Standard Products VRG8601 / 2 / 3 / 4 Rad Hard Dual Adjustable Positive & Negative Voltage Regulator www.aeroflex.com/RadHard June 21, 2007 Common Features Positive Regulator Features Radiation Total Dose - 100KRad - VRG8601/2 - 30KRad - VRG8603/4 1.5A output current Current limited Line regulation .01% typ Output short circuit protected Thermal Shutdown Packaging - Hermetic Metal - Thru-Hole or Surface Mount - 6 Leads, .65" x .42" x .200" - Power Package - Weight - 5 gm max Military and Space Temperature Range DESC SMD: 5962-05219 approved Output voltage adjustable from 1.2V to 37V Load regulation 0.1% typ Ripple rejection 80dB typ Negative Regulator Features Output voltage adjustable range -VRG8601/2 -1.2V to -27V -VRG8603/4 -1.2V to -37V Load regulation 0.3% typ Ripple rejection 77dB typ NOTE: Aeroflex Plainview does not currently have a DSCC certified Radiation Hardened Assurance Program DESCRIPTION The positive (RH117) and a negative (RH137) voltage regulator are capable of supplying in excess of 1.5Amps over the output voltage range as defined under recommended operating conditions. Each regulator is exceptionally easy to set-up, requiring only 2 external resistors to set the output voltage. The module design has been optimized for excellent regulation and low thermal transients. There is full electrical isolation between positive and negative regulators and each to the package. Further, the VRG8601/ 2/ 3/ 4 features internal current limiting, thermal shutdown and safe-area compensation, making them virtually blowout-proof against overloads. The VRG8601/ 2/ 3/ 4 serves a wide variety of applications including local on-card regulation, programmable output voltage regulation or precision current regulation. The VRG8601/ 2/ 3/ 4 has been specifically designed to meet exposure to radiation environments. The VRG8601/ 3 is configured for a Thru-Hole 6 lead metal power package and the VRG860 2/ 4 is configured for a Surface Mount 6 lead metal power package. It is guaranteed operational from -55C to +125C. Available screened to MIL-STD-883, the VRG8601/ 2/ 3/ 4 is ideal for demanding military and space applications. 1 4 ADJ 2 ADJ VOUT VOUT RH117 Positive Regulator RH137 Negative Regulator VIN VIN 3 5 BLOCK DIAGRAM / SCHEMATIC SCD8601 Rev L 6 ABSOLUTE MAXIMUM RATINGS RANGE PARAMETER VRG8601/2 Operating (Junction) Temperature Range -55 to +150 C 300 C -65 to +150 C Lead Temperature (soldering, 10 sec) Storage Temperature Range Input-Output Voltage Differential 40 (Pos) 30 (Neg) Thermal Resistance (junction to case JC) each, Pos. & Neg. UNITS VRG8603/4 40 V 5 C/W 1.999 1/ ESD Rating KV TBD 1/ Meets ESD testing per MIL-STD-883, method 3015, Class 1C. NOTICE: Stresses above those listed under "Absolute Maximums Rating" may cause permanent damage to the device. These are stress rating only; functional operation beyond the "Operation Conditions" is not recommended and extended exposure beyond the "Operation Conditions" may effect device reliability. RECOMMENDED OPERATING CONDITIONS RANGE PARAMETER VRG8601/2 Output Voltage Range Positive Voltage Regulator UNITS VRG8603/4 1.2 to 37 Negative Voltage Regulator -1.2 to -22 Case Operating Temperature Range VDC -1.2 to -37 VDC -55 to +125 C POSITIVE REGULATOR - ELECTRICAL PERFORMANCE CHARACTERISTICS 1/ VRG8601/2 PARAMETER SYM VRG8603/4 