ACDC
Specification
15130 Watts
•Output Voltages from 2.5 V to 48 V
•Nonstandard Outputs Available
•Universal Input
•Single & Multiple Output Versions
•0 °C to +60 °C Operating Temperature
•Efficiency up to 80%
•Nonstandard Connectors Available
AEH Series
Input
Input Voltage • 90-264 VAC
Input Frequency • 47-63 Hz
Input Current • 0.4/0.26 A for AEH15, at 115/230 VAC
1.5/0.7 A for AEH45, at 115/230 VAC
1.9/1.5 A for AEH80, at 115/230 VAC
3.2/1.7 A for AEH130, at 115/230 VAC
Inrush Current • AEH15, 45 & 80: 30 A max at 230 VAC
AEH130: 60 A max at 230 VAC
cold start
Earth Leakage Current • <0.5 mA max at 115 VAC/60 Hz
<0.75 mA max at 230 VAC/50 Hz
Power Factor • EN61000-3-2 class A
Output
Output Voltage • See tables, non-standard voltages
available - contact sales
Initial Set Accuracy • 5%
Start Up Delay • 2 s max
Hold Up Time • 16 ms min (>50 ms AEH130)
Line Regulation • See tables
Load Regulation • See tables
Transient Response • 4% max deviation, recovery to within
1% in 4 ms for a 50% load change
Ripple & Noise • 2% pk-pk for outputs ≤3.3 V
1% pk-pk for all other outputs
20 MHz bandwidth
Overvoltage Protection • 112-132% Vnom, auto reset
Overload Protection • Output 1 only 110-150% of nominal
(AEH15 Output protected to short circuit)
Temperature • ±0.04%/°C max
Coefficient
xppower.com
General
Efficiency • Up to 80%
Isolation • 3000 VAC Input to Output
1500 VAC Input to Ground
500 VAC Output to Ground
Switching Frequency • 65-80 kHz for AEH15
67-83 kHz for AEH45
58 kHz typical for AEH80
53-76 kHz for AEH130
MTBF • 100 kHrs per MIL-HDBK-217F at 25 °C
GB
Environmental
Operating Temperature • 0 °C to +60 °C, derate linearly from 100%
load at +40 °C to 50% load at +70 °C
Operating Humidity • 5-95% RH, non-condensing
Storage Temperature • -40 °C to +85 °C
Vibration • 2 g on 3 axes
EMC & Safety
Emissions • EN55022 level B, conducted and radiated
Harmonic Currents • EN61000-3-2, Class A
Voltage Flicker • EN61000-3-3
ESD Immunity • EN61000-4-2, level 2 Perf Criteria A
Radiated Immunity • EN61000-4-3, level 3 Perf Criteria A
EFT/Burst • EN61000-4-4, level 2 Perf Criteria A
Surge • EN61000-4-5, level 3 Perf Criteria A
Conducted Immunity • EN61000-4-6, level 2 Perf Criteria A
Dips & Interruptions • EN61000-4-11 30% 10 ms,
60% 100 ms, 100% 5000 ms
Perf Criteria A, B, B
Safety Approvals • EN60950-1, UL60950-1,
CSA C22.2 No. 950 per cUL, CE Mark
2
ACDC
Notes
1. Factory-set non-standard outputs available. 2. Total regulation includes initial set accuracy, line and load regulation.
1.42
(36.0)
AC Input
IEC 320 Inlet
1.5
(38.0)
3.58 (91.0)
Notes
1. Dimensions shown in inches (mm).
2. Tolerance 0.02 (0.5) max.
3. Output connector is 5.5mm outer diameter barrel. Inner diameter is 2.5mm with centre positive (+) and outer shell negative (-).
4. Output cable length is 72.0 (1830).
5. Optional output connectors available, contact sales office.
6. Weight 0.36 lb (165 g) approx.
7. For UK mains lead order part: UK-MAINS-IEC.
For European mains lead order part: EU-MAINS-IEC.
