SUM70060E www.vishay.com Vishay Siliconix N-Channel 100 V (D-S) MOSFET FEATURES PRODUCT SUMMARY VDS (V) 100 RDS(on) () MAX. ID (A) 0.0056 at VGS = 10 V 131 0.0062 at VGS = 7.5 V 129 Qg (TYP.) 53.5 nC * ThunderFET(R) power MOSFET * Maximum 175 C junction temperature * 100 % Rg and UIS tested * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 TO-263 APPLICATIONS D * Power supplies: - Uninterruptible power supplies - AC/DC switch-mode power supplies - Lighting S Top View G * Synchronous rectification D G * DC/DC converter * Motor drive switch Ordering Information: SUM70060E-GE3 (lead (Pb)-free and halogen-free) S * DC/AC inverter * Battery management N-Channel MOSFET ABSOLUTE MAXIMUM RATINGS (TC = 25 C, unless otherwise noted) PARAMETER SYMBOL LIMIT Drain-Source Voltage VDS 100 Gate-Source Voltage VGS 20 Continuous Drain Current (TJ = 150 C) TC = 25 C TC = 125 C Pulsed Drain Current (t = 100 s) Avalanche Current Single Avalanche Energy a Maximum Power Dissipation a Operating Junction and Storage Temperature Range L = 0.1 mH TC = 25 C TC = 125 C ID V 131 75 IDM 240 IAS 50 EAS 125 PD UNIT 375 A mJ b 125 b W TJ, Tstg -55 to +175 C UNIT THERMAL RESISTANCE RATINGS PARAMETER SYMBOL LIMIT Junction-to-Ambient (PCB Mount) c RthJA 40 Junction-to-Case (Drain) RthJC 0.75 C/W Notes a. Duty cycle 1 %. b. See SOA curve for voltage derating. c. When mounted on 1" square PCB (FR4 material). S16-0244-Rev. A, 15-Feb-16 Document Number: 65383 1 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SUM70060E www.vishay.com Vishay Siliconix SPECIFICATIONS (TJ = 25 C, unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT VDS VGS = 0 V, ID = 250 A 100 - - VGS(th) VDS = VGS, ID = 250 A 2 - 4 IGSS VDS = 0 V, VGS = 20 V - - 100 VDS = 100 V, VGS = 0 V - - 1 VDS = 100 V, VGS = 0 V, TJ = 125 C - - 100 VDS = 100 V, VGS = 0 V, TJ = 175 C - - 2 mA VDS 10 V, VGS = 10 V 90 - - A Static Drain-Source Breakdown Voltage Gate Threshold Voltage Gate-Body Leakage Zero Gate Voltage Drain Current On-State Drain Current a Drain-Source On-State Resistance a Forward Transconductance a Dynamic IDSS ID(on) RDS(on) gfs VGS = 10 V, ID = 30 A - 0.0046 0.0056 VGS = 7.5 V, ID = 30 A - 0.0048 0.0062 VDS = 15 V, ID = 30 A - 85 - - 3330 - V nA A S b Input Capacitance Ciss Output Capacitance Coss - 1395 - Reverse Transfer Capacitance Crss - 95 - Total Gate Charge c Qg - 53.5 81 Gate-Source Charge c Gate-Drain Charge c VDS = 50 V, VGS = 10 V, ID = 30 A - 14.5 - - 13.2 - f = 1 MHz 0.9 1.9 3.8 - 13 26 VDD = 50 V, RL = 1.67 ID 30 A, VGEN = 10 V, Rg = 1 - 22 44 - 27 54 - 9 18 Qgd Gate Resistance Turn-On Delay Time Qgs VGS = 0 V, VDS = 50 V, f = 1 MHz Rg c Rise Time c Turn-Off Delay Time c Fall Time c td(on) tr td(off) tf pF nC ns Drain-Source Body Diode Ratings and Characteristics b (TC = 25 C) Pulsed Current (t = 100 s) ISM Forward Voltage a VSD Reverse Recovery Time Peak Reverse Recovery Charge Reverse Recovery Charge IF = 30 A, VGS = 0 V trr IRM(REC) Qrr IF = 30 A, di/dt = 100 A/s - - 240 A - 0.86 1.4 V - 88 176 ns - 5 10 A - 0.22 0.44 C Notes a. Pulse test; pulse width 300 s, duty cycle 2 %. b. Guaranteed by design, not subject to production testing. c. Independent of operating temperature. Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. S16-0244-Rev. A, 15-Feb-16 Document Number: 65383 2 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SUM70060E www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise noted) Axis Title Axis Title 250 200 10000 10000 VGS = 10 V thru 7 V 100 100 VGS = 5 V 50 1000 120 1st line 2nd line 1000 VGS = 6 V 150 2nd line ID - Drain Current (A) 160 1st line 2nd line 2nd line ID - Drain Current (A) 200 80 TC = 25 C 100 40 TC = 125 C VGS = 4 V 0 0 1 2 3 4 TC = -55 C 0 10 5 10 0 2 4 6 8 VDS - Drain-to-Source Voltage (V) 2nd line VGS - Gate-to-Source Voltage (V) 2nd line Output Characteristics Transfer Characteristics Axis Title 10 Axis Title 100 10000 10000 0.007 1000 60 TC = 125 C 40 100 20 0 0 5.0 10.0 15.0 20.0 25.0 0.006 0.005 10 0 20 On-Resistance vs. Drain Current Axis Title 100 Crss 0 10 60 80 100 10000 ID = 30 A 8 1000 6 1st line 2nd line Coss 2nd line VGS - Gate-to-Source Voltage (V) 1000 Ciss 3600 40 4 VDS = 25 V, 50 V, and 75 V 100 2 0 10 0 11 22 33 44 VDS - Drain-to-Source Voltage (V) 2nd line Qg - Total Gate Charge (nC) 2nd line Capacitance Gate Charge S16-0244-Rev. A, 15-Feb-16 100 10 1st line 2nd line 2nd line C - Capacitance (pF) 80 Transconductance 4800 20 60 ID - Drain Current (A) 2nd line 10000 0 40 ID - Drain Current (A) 2nd line Axis Title 1200 100 VGS = 10 V 0.004 0.003 10 30.0 6000 2400 1000 VGS = 7.5 V 1st line 2nd line TC = 25 C 2nd line RDS(on) - On-Resistance () 80 1st line 2nd line 2nd line gfs - Transconductance (S) TC = -55 C 55 Document Number: 65383 3 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SUM70060E www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise noted) Axis Title Axis Title 1.0 10000 10000 ID = 30 A 0.4 1000 1.4 VGS = 7.5 V 1.1 100 2nd line VGS(th) - Variance (V) VGS = 10 V 0.8 1000 -0.2 ID = 5 mA -0.8 -2.0 10 -50 -25 0 25 50 75 100 125 150 175 10 -50 -25 0 25 75 100 125 150 175 TJ - Temperature (C) 2nd line On-Resistance vs. Junction Temperature Threshold Voltage Axis Title Axis Title 0.02 100 TJ = 125 C 0.01 TJ = 25 C 2 4 6 8 10 ID = 250 A 120 1000 1st line 2nd line 1000 2nd line VDS - Drain-to-Source Voltage (V) 0.04 0.03 10000 125 10000 1st line 2nd line 2nd line RDS(on) - On-Resistance () 50 TJ - Junction Temperature (C) 2nd line 0.05 115 100 110 105 10 10 -50 -25 0 25 50 75 100 125 150 175 VGS - Gate-to-Source Voltage (V) 2nd line TJ - Temperature (C) 2nd line On-Resistance vs. Gate-to-Source Voltage Drain Source Breakdown vs. Junction Temperature Axis Title Axis Title 100 150 10000 10 10000 TJ = 25 C 0.1 100 0.01 1000 90 1st line 2nd line 1000 1 2nd line ID - Drain Current (A) 120 TJ = 150 C 1st line 2nd line 2nd line IS - Source Current (A) 100 ID = 250 A -1.4 0.5 0 1st line 2nd line 1.7 1st line 2nd line 2nd line RDS(on) - On-Resistance (Normalized) 2.0 60 100 30 0.001 10 0 0.2 0.4 0.6 0.8 1.0 1.2 0 10 0 25 50 75 100 125 VSD - Source-to-Drain Voltage (V) 2nd line TC - Case Temperature (C) 2nd line Source Drain Diode Forward Voltage Current De-Rating S16-0244-Rev. A, 15-Feb-16 150 175 Document Number: 65383 4 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SUM70060E www.vishay.com Vishay Siliconix THERMAL RATINGS (TA = 25 C, unless otherwise noted) Axis Title Axis Title 10000 1000 100 10000 100 s ID limited 1000 1 ms 1000 10 10 ms 1st line 2nd line Limited by RDS(on) (1) 2nd line IDAV (A) 100 1st line 2nd line 2nd line ID - Drain Current (A) IDM limited 25 C 150 C 100 100 100 ms, 1 s, 10 s, DC 1 TC = 25 C Single pulse BVDSS limited 0.1 0.1 (1) 1 10 100 10 1000 10 0.00001 0.0001 VDS - Drain-to-Source Voltage (V) VGS > minimum VGS at which RDS(on) is specified 10 0.01 0.001 Time (s) 2nd line Safe Operating Area IDAV vs. Time Axis Title 10000 Duty Cycle = 0.5 Notes: 0.2 1000 1st line 2nd line Normalized