CONDITIONS UNITS MIN MAX MIN MAX Reference Voltage VREF 3V < (VIN - VOUT) < VDIFF MAX, 10mA < IOUT < IMAX 1.20 1.30 1.20 1.30 V Line Regulation 2/ VOUT VIN 3V < (VIN - VOUT) < VDIFF MAX, IOUT = 10mA - 0.02 - 0.05 %/V Load Regulation 2/ VOUT IOUT 10mA < IOUT < IMAX, VOUT < 5V 10mA < IOUT < IMAX, VOUT > 5V - 15 0.3 - 15 1 mV % Thermal Regulation IOUT = 1.5A, (VIN - VOUT) = 13.3V, 20ms Pulse, 20W - 0.07 - 0.07 %/W Ripple Rejection Ratio VOUT = 10V, f = 120Hz, CADJ = 10F 66 - 66 - dB - 100 - 100 10mA < IOUT < IMAX - 5 - 5 3.0V < (VIN - VOUT) < 40V, IOUT = 10mA - 5 - 5 A mA Adjustment Pin Current Adjustment Pin Current Change IADJ IADJ A Minimum Load Current 3/ IMIN (VIN - VOUT) = 40V - 5 - 5 Current Limit IMAX (VIN - VOUT) < 15V 1.5 - 1.5 - (VIN - VOUT) = 40V, TC = +25C 0.30 - 0.30 - - 1 - 1 % - 5 - 5 C/W Long Term Stability 3/ Thermal Resistance, each Regulator (Junction to Case) 3/ SCD8601 Rev L 6/21/07 VOUT TIME TA = +125C JC 2 A Aeroflex Plainview NEGATIVE REGULATOR - ELECTRICAL PERFORMANCE CHARACTERISTICS 1/ CONDITIONS PARAMETER VRG8601/2 VRG8603/4 SYM Reference Voltage VREF Line Regulation 2/ VOUT VIN Load Regulation 2/ VOUT IOUT UNITS 3V < (VIN - VOUT) < VDIFF MAX 10mA < IOUT < IMAX MIN MAX MIN MAX -1.200 -1.300 -1.200 -1.300 V 3V < (VIN - VOUT) < 30V, - 0.02 - - 3V < (VIN - VOUT) < 40V, - - - 0.05 10mA < IOUT < IMAX, VOUT < 5V - 25 - 25 mV 10mA < IOUT < IMAX, VOUT > 5V - 0.5 - 1 % Thermal Regulation IOUT = 1.5A, (VIN - VOUT) = 13.3V, 20ms Pulse, 20W - 0.02 - 0.02 %/W Ripple Rejection VOUT = -10V, f = 120Hz, CADJ = 10F 66 - 66 - dB - 100 - 100 10mA < IOUT < IMAX - 5 - 5 3V < (VIN - VOUT) < 30V - 5 - - 3V < (VIN - VOUT) < 40V, TC = +25C - - - 5 (VIN - VOUT) = 30V - 5 - - (VIN - VOUT) < 10V - 3 - 3 Adjustment Pin Current IADJ Adjustment Pin Current Change IADJ Minimum Load Current 3/ Current Limit Long Term Stability 3/ Thermal Resistance, each Regulator (Junction to Case) 3/ IMIN IMAX VOUT TIME %/V A A mA (VIN - VOUT) = 40V - - - 5 (VIN - VOUT) < 15V 1.5 - 1.5 - (VIN - VOUT) = 30V, TC = +25C 0.24 - - - (VIN - VOUT) = 40V, TC = +25C - - 0.24 - TA = +125C - 1 - 1 % - 5 - 5 C/W JC A Notes: 1. Unless otherwise specified, these specifications apply for post radiation, (Vin - Vout) = 5V, Iout = 0.5A and -55C < Tc < +125C. 2. Regulation is measured at a constant junction temperature, using pulse testing with a low duty cycle. Changes in output voltage due to heating effects are covered under the specification for thermal regulation. Measurements taken at the output lead must be adjusted for lead resistance. 3. Not tested. Shall be guaranteed to the specified limits. SCD8601 Rev L 6/21/07 3 Aeroflex Plainview MAXIMUM POWER vs CASE TEMPERATURE 60 50 40 Maximum Power Dissipation (Watts) 30 Both Regulators 20 1 Regulator 10 0 0 20 40 60 80 100 120 140 Case Temperature (C) The maximum Power dissipation is limited by the thermal shutdown function of each regulator chip in the VRG860X. The graph above represents the achievable power before the chip shuts down. The first line in the graph represents the maximum power dissipation of the VRG860X with one regulator on (the other off) and the other line represents both regulators on dissipating equal power. If both regulators are on and one regulator is dissipating more power that the other, the maximum power dissipation of the VRG860X will fall