AEH15
Models and Ratings
Mechanical Details
Output
Power
Output Voltage
Nominal(1)
Output Current Total
Regulation(2)
Model
Number
Minimum Maximum
8.25 W 3.3 V 0.0 A 2.50 A 7% AEH15US03
12.00 W 5.0 V 0.0 A 2.40 A 5% AEH15US05
12.00 W 7.0 V 0.0 A 1.70 A 5% AEH15US07
15.00 W 10.0 V 0.0 A 1.50 A 5% AEH15US10
15.00 W 12.0 V 0.0 A 1.25 A 5% AEH15US12
15.00 W 15.0 V 0.0 A 1.00 A 5% AEH15US15
15.00 W 18.0 V 0.0 A 0.83 A 5% AEH15US18
15.00 W 24.0 V 0.0 A 0.62 A 5% AEH15US24
15.00 W 30.0 V 0.0 A 0.50 A 5% AEH15US30
15.00 W 36.0 V 0.0 A 0.42 A 3% AEH15US36
15.00 W 48.0 V 0.0 A 0.31 A 3% AEH15US48
3
ACDC
AEH45
Models and Ratings
Notes
Mechanical Details
Output
Power
Max
Output 1(1,2) Output 2(1,2) Output 3(1,2)
Model
Number
Voltage
Nom.
Current Voltage
Nom.
Current Voltage
Nom.
Current
Min Max Min Max Min Max
20 W 2.5 V 0.0 A 8.0 A AEH45US02
26 W 3.3 V 0.0 A 8.0 A AEH45US03
40 W 5.0 V 0.0 A 8.0 A AEH45US05
42 W 7.0 V 0.0 A 6.0 A AEH45US07
45 W 10.0 V 0.0 A 4.5 A AEH45US10
44 W 12.0 V 0.0 A 3.7 A AEH45US12
44 W 15.0 V 0.0 A 2.9 A AEH45US15
44 W 18.0 V 0.0 A 2.4 A AEH45US18
48 W 24.0 V 0.0 A 2.0 A AEH45US24
50 W 30.0 V 0.0 A 1.7 A AEH45US30
50 W 36.0 V 0.0 A 1.4 A AEH45US36
50 W 48.0 V 0.0 A 1.0 A AEH45US48
42 W +12.0 V 0.5 A 3.0 A -12.0 V 0.2 A 1.0 A AEH45UM21
42 W +15.0 V 0.5 A 2.0 A -15.0 V 0.2 A 1.0 A AEH45UM22
42 W +5.0 V 0.5 A 5.0 A +12.0 V 0.2 A 2.0 A AEH45UM23
42 W +5.0 V 0.5 A 5.0 A +15.0 V 0.2 A 1.5 A AEH45UM26
42 W +5.0 V 0.5 A 5.0 A +24.0 V 0.1 A 1.0 A AEH45UM25
42 W +5.0 V 0.5 A 5.0 A -24.0 V 0.1 A 1.0 A AEH45UM27
27 W +3.3 V 0.5 A 5.0 A +5.0 V 0.1 A 2.0 A AEH45UM28
40 W +3.3 V 0.5 A 5.0 A +12.0 V 0.2 A 2.0 A AEH45UM29
42 W +5.0 V 0.5 A 5.0 A +12.0 V 0.2 A 2.0 A -5.0 V 0.0 A 0.8 A AEH45UM33
42 W +5.0 V 0.5 A 5.0 A +12.0 V 0.2 A 2.0 A -12.0 V 0.0 A 0.8 A AEH45UM31
42 W +5.0 V 0.5 A 5.0 A +15.0 V 0.2 A 2.0 A -15.0 V 0.0 A 0.8 A AEH45UM32
40 W +3.3 V 0.5 A 5.2 A +12.0 V 0.2 A 2.0 A -5.0 V 0.0 A 0.8 A AEH45UM34
42 W +3.3 V 0.5 A 5.0 A +12.0 V 0.2 A 2.0 A -12.0 V 0.0 A 0.8 A AEH45UM35
42 W +5.0 V 0.5 A 5.0 A +24.0 V 0.1 A 1.0 A -12.0 V 0.0 A 0.8 A AEH45UM38
42 W +5.0 V 0.5 A 5.0 A +24.0 V 0.1 A 1.0 A -24.0 V 0.0 A 0.5 A AEH45UM39
1. Factory-set non-standard outputs available. 2. Total regulation includes initial set accuracy, line and load regulation and is
typically 3% for output 1 and 5% for auxiliaries.
