14
(2.151)
(2.136)
(2.400)
(2.385)
(1.175)
(1.700)
(2.387)
(2.369)
(1.507)
(1.492)
(2.092)
(2.077)
(0.984)
57.81 57.43 64.74 64.36 43.56 43.18 60.63 60.17 38.28 37.90 54.24 52.76 28.24
16
(2.270)
(2.261)
(2.549)
(2.534)
(1.175)
(1.700)
(2.387)
(2.369)
(1.507)
(1.492)
(2.092)
(2.077)
(1.112)
64.16 63.78 67.59 67.21 44.20 43.18 62.66 62.20 38.28 37.90 54.24 52.76 30.94
18
(2.526)
(2.511)
(2.661)
(2.646)
(1.740)
(1.700)
(2.467)
(2.449)
(1.507)
(1.492)
(2.092)
(2.077)
(1.218)
67.34 68.48 70.76 71.91 44.20 45.34 65.96 67.03 38.28 39.42 54.24 52.76 34.16
20
(2.651)
(2.696)
(2.786)
(2.831)
(1.740)
(1.785)
(2.597)
(2.639)
(1.507)
(1.552)
(2.092)
(2.077)
(1.345)
70.51 71.65 73.94 75.08 44.20 45.34 69.01 70.08 38.28 39.42 54.24 52.76 37.29
22
(2.776)
(2.821)
(2.911)
(2.956)
(1.740)
(1.785)
(2.717)
(2.759)
(1.071)
(1.552)
(2.092)
(2.077)
(1.468)
73.69 74.83 77.11 78.26 44.20 45.34 72.31 73.38 38.28 39.42 54.24 52.76 40.46
24
(2.901)
(2.946)
(3.036)
(3.081)
(1.740)
(1.785)
(2.847)
(2.889)
(1.507)
(1.552)
(2.092)
(2.077)
(1.593)
Shell N1 N2 N3 N4 N5 N6 S1 S2 T1 T2 T3 U
Size max. max. max. max. max. Max. Cable Entry dia. max. dia. dia. max.
Open Closed
max. max. max.
24.18 27.97 19.08 30.23 13.72 28.58 5.18 3.18 6.60 19.10 16.69 15.67 30.99
8
(0.952)
(1.101)
(0.751)
(1.190)
(0.540)
(1.125)
(0.204)
(0.125)
(0.260)
(0.752)
(0.657)
(0.617)
(1.220)
26.97 30.05 19.08 30.23 13.72 28.58 7.26 4.75 9.27 21.13 19.86 18.64 30.99
10
(1.062)
(1.183)
(0.751)
(1.190)
(0.540)
(1.125)
(0.286)
(0.187)
(0.365)
(0.832)
(0.782)
(0.734)
(1.220)
30.15 34.95 19.08 31.75 13.72 28.58 10.57 7.39 12.73 25.10 23.80 21.79 41.15
12
(1.187)
(1.376)
(0.751)
(1.250)
(0.540)
(1.125)
(0.416)
(0.291)
(0.501)
(0.988)
(0.937)
(0.858)
(1.620)
30.15 36.47 19.08 36.07 13.72 28.58 12.09 8.92 14.60 26.57 26.67 24.99 42.16
14
(1.187)
(1.436)
(0.751)
(1.420)
(0.540)
(1.125)
(0.476)
(0.351)
(0.575)
(1.046)
(1.050)
(0.984)
(1.660)
33.32 40.26 19.08 36.07 13.72 28.58 15.88 12.73 17.78 33.50 31.47 28.24 43.69
16
(1.312)
(1.585)
(0.751)
(1.420)
(0.540)
(1.125)
(0.625)
(0. 501)
(0.700)
(1.319)
(1.239)
(1 .112)
(1.720)
39.67 43.10 19.71 38.10 13.72 28.58 17.93 13.16 19.79 36.86 35.00 30.94 43.69
18
(1.562)
(1.697)
(0.776)
(1.500)
(0.540)
(1.125)
(0.706)
(0.518)
(0.779)
(1.451)
(1.378)
(1.218)
(1.720)
42.85 46.28 19.71 41.40 13.72 28.58 21.11 14.76 22.96 39.55 38.10 34.16 45.47
20
(1.687)
(1.822)
(0.776)
(1.630)
(0.540)
(1.125)
(0.831)
(0.581)
(0.904)
(1.557)
(1.500)
(1.345)
(1.790)
46.02 49.45 19.71 44.45 13.72 28.58 24.28 16.36 26.14 41.99 41.43 37.29 46.99
22
(1.812)
(1.947)
(0.776)
(1.750)
(0.540)
(1.125)
(0.956)
(0.644)
(1.029)
(1.653)
(1.631)
(1.468)
(1.850)
49.20 52.83 19.71 47.75 13.72 28.58 27.46 17.93 29.06 45.08 44.45 40.46 48.51
24
(1.937)
(2.072)
(0.776)
(1.880)
(0.540)
(1.125)
(1.081)
(0.706)
(1.144)
(1.775)
(1.750)
(1.593)
(1.910)
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Amphenol:
602GB07E1832PB 602GB05EG2241SC 602GB50022255PB219 602GB06EG2255SW 602GB05EG1808PE
602GB02A1210SF 602GB50022461SE 602GB50022255SC219 602GB50022016SW 602GB50022255SW
602GB50022255PW219 602GB50022255PZ 602GB50022255PF 602GB06EG1832SB 602GB02A1210PZ219
602GB50022255SN 602GB00E2039PZ 602GB50022255PN 602GB12720 602GB00E1006PC
602GB50022255SX219 602GB13312 602GB50022255SC 602GB50022255PC219 602GB50022255SZ219
602GB07E2431SF 602GB50022255SX 602GB50022016PW 602GB50022461SN219 602GB06EG1006SF
602GB50022255SY219 602GB07E1608SX 602GB50022255SN219 602GB50022255PE219 602GB50022255SE219
602GB50022255PX219 602GB07E2221SX 602GB07E1419PF 602GB50022419PE 602GB07E1006SB
602GB02A1419SC219 602GB07E2039PZ 602GB50022255SB 602GB06EG1210PC 602GB07E2431PW
602GB02A1405PZ219 602GB07E1832SW 602GB50022255SY 602GB50022255PW 602GB06EG2039PY
602GB07E1405SE 602GB50022255PE 602GB02A2461SB 602GB00E2419SW 602GB05EG1832SY
602GB50021415SY219 602GB07E1404PC 602GB06E1626PC 602GB50022255SF 602GB05EG2255SE
602GB50022255SZ 602GB12714 602GB50022255PX 602GB50022255PC 602GB06EG2016PZ
602GB50022255PY219 602GB05EG1412PW 602GB50022255PN219 602GB50022255SB219
602GB50022255PF219 602GB06EG2461SN 602GB50022241PF 602GB00E2039SW 602GB50022255SE
602GB50022255PB 602GB50022255SF219 602GB05EG1210PZ 602GB50022255PY 602GB02A1626SW
602GB50022255SW219 602GB50022255PZ219 602GB05E1626SC 602GB00E1405PF 602GB00E1811PC586
602GB00E1626SW 602GB05E1415SZ 602GB05E1419SN 602GB05E1608PB 602GB05E1608SB
602GB00E1811PE416 602GB00E1808PB586 602GB00E1808PE416 602GB05E1608PX416 602GB05E1419PX
602GB05E1608SC 602GB05E1608SC416 602GB02A1608SW219416 602GB02A1626PE586 602GB00E1808PE586
602GB00E1808PF416