between the two lines. This graph is based on the maximum junction temperature of 150C and a thermal resistance (JC) of 5C/W. TYPICAL APPLICATIONS VRG860X VIN VOUT R1 ADJ VREF = 1.25V, IADJ = 50A R2 +Reg = VOUT = VREF (1+R2/R1) + (IADJ x R2) -Reg = VOUT = -VREF (1+R2/R1) + (-IADJ x R2) Adjustable Regulator SCD8601 Rev L 6/21/07 4 Aeroflex Plainview PACKAGE OUTLINE -- THRU-HOLE POWER PACKAGE .200 .100 .108 .123 o .010 CBA o.145 THRU 2x .028 MAX. M .150 REF. 6 5 2 MAX. TYP. 4 .720 .020 MEASURED LEAD TIP .415 .2075 -C- 1 2 3 ESD/PIN 1 IDENT .230 MIN .415 SQ R.030 TYP. 4 PLCS .655 -B- .122 .003 o .010 BCA .220 MAX. .005 -A- .040 Notes: 1. Dimension Tolerance: .005 inches 2. Package contains BeO substrate 3. Case electrically isolated .030 DIA. .002 o .010 M CBA PIN NUMBERS vs FUNCTION SCD8601 Rev L 6/21/07 PIN FUNCTION 1 Positive ADJ 2 Positive VOUT 3 Positive VIN 4 Negative ADJ 5 Negative VIN 6 Negative VOUT 5 Aeroflex Plainview PACKAGE OUTLINE -- SURFACE MOUNT POWER PACKAGE .200 .100 .108 .123 o .010 .150 REF. CBA o.145 THRU 2x .028 MAX. M 6 5 .060 4 .415 .886 .020 .2075 -C- 1 2 3 ESD/PIN 1 IDENT .415 SQ R.030 TYP. 4 PLCS .655 -B- .122 .003 o .010 BCA .220 MAX. .005 -A- .015 .040 .030 DIA. .002 o .010 M CBA Notes: 1. Dimension Tolerance: .005 inches 2. Package contains BeO substrate 3. Case electrically isolated PIN NUMBERS vs FUNCTION SCD8601 Rev L 6/21/07 PIN FUNCTION 1 Positive ADJ 2 Positive VOUT 3 Positive VIN 4 Negative ADJ 5 Negative VIN 6 Negative VOUT 6 Aeroflex Plainview ORDERING INFORMATION MODEL DESC SMD # SCREENING VGR8601-201-XS VGR8603-201-XS 5962-0521901KXX 5962-0521902KXX VGR8602-201-XS VGR8604-201-XS 5962-0521901KYX 5962-0521902KYX VRG8601-S - DSCC SMD 5962-05219 6 Lead Thru-Hole Power Pkg 6 Lead Surface Mount Power Pkg Military Temperature, -55C to +125C, Screened to the individual test methods of MIL-STD-883. VRG8601-7 Commercial Flow, +25C testing only VRG8602-S Military Temperature, -55C to +125C, Screened to the individual test methods of MIL-STD-883. VRG8602-7 Commercial Flow, +25C testing only VRG8603-S Military Temperature, -55C to +125C, Screened to the individual test methods of MIL-STD-883. VRG8603-7 Commercial Flow, +25C testing only VRG8604-S Military Temperature, -55C to +125C, Screened to the individual test methods of MIL-STD-883. VRG8604-7 Commercial Flow, +25C testing only PLAINVIEW, NEW YORK Toll Free: 800-THE-1553 Fax: 516-694-6715 INTERNATIONAL Tel: 805-778-9229 Fax: 805-778-1980 NORTHEAST Tel: 603-888-3975 Fax: 603-888-4585 SE AND MID-ATLANTIC Tel: 321-951-4164 Fax: 321-951-4254 WEST COAST Tel: 949-362-2260 Fax: 949-362-2266 CENTRAL Tel: 719-594-8017 Fax: 719-594-8468 www.aeroflex.com PACKAGE 6 Lead Thru-Hole Power Pkg 6 Lead Surface Mount Power Pkg 6 Lead Thru-Hole Power Pkg 6 Lead Surface Mount Power Pkg info-ams@aeroflex.com Aeroflex Microelectronic Solutions reserves the right to change at any time without notice the specifications, design, function, or form of its products described herein. All parameters must be validated for each customer's application by engineering. No liability is assumed as a result of use of this product. No patent licenses are implied. Our passion for performance is defined by three attributes represented by these three icons: solution-minded, performance-driven and customer-focused SCD8601 Rev L 6/21/07 7