5.75 (146.0) ±1.0
2.99 (76.0)
AC Input
IEC 320-C14 Inlet
1.69
(43.0)
DC Output
5 Pin Plug
Notes
1. Dimensions shown in inches (mm).
2. Tolerance 0.02 (0.5) max.
3. Output cable length is 48” (1220 mm) approx.
4. Optional output connectors available, contact sales.
5. Weight 0.9-1.1 lb (400-500 g) approx.
6. For UK mains lead order part: UK-MAINS-IEC.
For European mains lead order part: EU-MAINS-IEC.
7. For mating DIN connector, use standard 5 pin 180° socket.
3
1
4
2
5
DC OUTPUT
PIN CONNECTIONS
Pin SINGLE DUAL TRIPLE
Shell GND GND GND
1 Common Common Common
2 Common Common Common
3 Output Output 1 Output 1
4 Common Common Output 3
5 Output Output 2 Output 2
4
ACDC
AEH80
Models and Ratings
Mechanical Details
Notes
Output
Power
Max
Output 1(1,2) Output 2(1,2) Output 3(1,2)
Model
Number
Voltage
Nom.
Current Voltage
Nom.
Current Voltage
Nom.
Current
Min Max Min Max Min Max
50 W 3.3 V 0.0 A 15.1 A AEH80US03
65 W 5.0 V 0.0 A 13.0 A AEH80US05
70 W 7.0 V 0.0 A 9.9 A AEH80US07
75 W 10.0 V 0.0 A 7.5 A AEH80US10
80 W 12.0 V 0.0 A 6.6 A AEH80US12
80 W 15.0 V 0.0 A 5.3 A AEH80US15
80 W 18.0 V 0.0 A 4.4 A AEH80US18
80 W 24.0 V 0.0 A 3.3 A AEH80US24
80 W 30.0 V 0.0 A 2.6 A AEH80US30
80 W 36.0 V 0.0 A 2.2 A AEH80US36
80 W 48.0 V 0.0 A 1.6 A AEH80US48
60 W +5.0 V 0.7 A 7.0 A +12.0 V 0.3 A 3.0 A AEH80UM23
60 W +5.0 V 1.4 A 7.0 A +15.0 V 0.6 A 3.0 A AEH80UM26
60 W +5.0 V 1.4 A 7.0 A +24.0 V 0.2 A 2.0 A AEH80UM25
60 W +5.0 V 1.4 A 7.0 A -24.0 V 0.2 A 2.0 A AEH80UM29
38 W +3.3 V 1.4 A 7.0 A +5.0 V 0.6 A 3.0 A AEH80UM28
56 W +3.3 V 0.7 A 7.0 A +12.0 V 0.5 A 3.0 A AEH80UM27
65 W +5.0 V 0.6 A 6.0 A +12.0 V 0.3 A 3.0 A -5.0 V 0.0 A 0.8 A AEH80UM33
65 W +5.0 V 0.6 A 6.0 A +12.0 V 0.3 A 3.0 A -12.0 V 0.0 A 0.8 A AEH80UM31
65 W +5.0 V 0.6 A 6.0 A +15.0 V 0.3 A 2.1 A -15.0 V 0.0 A 0.8 A AEH80UM32
63 W +3.3 V 0.7 A 7.0 A +12.0 V 0.6 A 3.0 A -5.0 V 0.0 A 0.8 A AEH80UM34
65 W +3.3 V 1.4 A 7.0 A +12.0 V 0.6 A 3.0 A -12.0 V 0.1 A 0.8 A AEH80UM37
65 W +5.0 V 0.7 A 7.0 A +24.0 V 0.2 A 2.0 A -24.0 V 0.0 A 0.8 A AEH80UM38
65 W +5.0 V 0.6 A 6.0 A +24.0 V 0.2 A 2.0 A -12.0 V 0.0 A 0.8 A AEH80UM39
6.61 (167.9) ±1.0
3.09 (78.5)
AC Input
IEC 320-C14 Inlet
1.75
(44.5)