Effective Transient Thermal Impedance 1 PDM 0.1 0.1 0.05 t1 t2 t 1. Duty cycle, D = t1 2 2. Per unit base = RthJA = 40 C/W 0.02 Single pulse 3. TJM - TA = PDMZthJA 100 (t) 4. Surface mounted 0.01 0.001 0.01 0.1 1 10 100 10 1000 Square Wave Pulse Duration (s) 2nd line Normalized Thermal Transient Impedance, Junction-to-Ambient S16-0244-Rev. A, 15-Feb-16 Document Number: 65383 5 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SUM70060E www.vishay.com Vishay Siliconix THERMAL RATINGS (TA = 25 C, unless otherwise noted) Axis Title 10000 Duty Cycle = 0.5 0.2 1000 0.1 0.1 1st line 2nd line Normalized Effective Transient Thermal Impedance 1 0.05 0.02 100 Single pulse 0.01 0.0001 0.001 0.01 0.1 1 10 Square Wave Pulse Duration (s) 2nd line Normalized Thermal Transient Impedance, Junction-to-Case Note * The characteristics shown in the two graphs - Normalized Transient Thermal Impedance Junction to Ambient (25 C) - Normalized Transient Thermal Impedance Junction to Case (25 C) are given for general guidelines only to enable the user to get a "ball park" indication of part capabilities. The data are extracted from single pulse transient thermal impedance characteristics which are developed from empirical measurements. The latter is valid for the part mounted on printed circuit board - FR4, size 1" x 1" x 0.062", double sided with 2 oz. copper, 100 % on both sides. The part capabilities can widely vary depending on actual application parameters and operating conditions. Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?65383. S16-0244-Rev. A, 15-Feb-16 Document Number: 65383 6 For technical questions, contact: pmostechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Package Information www.vishay.com Vishay Siliconix TO-263 (D2PAK): 3-LEAD -B- L2 6 E1 K D4 -A- c2 D2 D3 A E L3 L D D1 E3 A A b2 b e c Detail "A" E2 0.010 M A M 2 PL 0 L4 -5 INCHES L1 DETAIL A (ROTATED 90) c* c c1 c1 M b b1 SECTION A-A MIN. MAX. MIN. MAX. A 0.160 0.190 4.064 4.826 b 0.020 0.039 0.508 0.990 b1 0.020 0.035 0.508 0.889 1.397 b2 0.045 0.055 1.143 Thin lead 0.013 0.018 0.330 0.457 Thick lead 0.023 0.028 0.584 0.711 Thin lead 0.013 0.017 0.330 0.431 Thick lead 0.023 0.027 0.584 0.685 c2 0.045 0.055 1.143 1.397 D 0.340 0.380 8.636 9.652 D1 0.220 0.240 5.588 6.096 D2 0.038 0.042 0.965 1.067 D3 0.045 0.055 1.143 1.397 D4 0.044 0.052 1.118 1.321 E 0.380 0.410 9.652 10.414 E1 0.245 - 6.223 - E2 0.355 0.375 9.017 9.525 E3 0.072 0.078 1.829 1.981 e Notes 1. Plane B includes maximum features of heat sink tab and plastic. 2. No more than 25 % of L1 can fall above seating plane by max. 8 mils. 3. Pin-to-pin coplanarity max. 4 mils. 4. *: Thin lead is for SUB, SYB. Thick lead is for SUM, SYM, SQM. 5. Use inches as the primary measurement. 6. This feature is for thick lead. Revison: 30-Sep-13 MILLIMETERS DIM. 0.100 BSC 2.54 BSC K 0.045 0.055 1.143 1.397 L 0.575 0.625 14.605 15.875 L1 0.090 0.110 2.286 2.794 L2 0.040 0.055 1.016 1.397 L3 0.050 0.070 1.270 1.778 L4 M 0.010 BSC - 0.254 BSC 0.002 - 0.050 ECN: T13-0707-Rev. K, 30-Sep-13 DWG: 5843 1 Document Number: 71198 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 AN826 Vishay Siliconix RECOMMENDED MINIMUM PADS FOR D2PAK: 3-Lead 0.420 0.355 0.635 (16.129) (9.017) (10.668) 0.145 (3.683) 0.135 (3.429) 0.200 0.050 (5.080) (1.257) Recommended Minimum Pads Dimensions in Inches/(mm) Return to Index Document Number: 73397 11-Apr-05 www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2021 1 Document Number: 91000