DC Output
5 Pin Plug
DC Output
8 Pin Plug
Notes
1. Dimensions shown in inches (mm).
2. Tolerance 0.02 (0.5) max.
3. Output cable length is 48” (1220mm) approx.
4. Optional output connectors available, contact sales.
5. Weight 0.9-1.1 lb (400-500 g) approx.
6. For UK mains lead order part: UK-MAINS-IEC,
For European mains lead order part: EU-MAINS-IEC.
PIN CONNECTIONS
Pin SINGLES DUAL TRIPLE
03, 05 V 07-48 V
Shell GND GND GND GND
1 Common Common Common Common
2 Common Common Output 2 Output 3
3 Output Output Output 1 Output 1
4 Common Common Output 2 Output 2
5 Output Output Output 1 Output 2
6 Common Common Common
7 Output Output 1 Output 1
8 Output Common Output 3
3
1
4
2
5
DC OUTPUT
3
1
2
5
87
6
4
1. Factory-set non-standard outputs available.
2. Total regulation includes initial set accuracy, line and load regulation and is typically 3% for output 1 and 5% for auxiliaries.
508-April-14
AEH130
Models and Ratings
Mechanical Details
Notes
Output
Power
Max
Output 1(1,2) Output 2(1,2)
Model
Number
Voltage
Nom.
Current Total
Regulation
Voltage
Nom.
Current Total
Regulation
Min Max Min Max
90 W 3.3 V 0.0 A 27.2 A 7% AEH130PS3V3
115 W 5.0 V 0.0 A 23.0 A 7% AEH130PS05
130 W 7.0 V 0.0 A 18.5 A 7% AEH130PS07
130 W 9.0 V 0.0 A 14.4 A 5% AEH130PS09
130 W 12.0 V 0.0 A 10.8 A 5% AEH130PS12
130 W 15.0 V 0.0 A 8.6 A 5% AEH130PS15
130 W 18.0 V 0.0 A 7.2 A 5% AEH130PS18
130 W 24.0 V 0.0 A 5.4 A 5% AEH130PS24
130 W 28.0 V 0.0 A 4.6 A 5% AEH130PS28
130 W 36.0 V 0.0 A 3.6 A 5% AEH130PS36
130 W 48.0 V 0.0 A 2.7 A 3% AEH130PS48
130 W 54.0 V 0.0 A 2.4 A 3% AEH130PS54
90 W +3.3 V 4.0 A 20.0 A 10% +12.0 V 0.2 A 2.0 A 5% AEH130PD01
120 W +5.0 V 4.0 A 20.0 A 7% +12.0 V 0.2 A 2.0 A 5% AEH130PD02
120 W +5.0 V 4.0 A 20.0 A 7% +15.0 V 0.2 A 2.0 A 5% AEH130PD03
120 W +5.0 V 4.0 A 20.0 A 7% +24.0 V 0.2 A 2.0 A 5% AEH130PD04
1. Factory-set non-standard outputs available.
2. Total regulation includes initial set accuracy, line and load regulation.
7.71 (196.0) ±1.0 3.46 (88.0)
0.85
(21.5)
1.14
(29.0)
AC Input
IEC 320-C14 Inlet
3
1
2
5
87
6
4
PIN CONNECTIONS
Pin SINGLE DUAL
Shell GND GND
1 Common Common
2 Common Output 2
3 Output Output 1
4 Common Output 2
5 Output Output 1
6 Common Common
7 Output Output 1
8 Output Common
1. Dimensions shown in inches (mm).
2. Tolerance 0.02 (0.5) max.
3. Output cable length is 48” (1220mm) approx.
4. Optional output connectors available, contact sales.
5. Weight 1.9 lb (860 g) approx.
6. For UK mains lead order part: UK-MAINS-IEC, For European mains lead order part: EU-MAINS-IEC.
Notes
ACDC
